linux/kernel/bpf/syscall.c, branch v4.19

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-08-15T22:04:25Z

Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-08-13T19:23:39Z

Pull locking/atomics update from Thomas Gleixner: "The locking, atomics and memory model brains delivered: - A larger update to the atomics code which reworks the ordering barriers, consolidates the atomic primitives, provides the new atomic64_fetch_add_unless() primitive and cleans up the include hell. - Simplify cmpxchg() instrumentation and add instrumentation for xchg() and cmpxchg_double(). - Updates to the memory model and documentation" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) locking/atomics: Rework ordering barriers locking/atomics: Instrument cmpxchg_double*() locking/atomics: Instrument xchg() locking/atomics: Simplify cmpxchg() instrumentation locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation tools/memory-model: Rename litmus tests to comply to norm7 tools/memory-model/Documentation: Fix typo, smb->smp sched/Documentation: Update wake_up() & co. memory-barrier guarantees locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock() sched/core: Use smp_mb() in wake_woken_function() tools/memory-model: Add informal LKMM documentation to MAINTAINERS locking/atomics/Documentation: Describe atomic_set() as a write operation tools/memory-model: Make scripts executable tools/memory-model: Remove ACCESS_ONCE() from model tools/memory-model: Remove ACCESS_ONCE() from recipes locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example MAINTAINERS: Add Daniel Lustig as an LKMM reviewer tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name tools/memory-model: Add litmus test for full multicopy atomicity locking/refcount: Always allow checked forms ...

bpf: decouple btf from seq bpf fs dump and enable more maps

2018-08-12T22:52:45Z

Commit a26ca7c982cb ("bpf: btf: Add pretty print support to the basic arraymap") and 699c86d6ec21 ("bpf: btf: add pretty print for hash/lru_hash maps") enabled support for BTF and dumping via BPF fs for array and hash/lru map. However, both can be decoupled from each other such that regular BPF maps can be supported for attaching BTF key/value information, while not all maps necessarily need to dump via map_seq_show_elem() callback. The basic sanity check which is a prerequisite for all maps is that key/value size has to match in any case, and some maps can have extra checks via map_check_btf() callback, e.g. probing certain types or indicating no support in general. With that we can also enable retrieving BTF info for per-cpu map types and lpm. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: Yonghong Song

bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY

2018-08-10T23:58:46Z

This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY. To unleash the full potential of a bpf prog, it is essential for the userspace to be capable of directly setting up a bpf map which can then be consumed by the bpf prog to make decision. In this case, decide which SO_REUSEPORT sk to serve the incoming request. By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control and visibility on where a SO_REUSEPORT sk should be located in a bpf map. The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that the bpf prog can directly select a sk from the bpf map. That will raise the programmability of the bpf prog attached to a reuseport group (a group of sk serving the same IP:PORT). For example, in UDP, the bpf prog can peek into the payload (e.g. through the "data" pointer introduced in the later patch) to learn the application level's connection information and then decide which sk to pick from a bpf map. The userspace can tightly couple the sk's location in a bpf map with the application logic in generating the UDP payload's connection information. This connection info contact/API stays within the userspace. Also, when used with map-in-map, the userspace can switch the old-server-process's inner map to a new-server-process's inner map in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)". The bpf prog will then direct incoming requests to the new process instead of the old process. The old process can finish draining the pending requests (e.g. by "accept()") before closing the old-fds. [Note that deleting a fd from a bpf map does not necessary mean the fd is closed] During map_update_elem(), Only SO_REUSEPORT sk (i.e. which has already been added to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is "bind()" for UDP or "bind()+listen()" for TCP. These conditions are ensured in "reuseport_array_update_check()". A SO_REUSEPORT sk can only be added once to a map (i.e. the same sk cannot be added twice even to the same map). SO_REUSEPORT already allows another sk to be created for the same IP:PORT. There is no need to re-create a similar usage in the BPF side. When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"), it will notify the bpf map to remove it from the map also. It is done through "bpf_sk_reuseport_detach()" and it will only be called if >=1 of the "reuse->sock[]" has ever been added to a bpf map. The map_update()/map_delete() has to be in-sync with the "reuse->socks[]". Hence, the same "reuseport_lock" used by "reuse->socks[]" has to be used here also. Care has been taken to ensure the lock is only acquired when the adding sk passes some strict tests. and freeing the map does not require the reuseport_lock. The reuseport_array will also support lookup from the syscall side. It will return a sock_gen_cookie(). The sock_gen_cookie() is on-demand (i.e. a sk's cookie is not generated until the very first map_lookup_elem()). The lookup cookie is 64bits but it goes against the logical userspace expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also). It may catch user in surprise if we enforce value_size=8 while userspace still pass a 32bits fd during update. Supporting different value_size between lookup and update seems unintuitive also. We also need to consider what if other existing fd based maps want to return 64bits value from syscall's lookup in the future. Hence, reuseport_array supports both value_size 4 and 8, and assuming user will usually use value_size=4. The syscall's lookup will return ENOSPC on value_size=4. It will will only return 64bits value from sock_gen_cookie() when user consciously choose value_size=8 (as a signal that lookup is desired) which then requires a 64bits value in both lookup and update. Signed-off-by: Martin KaFai Lau Acked-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann

bpf: introduce cgroup storage maps

2018-08-02T22:47:32Z

This commit introduces BPF_MAP_TYPE_CGROUP_STORAGE maps: a special type of maps which are implementing the cgroup storage. >From the userspace point of view it's almost a generic hash map with the (cgroup inode id, attachment type) pair used as a key. The only difference is that some operations are restricted: 1) a user can't create new entries, 2) a user can't remove existing entries. The lookup from userspace is o(log(n)). Signed-off-by: Roman Gushchin Cc: Alexei Starovoitov Cc: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

bpf: add ability to charge bpf maps memory dynamically

2018-08-02T22:47:31Z

This commits extends existing bpf maps memory charging API to support dynamic charging/uncharging. This is required to account memory used by maps, if all entries are created dynamically after the map initialization. Signed-off-by: Roman Gushchin Cc: Alexei Starovoitov Cc: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

Merge tag 'v4.18-rc5' into locking/core, to pick up fixes

2018-07-17T07:27:43Z

Signed-off-by: Ingo Molnar

bpf: sockhash, disallow bpf_tcp_close and update in parallel

2018-07-07T22:19:30Z

After latest lock updates there is no longer anything preventing a close and recvmsg call running in parallel. Additionally, we can race update with close if we close a socket and simultaneously update if via the BPF userspace API (note the cgroup ops are already run with sock_lock held). To resolve this take sock_lock in close and update paths. Reported-by: syzbot+b680e42077a0d7c9a0c4@syzkaller.appspotmail.com Fixes: e9db4ef6bf4c ("bpf: sockhash fix omitted bucket lock in sock_close") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov

bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF

2018-06-26T09:28:38Z

If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not possible to attach, detach or query IR BPF programs to /dev/lircN devices, making them impossible to use. For embedded devices, it should be possible to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled. This change requires some refactoring, since bpf_prog_{attach,detach,query} functions are now always compiled, but their code paths for cgroups need moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c, moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not require #ifdefs since that is already conditionally compiled. Fixes: f4364dcfc86d ("media: rc: introduce BPF_PROG_LIRC_MODE2") Signed-off-by: Sean Young Signed-off-by: Daniel Borkmann

atomics/treewide: Rename __atomic_add_unless() => atomic_fetch_add_unless()

2018-06-21T12:22:32Z

While __atomic_add_unless() was originally intended as a building-block for atomic_add_unless(), it's now used in a number of places around the kernel. It's the only common atomic operation named __atomic*(), rather than atomic_*(), and for consistency it would be better named atomic_fetch_add_unless(). This lack of consistency is slightly confusing, and gets in the way of scripting atomics. Given that, let's clean things up and promote it to an official part of the atomics API, in the form of atomic_fetch_add_unless(). This patch converts definitions and invocations over to the new name, including the instrumented version, using the following script: ---- git grep -w __atomic_add_unless | while read line; do sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}"; done git grep -w __arch_atomic_add_unless | while read line; do sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}"; done ---- Note that we do not have atomic{64,_long}_fetch_add_unless(), which will be introduced by later patches. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Reviewed-by: Will Deacon Acked-by: Geert Uytterhoeven Acked-by: Peter Zijlstra (Intel) Acked-by: Palmer Dabbelt Cc: Boqun Feng Cc: Linus Torvalds Cc: Thomas Gleixner Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com Signed-off-by: Ingo Molnar