linux/kernel/irq, branch v3.7

irqdomain: augment add_simple() to allocate descs

2012-10-10T06:57:26Z

Currently we rely on all IRQ chip instances to dynamically allocate their IRQ descriptors unless they use the linear IRQ domain. So for irqdomain_add_legacy() and irqdomain_add_simple() the caller need to make sure that descriptors are allocated. Let's slightly augment the yet unused irqdomain_add_simple() to also allocate descriptors as a means to simplify usage and avoid code duplication throughout the kernel. We warn if descriptors cannot be allocated, e.g. if a platform has the bad habit of hogging descriptors at boot time. Cc: Thomas Gleixner Cc: Grant Likely Cc: Paul Mundt Cc: Russell King Cc: Lee Jones Reviewed-by: Rob Herring Signed-off-by: Linus Walleij

genirq: Export dummy_irq_chip

2012-08-21T14:14:23Z

Export dummy_irq_chip to modules to allow them to do things such as irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_level_irq); This fixes ERROR: "dummy_irq_chip" [drivers/gpio/gpio-pcf857x.ko] undefined! when gpio-pcf857x.c is being built as a module. Signed-off-by: Kuninori Morimoto Cc: Linus Walleij Cc: Stephen Rothwell Cc: Greg KH Link: http://lkml.kernel.org/r/871ujstrp6.wl%25kuninori.morimoto.gx@renesas.com Signed-off-by: Thomas Gleixner

genirq: Export irq_set_chip_and_handler_name()

2012-08-21T14:14:23Z

Export irq_set_chip_and_handler_name() to modules to allow them to do things such as irq_set_chip_and_handler(....); This fixes ERROR: "irq_set_chip_and_handler_name" \ [drivers/gpio/gpio-pcf857x.ko] undefined! when gpio-pcf857x.c is being built as a module. Signed-off-by: Kuninori Morimoto Cc: Linus Walleij Cc: Stephen Rothwell Cc: Greg KH Link: http://lkml.kernel.org/r/873948trpk.wl%25kuninori.morimoto.gx@renesas.com Signed-off-by: Thomas Gleixner

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-08-03T17:56:44Z

Pull irq fix from Ingo Molnar. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Allow irq chips to mark themself oneshot safe

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6

2012-08-01T03:44:03Z

Pull irqdomain changes from Grant Likely: "Round of refactoring and enhancements to irq_domain infrastructure. This series starts the process of simplifying irqdomain. The ultimate goal is to merge LEGACY, LINEAR and TREE mappings into a single system, but had to back off from that after some last minute bugs. Instead it mainly reorganizes the code and ensures that the reverse map gets populated when the irq is mapped instead of the first time it is looked up. Merging of the irq_domain types is deferred to v3.7 In other news, this series adds helpers for creating static mappings on a linear or tree mapping." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: irqdomain: Improve diagnostics when a domain mapping fails irqdomain: eliminate slow-path revmap lookups irqdomain: Fix irq_create_direct_mapping() to test irq_domain type. irqdomain: Eliminate dedicated radix lookup functions irqdomain: Support for static IRQ mapping and association. irqdomain: Always update revmap when setting up a virq irqdomain: Split disassociating code into separate function irq_domain: correct a minor wrong comment for linear revmap irq_domain: Standardise legacy/linear domain selection irqdomain: Make ops->map hook optional irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY irqdomain: Simple NUMA awareness. devicetree: add helper inline for retrieving a node's full name

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

2012-08-01T02:07:42Z

Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...

genirq: Allow irq chips to mark themself oneshot safe

2012-07-25T10:46:38Z

Some interrupt chips like MSI are oneshot safe by implementation. For those interrupts we can avoid the mask/unmask sequence for threaded interrupt handlers. Signed-off-by: Thomas Gleixner Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1207132056540.32033@ionos Cc: Linus Torvalds Cc: Avi Kivity Cc: Marcelo Tosatti Cc: Jan Kiszka

irqdomain: Improve diagnostics when a domain mapping fails

2012-07-25T04:37:30Z

When the map operation fails log the error code we get and add a WARN_ON() so we get a backtrace (which should help work out which interrupt is the source of the issue). Signed-off-by: Mark Brown Signed-off-by: Grant Likely

irqdomain: eliminate slow-path revmap lookups

2012-07-25T04:37:23Z

With the current state of irq_domain, the reverse map is always updated when new IRQs get mapped. This means that the irq_find_mapping() function can be simplified to execute the revmap lookup functions unconditionally This patch adds lookup functions for the revmaps that don't yet have one and removes the slow path lookup code path. v8: Broke out unrelated changes into separate patches. Rebased on Paul's irq association patches. v7: Rebased to irqdomain/next for v3.4 and applied before the removal of 'hint' v6: Remove the slow path entirely. The only place where the slow path could get called is for a linear mapping if the hwirq number is larger than the linear revmap size. There shouldn't be any interrupt controllers that do that. v5: rewrite to not use a ->revmap() callback. It is simpler, smaller, safer and faster to open code each of the revmap lookups directly into irq_find_mapping() via a switch statement. v4: Fix build failure on incorrect variable reference. Signed-off-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Thomas Gleixner Cc: Milton Miller Cc: Paul Mundt Cc: Rob Herring

Merge remote-tracking branch 'origin' into irqdomain/next

2012-07-25T04:34:40Z