linux/kernel/irq, branch v4.9

genirq: Use irq type from irqdata instead of irqdesc

2016-11-08T14:15:19Z

The type flags in the irq descriptor are there for historical reasons and only updated via irq_modify_status() or irq_set_type(). Both functions also update the type flags in irqdata. __setup_irq() is the only left over user of the type flags in the irq descriptor. If __setup_irq() is called with empty irq type flags, then the type flags are retrieved from irqdata. If an interrupt is shared, then the type flags are compared with the type flags stored in the irq descriptor. On x86 the ioapic does not have a irq_set_type() callback because the type is defined in the BIOS tables and cannot be changed. The type is stored in irqdata at setup time without updating the type data in the irq descriptor. As a result the comparison described above fails. There is no point in updating the irq descriptor flags because the only relevant storage is irqdata. Use the type flags from irqdata for both retrieval and comparison in __setup_irq() instead. Aside of that the print out in case of non matching type flags has the old and new type flags arguments flipped. Fix that as well. For correctness sake the flags stored in the irq descriptor should be removed, but this is beyond the scope of this bugfix and will be done in a later patch. Fixes: 4b357daed698 ("genirq: Look-up trigger type if not specified by caller") Reported-and-tested-by: Mika Westerberg Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Jon Hunter Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos Signed-off-by: Thomas Gleixner

kernel/irq: Export irq_set_parent()

2016-10-21T08:21:38Z

The TPS65217 driver grew interrupt support which uses irq_set_parent(). While it's not yet clear why this is used in the first place, building the driver as a module fails with: ERROR: ".irq_set_parent" [drivers/mfd/tps65217.ko] undefined! The correctness of the driver change is still investigated, but for now it's less trouble to export irq_set_parent() than dealing with the build wreckage. [ tglx: Rewrote changelog and made the export GPL ] Fixes: 6556bdacf646 ("mfd: tps65217: Add support for IRQs") Signed-off-by: Sudip Mukherjee Cc: Sudip Mukherjee Cc: Marcin Niestroj Cc: Grygorii Strashko Cc: Tony Lindgren Cc: Lee Jones Link: http://lkml.kernel.org/r/1475775403-27207-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Thomas Gleixner

genirq: Make function __irq_do_set_handler() static

2016-09-25T20:46:52Z

Fixes the following sparse warning: kernel/irq/chip.c:786:1: warning: symbol '__irq_do_set_handler' was not declared. Should it be static? Signed-off-by: Wei Yongjun Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com Signed-off-by: Thomas Gleixner

Merge branch 'irq/urgent' into irq/core

2016-09-20T21:20:32Z

Merge urgent fixes so pending patches for 4.9 can be applied.

genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE

2016-09-19T09:31:36Z

There is no point in trying to configure the trigger of a chained interrupt if no trigger information has been configured. At best this is ignored, and at the worse this confuses the underlying irqchip (which is likely not to handle such a thing), and unnecessarily alarms the user. Only apply the configuration if type is not IRQ_TYPE_NONE. Fixes: 1e12c4a9393b ("genirq: Correctly configure the trigger on chained interrupts") Reported-and-tested-by: Geert Uytterhoeven Signed-off-by: Marc Zyngier Link: https://lkml.kernel.org/r/CAMuHMdVW1eTn20=EtYcJ8hkVwohaSuH_yQXrY2MGBEvZ8fpFOg@mail.gmail.com Link: http://lkml.kernel.org/r/1474274967-15984-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

Merge branch 'irq/for-block' into irq/core

2016-09-15T18:54:40Z

Add the new irq spreading infrastructure.

genirq/affinity: Remove old irq spread infrastructure

2016-09-14T20:11:09Z

No more users. Signed-off-by: Thomas Gleixner Cc: Christoph Hellwig Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-5-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner

genirq/msi: Switch to new irq spreading infrastructure

2016-09-14T20:11:09Z

Switch MSI over to the new spreading code. If a pci device contains a valid pointer to a cpumask, then this mask is used for spreading otherwise the online cpu mask is used. This allows a driver to restrict the spread to a subset of CPUs, e.g. cpus on a particular node. Signed-off-by: Thomas Gleixner Cc: Christoph Hellwig Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner

genirq/affinity: Provide smarter irq spreading infrastructure

2016-09-14T20:11:08Z

The current irq spreading infrastructure is just looking at a cpumask and tries to spread the interrupts over the mask. Thats suboptimal as it does not take numa nodes into account. Change the logic so the interrupts are spread across numa nodes and inside the nodes. If there are more cpus than vectors per node, then we set the affinity to several cpus. If HT siblings are available we take that into account and try to set all siblings to a single vector. Signed-off-by: Thomas Gleixner Cc: Christoph Hellwig Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Link: http://lkml.kernel.org/r/1473862739-15032-3-git-send-email-hch@lst.de

genirq/msi: Add cpumask allocation to alloc_msi_entry

2016-09-14T20:11:08Z

For irq spreading want to store affinity masks in the msi_entry. Add the infrastructure for it. We allocate an array of cpumasks with an array size of the number of used vectors in the entry, so we can hand in the information per linux interrupt later. As we hand in the number of used vectors, we assign them right away. Convert all the call sites. Signed-off-by: Thomas Gleixner Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig Link: http://lkml.kernel.org/r/1473862739-15032-2-git-send-email-hch@lst.de