linux/kernel/dma, branch v5.6

dma-direct: improve DMA mask overflow reporting

2020-02-05T17:53:41Z

Remove the unset dma_mask case as that won't get into mapping calls anymore, and also report the other errors unconditonally and with a slightly improved message. Remove the now pointless report_addr helper. Signed-off-by: Christoph Hellwig Reviewed-by: Konrad Rzeszutek Wilk

dma-direct: improve swiotlb error reporting

2020-02-05T17:53:05Z

Untangle the way how dma_direct_map_page calls into swiotlb to be able to properly report errors where the swiotlb DMA address overflows the mask separately from overflows in the !swiotlb case. This means that siotlb_map now has to do a little more work that duplicates dma_direct_map_page, but doing so greatly simplifies the calling convention. Signed-off-by: Christoph Hellwig Reviewed-by: Konrad Rzeszutek Wilk

dma-direct: relax addressability checks in dma_direct_supported

2020-02-05T17:50:55Z

dma_direct_supported tries to find the minimum addressable bitmask based on the end pfn and optional magic that architectures can use to communicate the size of the magic ZONE_DMA that can be used for bounce buffering. But between the DMA offsets that can change per device (or sometimes even region), the fact the ZONE_DMA isn't even guaranteed to be the lowest addresses and failure of having proper interfaces to the MM code this fails at least for one arm subarchitecture. As all the legacy DMA implementations have supported 32-bit DMA masks, and 32-bit masks are guranteed to always work by the API contract (using bounce buffers if needed), we can short cut the complicated check and always return true without breaking existing assumptions. Hopefully we can properly clean up the interaction with the arch defined zones and the bootmem allocator eventually. Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs") Reported-by: Peter Ujfalusi Signed-off-by: Christoph Hellwig Tested-by: Peter Ujfalusi

dma-contiguous: CMA: give precedence to cmdline

2020-01-30T13:41:42Z

Although the device tree might contain a reserved-memory DT node dedicated as the default CMA pool, users might want to change CMA's parameters using the kernel command line for debugging purposes and whatnot. Honor this by bypassing the reserved memory CMA setup, which will ultimately end up freeing the memblock and allow the command line CMA configuration routine to run. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Phil Elwell Signed-off-by: Christoph Hellwig

lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addr

2019-12-05T03:44:13Z

Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie Reviewed-by: Andrew Morton Cc: Russell King Cc: Arnd Bergmann Cc: Greg Kroah-Hartman Cc: Christoph Hellwig Cc: Marek Szyprowski Cc: Robin Murphy Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping

2019-11-28T19:16:43Z

Pull dma-mapping updates from Christoph Hellwig: - improve dma-debug scalability (Eric Dumazet) - tiny dma-debug cleanup (Dan Carpenter) - check for vmap memory in dma_map_single (Kees Cook) - check for dma_addr_t overflows in dma-direct when using DMA offsets (Nicolas Saenz Julienne) - switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas Saenz Julienne) - fix arm-nommu dma-ranges handling (Vladimir Murzin) - use __initdata in CMA (Shyam Saini) - replace the bus dma mask with a limit (Nicolas Saenz Julienne) - merge the remapping helpers into the main dma-direct flow (me) - switch xtensa to the generic dma remap handling (me) - various cleanups around dma_capable (me) - remove unused dev arguments to various dma-noncoherent helpers (me) * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: * tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits) dma-mapping: treat dev->bus_dma_mask as a DMA limit dma-direct: exclude dma_direct_map_resource from the min_low_pfn check dma-direct: don't check swiotlb=force in dma_direct_map_resource dma-debug: clean up put_hash_bucket() powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys dma-direct: avoid a forward declaration for phys_to_dma dma-direct: unify the dma_capable definitions dma-mapping: drop the dev argument to arch_sync_dma_for_* x86/PCI: sta2x11: use default DMA address translation dma-direct: check for overflows on 32 bit DMA addresses dma-debug: increase HASH_SIZE dma-debug: reorder struct dma_debug_entry fields xtensa: use the generic uncached segment support dma-mapping: merge the generic remapping helpers into dma-direct dma-direct: provide mmap and get_sgtable method overrides dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages dma-direct: remove __dma_direct_free_pages usb: core: Remove redundant vmap checks kernel: dma-contiguous: mark CMA parameters __initdata/__initconst dma-debug: add a schedule point in debug_dma_dump_mappings() ...

Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

2019-11-26T03:40:40Z

Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...

dma-mapping: treat dev->bus_dma_mask as a DMA limit

2019-11-21T17:14:35Z

Using a mask to represent bus DMA constraints has a set of limitations. The biggest one being it can only hold a power of two (minus one). The DMA mapping code is already aware of this and treats dev->bus_dma_mask as a limit. This quirk is already used by some architectures although still rare. With the introduction of the Raspberry Pi 4 we've found a new contender for the use of bus DMA limits, as its PCIe bus can only address the lower 3GB of memory (of a total of 4GB). This is impossible to represent with a mask. To make things worse the device-tree code rounds non power of two bus DMA limits to the next power of two, which is unacceptable in this case. In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all over the tree and treat it as such. Note that dev->bus_dma_limit should contain the higher accessible DMA address. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Robin Murphy Signed-off-by: Christoph Hellwig

Merge branch 'for-next/zone-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into dma-mapping-for-next

2019-11-21T17:13:03Z

Pull in a stable branch from the arm64 tree that adds the zone_dma_bits variable to avoid creating hard to resolve conflicts with that addition.

dma-direct: exclude dma_direct_map_resource from the min_low_pfn check

2019-11-20T19:31:41Z

The valid memory address check in dma_capable only makes sense when mapping normal memory, not when using dma_map_resource to map a device resource. Add a new boolean argument to dma_capable to exclude that check for the dma_map_resource case. Fixes: b12d66278dd6 ("dma-direct: check for overflows on 32 bit DMA addresses") Reported-by: Marek Szyprowski Signed-off-by: Christoph Hellwig Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski