linux/kernel/dma, branch v5.5

lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addr

2019-12-05T03:44:13Z

Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie Reviewed-by: Andrew Morton Cc: Russell King Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: Christoph Hellwig Cc: Marek Szyprowski Cc: Robin Murphy Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping

2019-11-28T19:16:43Z

Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...

Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

2019-11-26T03:40:40Z

Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...

dma-mapping: treat dev->bus_dma_mask as a DMA limit

2019-11-21T17:14:35Z

Using a mask to represent bus DMA constraints has a set of limitations. The biggest one being it can only hold a power of two (minus one). The DMA mapping code is already aware of this and treats dev->bus_dma_mask as a limit. This quirk is already used by some architectures although still rare. With the introduction of the Raspberry Pi 4 we've found a new contender for the use of bus DMA limits, as its PCIe bus can only address the lower 3GB of memory (of a total of 4GB). This is impossible to represent with a mask. To make things worse the device-tree code rounds non power of two bus DMA limits to the next power of two, which is unacceptable in this case. In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all over the tree and treat it as such. Note that dev->bus_dma_limit should contain the higher accessible DMA address. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Robin Murphy Signed-off-by: Christoph Hellwig

Merge branch 'for-next/zone-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into dma-mapping-for-next

2019-11-21T17:13:03Z

Pull in a stable branch from the arm64 tree that adds the zone_dma_bits variable to avoid creating hard to resolve conflicts with that addition.

dma-direct: exclude dma_direct_map_resource from the min_low_pfn check

2019-11-20T19:31:41Z

The valid memory address check in dma_capable only makes sense when mapping normal memory, not when using dma_map_resource to map a device resource. Add a new boolean argument to dma_capable to exclude that check for the dma_map_resource case. Fixes: b12d66278dd6 ("dma-direct: check for overflows on 32 bit DMA addresses") Reported-by: Marek Szyprowski Signed-off-by: Christoph Hellwig Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski

dma-direct: don't check swiotlb=force in dma_direct_map_resource

2019-11-20T19:31:41Z

When mapping resources we can't just use swiotlb ram for bounce buffering. Switch to a direct dma_capable check instead. Fixes: cfced786969c ("dma-mapping: remove the default map_resource implementation") Reported-by: Robin Murphy Signed-off-by: Christoph Hellwig Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski

dma-debug: clean up put_hash_bucket()

2019-11-20T19:31:41Z

The put_hash_bucket() is a bit cleaner if it takes an unsigned long directly instead of a pointer to unsigned long. Signed-off-by: Dan Carpenter Signed-off-by: Christoph Hellwig

dma-mapping: drop the dev argument to arch_sync_dma_for_*

2019-11-20T19:31:38Z

These are pure cache maintainance routines, so drop the unused struct device argument. Signed-off-by: Christoph Hellwig Suggested-by: Daniel Vetter

dma-debug: increase HASH_SIZE

2019-11-11T09:52:18Z

With modern NIC, it is not unusual having about ~256,000 active dma mappings and a hash size of 1024 buckets is too small. Forcing full cache line per bucket does not seem useful, especially now that we have contention on free_entries_lock for allocations and freeing of entries. Better use the space to fit more buckets. Signed-off-by: Eric Dumazet Signed-off-by: Christoph Hellwig