linux/kernel/bpf/hashtab.c, branch v5.4

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-18T03:20:36Z

Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295

2019-06-05T15:36:38Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman

bpf: move memory size checks to bpf_map_charge_init()

2019-05-31T23:52:56Z

Most bpf map types doing similar checks and bytes to pages conversion during memory allocation and charging. Let's unify these checks by moving them into bpf_map_charge_init(). Signed-off-by: Roman Gushchin Acked-by: Song Liu Signed-off-by: Alexei Starovoitov

bpf: rework memlock-based memory accounting for maps

2019-05-31T23:52:56Z

In order to unify the existing memlock charging code with the memcg-based memory accounting, which will be added later, let's rework the current scheme. Currently the following design is used: 1) .alloc() callback optionally checks if the allocation will likely succeed using bpf_map_precharge_memlock() 2) .alloc() performs actual allocations 3) .alloc() callback calculates map cost and sets map.memory.pages 4) map_create() calls bpf_map_init_memlock() which sets map.memory.user and performs actual charging; in case of failure the map is destroyed 1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which performs uncharge and releases the user 2) .map_free() callback releases the memory The scheme can be simplified and made more robust: 1) .alloc() calculates map cost and calls bpf_map_charge_init() 2) bpf_map_charge_init() sets map.memory.user and performs actual charge 3) .alloc() performs actual allocations 1) .map_free() callback releases the memory 2) bpf_map_charge_finish() performs uncharge and releases the user The new scheme also allows to reuse bpf_map_charge_init()/finish() functions for memcg-based accounting. Because charges are performed before actual allocations and uncharges after freeing the memory, no bogus memory pressure can be created. In cases when the map structure is not available (e.g. it's not created yet, or is already destroyed), on-stack bpf_map_memory structure is used. The charge can be transferred with the bpf_map_charge_move() function. Signed-off-by: Roman Gushchin Acked-by: Song Liu Signed-off-by: Alexei Starovoitov

bpf: group memory related fields in struct bpf_map_memory

2019-05-31T23:52:56Z

Group "user" and "pages" fields of bpf_map into the bpf_map_memory structure. Later it can be extended with "memcg" and other related information. The main reason for a such change (beside cosmetics) is to pass bpf_map_memory structure to charging functions before the actual allocation of bpf_map. Signed-off-by: Roman Gushchin Acked-by: Song Liu Signed-off-by: Alexei Starovoitov

bpf, lru: avoid messing with eviction heuristics upon syscall lookup

2019-05-14T17:47:29Z

One of the biggest issues we face right now with picking LRU map over regular hash table is that a map walk out of user space, for example, to just dump the existing entries or to remove certain ones, will completely mess up LRU eviction heuristics and wrong entries such as just created ones will get evicted instead. The reason for this is that we mark an entry as "in use" via bpf_lru_node_set_ref() from system call lookup side as well. Thus upon walk, all entries are being marked, so information of actual least recently used ones are "lost". In case of Cilium where it can be used (besides others) as a BPF based connection tracker, this current behavior causes disruption upon control plane changes that need to walk the map from user space to evict certain entries. Discussion result from bpfconf [0] was that we should simply just remove marking from system call side as no good use case could be found where it's actually needed there. Therefore this patch removes marking for regular LRU and per-CPU flavor. If there ever should be a need in future, the behavior could be selected via map creation flag, but due to mentioned reason we avoid this here. [0] http://vger.kernel.org/bpfconf.html Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH") Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

bpf: add program side {rd, wr}only support for maps

2019-04-10T00:05:46Z

This work adds two new map creation flags BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG in order to allow for read-only or write-only BPF maps from a BPF program side. Today we have BPF_F_RDONLY and BPF_F_WRONLY, but this only applies to system call side, meaning the BPF program has full read/write access to the map as usual while bpf(2) calls with map fd can either only read or write into the map depending on the flags. BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG allows for the exact opposite such that verifier is going to reject program loads if write into a read-only map or a read into a write-only map is detected. For read-only map case also some helpers are forbidden for programs that would alter the map state such as map deletion, update, etc. As opposed to the two BPF_F_RDONLY / BPF_F_WRONLY flags, BPF_F_RDONLY_PROG as well as BPF_F_WRONLY_PROG really do correspond to the map lifetime. We've enabled this generic map extension to various non-special maps holding normal user data: array, hash, lru, lpm, local storage, queue and stack. Further generic map types could be followed up in future depending on use-case. Main use case here is to forbid writes into .rodata map values from verifier side. Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-02-08T23:00:17Z

An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller

bpf: introduce BPF_F_LOCK flag

2019-02-01T19:55:39Z

Introduce BPF_F_LOCK flag for map_lookup and map_update syscall commands and for map_update() helper function. In all these cases take a lock of existing element (which was provided in BTF description) before copying (in or out) the rest of map value. Implementation details that are part of uapi: Array: The array map takes the element lock for lookup/update. Hash: hash map also takes the lock for lookup/update and tries to avoid the bucket lock. If old element exists it takes the element lock and updates the element in place. If element doesn't exist it allocates new one and inserts into hash table while holding the bucket lock. In rare case the hashmap has to take both the bucket lock and the element lock to update old value in place. Cgroup local storage: It is similar to array. update in place and lookup are done with lock taken. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

bpf: introduce bpf_spin_lock

2019-02-01T19:55:38Z

Introduce 'struct bpf_spin_lock' and bpf_spin_lock/unlock() helpers to let bpf program serialize access to other variables. Example: struct hash_elem { int cnt; struct bpf_spin_lock lock; }; struct hash_elem * val = bpf_map_lookup_elem(&hash_map, &key); if (val) { bpf_spin_lock(&val->lock); val->cnt++; bpf_spin_unlock(&val->lock); } Restrictions and safety checks: - bpf_spin_lock is only allowed inside HASH and ARRAY maps. - BTF description of the map is mandatory for safety analysis. - bpf program can take one bpf_spin_lock at a time, since two or more can cause dead locks. - only one 'struct bpf_spin_lock' is allowed per map element. It drastically simplifies implementation yet allows bpf program to use any number of bpf_spin_locks. - when bpf_spin_lock is taken the calls (either bpf2bpf or helpers) are not allowed. - bpf program must bpf_spin_unlock() before return. - bpf program can access 'struct bpf_spin_lock' only via bpf_spin_lock()/bpf_spin_unlock() helpers. - load/store into 'struct bpf_spin_lock lock;' field is not allowed. - to use bpf_spin_lock() helper the BTF description of map value must be a struct and have 'struct bpf_spin_lock anyname;' field at the top level. Nested lock inside another struct is not allowed. - syscall map_lookup doesn't copy bpf_spin_lock field to user space. - syscall map_update and program map_update do not update bpf_spin_lock field. - bpf_spin_lock cannot be on the stack or inside networking packet. bpf_spin_lock can only be inside HASH or ARRAY map value. - bpf_spin_lock is available to root only and to all program types. - bpf_spin_lock is not allowed in inner maps of map-in-map. - ld_abs is not allowed inside spin_lock-ed region. - tracing progs and socket filter progs cannot use bpf_spin_lock due to insufficient preemption checks Implementation details: - cgroup-bpf class of programs can nest with xdp/tc programs. Hence bpf_spin_lock is equivalent to spin_lock_irqsave. Other solutions to avoid nested bpf_spin_lock are possible. Like making sure that all networking progs run with softirq disabled. spin_lock_irqsave is the simplest and doesn't add overhead to the programs that don't use it. - arch_spinlock_t is used when its implemented as queued_spin_lock - archs can force their own arch_spinlock_t - on architectures where queued_spin_lock is not available and sizeof(arch_spinlock_t) != sizeof(__u32) trivial lock is used. - presence of bpf_spin_lock inside map value could have been indicated via extra flag during map_create, but specifying it via BTF is cleaner. It provides introspection for map key/value and reduces user mistakes. Next steps: - allow bpf_spin_lock in other map types (like cgroup local storage) - introduce BPF_F_LOCK flag for bpf_map_update() syscall and helper to request kernel to grab bpf_spin_lock before rewriting the value. That will serialize access to map elements. Acked-by: Peter Zijlstra (Intel) Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann