linux/kernel/dma, branch v5.8

dma-pool: do not allocate pool memory from CMA

2020-07-14T13:46:32Z

There is no guarantee to CMA's placement, so allocating a zone specific atomic pool from CMA might return memory from a completely different memory zone. So stop using it. Fixes: c84dc6e68a1d ("dma-pool: add additional coherent pools to map to gfp mask") Reported-by: Jeremy Linton Signed-off-by: Nicolas Saenz Julienne Tested-by: Jeremy Linton Acked-by: David Rientjes Signed-off-by: Christoph Hellwig

dma-pool: make sure atomic pool suits device

2020-07-14T13:42:33Z

When allocating DMA memory from a pool, the core can only guess which atomic pool will fit a device's constraints. If it doesn't, get a safer atomic pool and try again. Fixes: c84dc6e68a1d ("dma-pool: add additional coherent pools to map to gfp mask") Reported-by: Jeremy Linton Suggested-by: Robin Murphy Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig

dma-pool: introduce dma_guess_pool()

2020-07-14T13:42:30Z

dma-pool's dev_to_pool() creates the false impression that there is a way to grantee a mapping between a device's DMA constraints and an atomic pool. It tuns out it's just a guess, and the device might need to use an atomic pool containing memory from a 'safer' (or lower) memory zone. To help mitigate this, introduce dma_guess_pool() which can be fed a device's DMA constraints and atomic pools already known to be faulty, in order for it to provide an better guess on which pool to use. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig

dma-pool: get rid of dma_in_atomic_pool()

2020-07-14T13:42:27Z

The function is only used once and can be simplified to a one-liner. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig

dma-direct: provide function to check physical memory area validity

2020-07-14T13:42:24Z

dma_coherent_ok() checks if a physical memory area fits a device's DMA constraints. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Christoph Hellwig

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-07-11T01:16:22Z

Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2020-06-30T21:20:45Z

Daniel Borkmann says: ==================== pull-request: bpf 2020-06-30 The following pull-request contains BPF updates for your *net* tree. We've added 28 non-merge commits during the last 9 day(s) which contain a total of 35 files changed, 486 insertions(+), 232 deletions(-). The main changes are: 1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer types, from Yonghong Song. 2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki. 3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb internals and integrate it properly into DMA core, from Christoph Hellwig. 4) Fix RCU splat from recent changes to avoid skipping ingress policy when kTLS is enabled, from John Fastabend. 5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its position masking to work, from Andrii Nakryiko. 6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading of network programs, from Maciej Żenczykowski. 7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer. 8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet. ==================== Signed-off-by: David S. Miller

dma-mapping: Add a new dma_need_sync API

2020-06-30T13:44:03Z

Add a new API to check if calls to dma_sync_single_for_{device,cpu} are required for a given DMA streaming mapping. Signed-off-by: Christoph Hellwig Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200629130359.2690853-2-hch@lst.de

dma-mapping: warn when coherent pool is depleted

2020-06-29T08:05:21Z

When a DMA coherent pool is depleted, allocation failures may or may not get reported in the kernel log depending on the allocator. The admin does have a workaround, however, by using coherent_pool= on the kernel command line. Provide some guidance on the failure and a recommended minimum size for the pools (double the size). Signed-off-by: David Rientjes Tested-by: Guenter Roeck Signed-off-by: Christoph Hellwig

dma-remap: align the size in dma_common_*_remap()

2020-06-23T12:14:41Z

Running a guest with a virtio-iommu protecting virtio devices is broken since commit 515e5b6d90d4 ("dma-mapping: use vmap insted of reimplementing it"). Before the conversion, the size was page aligned in __get_vm_area_node(). Doing so fixes the regression. Fixes: 515e5b6d90d4 ("dma-mapping: use vmap insted of reimplementing it") Signed-off-by: Eric Auger Signed-off-by: Christoph Hellwig