linux/kernel/cgroup, branch v5.6

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-03-12T23:19:19Z

Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...

cgroup: memcg: net: do not associate sock with unrelated cgroup

2020-03-10T22:33:05Z

We are testing network memory accounting in our setup and noticed inconsistent network memory usage and often unrelated cgroups network usage correlates with testing workload. On further inspection, it seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in irq context specially for cgroup v1. mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context and kind of assumes that this can only happen from sk_clone_lock() and the source sock object has already associated cgroup. However in cgroup v1, where network memory accounting is opt-in, the source sock can be unassociated with any cgroup and the new cloned sock can get associated with unrelated interrupted cgroup. Cgroup v2 can also suffer if the source sock object was created by process in the root cgroup or if sk_alloc() is called in irq context. The fix is to just do nothing in interrupt. WARNING: Please note that about half of the TCP sockets are allocated from the IRQ context, so, memory used by such sockets will not be accouted by the memcg. The stack trace of mem_cgroup_sk_alloc() from IRQ-context: CPU: 70 PID: 12720 Comm: ssh Tainted: 5.6.0-smp-DEV #1 Hardware name: ... Call Trace: dump_stack+0x57/0x75 mem_cgroup_sk_alloc+0xe9/0xf0 sk_clone_lock+0x2a7/0x420 inet_csk_clone_lock+0x1b/0x110 tcp_create_openreq_child+0x23/0x3b0 tcp_v6_syn_recv_sock+0x88/0x730 tcp_check_req+0x429/0x560 tcp_v6_rcv+0x72d/0xa40 ip6_protocol_deliver_rcu+0xc9/0x400 ip6_input+0x44/0xd0 ? ip6_protocol_deliver_rcu+0x400/0x400 ip6_rcv_finish+0x71/0x80 ipv6_rcv+0x5b/0xe0 ? ip6_sublist_rcv+0x2e0/0x2e0 process_backlog+0x108/0x1e0 net_rx_action+0x26b/0x460 __do_softirq+0x104/0x2a6 do_softirq_own_stack+0x2a/0x40 do_softirq.part.19+0x40/0x50 __local_bh_enable_ip+0x51/0x60 ip6_finish_output2+0x23d/0x520 ? ip6table_mangle_hook+0x55/0x160 __ip6_finish_output+0xa1/0x100 ip6_finish_output+0x30/0xd0 ip6_output+0x73/0x120 ? __ip6_finish_output+0x100/0x100 ip6_xmit+0x2e3/0x600 ? ipv6_anycast_cleanup+0x50/0x50 ? inet6_csk_route_socket+0x136/0x1e0 ? skb_free_head+0x1e/0x30 inet6_csk_xmit+0x95/0xf0 __tcp_transmit_skb+0x5b4/0xb20 __tcp_send_ack.part.60+0xa3/0x110 tcp_send_ack+0x1d/0x20 tcp_rcv_state_process+0xe64/0xe80 ? tcp_v6_connect+0x5d1/0x5f0 tcp_v6_do_rcv+0x1b1/0x3f0 ? tcp_v6_do_rcv+0x1b1/0x3f0 __release_sock+0x7f/0xd0 release_sock+0x30/0xa0 __inet_stream_connect+0x1c3/0x3b0 ? prepare_to_wait+0xb0/0xb0 inet_stream_connect+0x3b/0x60 __sys_connect+0x101/0x120 ? __sys_getsockopt+0x11b/0x140 __x64_sys_connect+0x1a/0x20 do_syscall_64+0x51/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The stack trace of mem_cgroup_sk_alloc() from IRQ-context: Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking") Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by: Shakeel Butt Reviewed-by: Roman Gushchin Signed-off-by: David S. Miller

cgroup1: don't call release_agent when it is ""

2020-03-04T16:53:33Z

Older (and maybe current) versions of systemd set release_agent to "" when shutting down, but do not set notify_on_release to 0. Since 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()"), we filter out such calls when the user mode helper path is "". However, when used in conjunction with an actual (i.e. non "") STATIC_USERMODEHELPER, the path is never "", so the real usermode helper will be called with argv[0] == "". Let's avoid this by not invoking the release_agent when it is "". Signed-off-by: Tycho Andersen Signed-off-by: Tejun Heo

cgroup: fix psi_show() crash on 32bit ino archs

2020-03-04T16:15:58Z

Similar to the commit d7495343228f ("cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()"), cgroup_id(root_cgrp) does not equal to 1 on 32bit ino archs which triggers all sorts of issues with psi_show() on s390x. For example, BUG: KASAN: slab-out-of-bounds in collect_percpu_times+0x2d0/ Read of size 4 at addr 000000001e0ce000 by task read_all/3667 collect_percpu_times+0x2d0/0x798 psi_show+0x7c/0x2a8 seq_read+0x2ac/0x830 vfs_read+0x92/0x150 ksys_read+0xe2/0x188 system_call+0xd8/0x2b4 Fix it by using cgroup_ino(). Fixes: 743210386c03 ("cgroup: use cgrp->kn->id as the cgroup ID") Signed-off-by: Qian Cai Acked-by: Johannes Weiner Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org # v5.5

cgroup: Iterate tasks that did not finish do_exit()

2020-02-12T22:02:53Z

PF_EXITING is set earlier than actual removal from css_set when a task is exitting. This can confuse cgroup.procs readers who see no PF_EXITING tasks, however, rmdir is checking against css_set membership so it can transitionally fail with EBUSY. Fix this by listing tasks that weren't unlinked from css_set active lists. It may happen that other users of the task iterator (without CSS_TASK_ITER_PROCS) spot a PF_EXITING task before cgroup_exit(). This is equal to the state before commit c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") but it may be reviewed later. Reported-by: Suren Baghdasaryan Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations") Signed-off-by: Michal Koutný Signed-off-by: Tejun Heo

cgroup: cgroup_procs_next should increase position index

2020-02-12T22:00:04Z

If seq_file .next fuction does not change position index, read after some lseek can generate unexpected output: 1) dd bs=1 skip output of each 2nd elements $ dd if=/sys/fs/cgroup/cgroup.procs bs=8 count=1 2 3 4 5 1+0 records in 1+0 records out 8 bytes copied, 0,000267297 s, 29,9 kB/s [test@localhost ~]$ dd if=/sys/fs/cgroup/cgroup.procs bs=1 count=8 2 4 <<< NB! 3 was skipped 6 <<< ... and 5 too 8 <<< ... and 7 8+0 records in 8+0 records out 8 bytes copied, 5,2123e-05 s, 153 kB/s This happen because __cgroup_procs_start() makes an extra extra cgroup_procs_next() call 2) read after lseek beyond end of file generates whole last line. 3) read after lseek into middle of last line generates expected rest of last line and unexpected whole line once again. Additionally patch removes an extra position index changes in __cgroup_procs_start() Cc: stable@vger.kernel.org https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin Signed-off-by: Tejun Heo

cgroup-v1: cgroup_pidlist_next should update position index

2020-02-12T21:53:35Z

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. # mount | grep cgroup # dd if=/mnt/cgroup.procs bs=1 # normal output ... 1294 1295 1296 1304 1382 584+0 records in 584+0 records out 584 bytes copied dd: /mnt/cgroup.procs: cannot skip to specified offset 83 <<< generates end of last line 1383 <<< ... and whole last line once again 0+1 records in 0+1 records out 8 bytes copied dd: /mnt/cgroup.procs: cannot skip to specified offset 1386 <<< generates last line anyway 0+1 records in 0+1 records out 5 bytes copied https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin Signed-off-by: Tejun Heo

Merge branch 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2020-02-11T01:07:05Z

Pull cgroup fix from Tejun Heo: "I made a mistake while removing cgroup task list lazy init optimization making the root cgroup.procs show entries for the init_tasks. The zero entries doesn't cause critical failures but does make systemd print out warning messages during boot. Fix it by omitting init_tasks as they should be" * 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: init_tasks shouldn't be linked to the root cgroup

Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-02-08T21:26:41Z

Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ...

cgroup1: switch to use of errorfc() et.al.

2020-02-07T19:48:43Z

Signed-off-by: Al Viro