linux/kernel/irq, branch v6.14

genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS

2025-02-13T12:18:54Z

CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS is not used anymore, hence remove it. Fixes: f94a18249b7f ("genirq: Remove IRQ_MOVE_PCNTXT and related code") Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20250209041655.331470-7-apatel@ventanamicro.com

Merge tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-01-21T21:51:07Z

Pull interrupt subsystem updates from Thomas Gleixner: - Consolidate the machine_kexec_mask_interrupts() by providing a generic implementation and replacing the copy & pasta orgy in the relevant architectures. - Prevent unconditional operations on interrupt chips during kexec shutdown, which can trigger warnings in certain cases when the underlying interrupt has been shut down before. - Make the enforcement of interrupt handling in interrupt context unconditionally available, so that it actually works for non x86 related interrupt chips. The earlier enablement for ARM GIC chips set the required chip flag, but did not notice that the check was hidden behind a config switch which is not selected by ARM[64]. - Decrapify the handling of deferred interrupt affinity setting. Some interrupt chips require that affinity changes are made from the context of handling an interrupt to avoid certain race conditions. For x86 this was the default, but with interrupt remapping this requirement was lifted and a flag was introduced which tells the core code that affinity changes can be done in any context. Unrestricted affinity changes are the default for the majority of interrupt chips. RISCV has the requirement to add the deferred mode to one of it's interrupt controllers, but with the original implementation this would require to add the any context flag to all other RISC-V interrupt chips. That's backwards, so reverse the logic and require that chips, which need the deferred mode have to be marked accordingly. That avoids chasing the 'sane' chips and marking them. - Add multi-node support to the Loongarch AVEC interrupt controller driver. - The usual tiny cleanups, fixes and improvements all over the place. * tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set() genirq/timings: Add kernel-doc for a function parameter genirq: Remove IRQ_MOVE_PCNTXT and related code x86/apic: Convert to IRQCHIP_MOVE_DEFERRED genirq: Provide IRQCHIP_MOVE_DEFERRED hexagon: Remove GENERIC_PENDING_IRQ leftover ARC: Remove GENERIC_PENDING_IRQ genirq: Remove handle_enforce_irqctx() wrapper genirq: Make handle_enforce_irqctx() unconditionally available irqchip/loongarch-avec: Add multi-nodes topology support irqchip/ts4800: Replace seq_printf() by seq_puts() irqchip/ti-sci-inta : Add module build support irqchip/ti-sci-intr: Add module build support irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown kexec: Consolidate machine_kexec_mask_interrupts() implementation genirq: Reuse irq_thread_fn() for forced thread case genirq: Move irq_thread_fn() further up in the code

genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()

2025-01-16T08:10:17Z

The recent conversion of brcmstb_l2_mask_and_ack() to irq_gc_mask_disable_and_ack_set() missed that the driver can be built as a module, but the generic function is not exported. Add the missing export. [ tglx: Converted it to a fix ] Fixes: dd1f17a9faf5 ("irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function") Signed-off-by: Dr. David Alan Gilbert Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20250116005920.626822-1-linux@treblig.org

genirq/timings: Add kernel-doc for a function parameter

2025-01-15T20:38:53Z

Add the description for @now to eliminate a kernel-doc warning. timings.c:537: warning: Function parameter or struct member 'now' not described in 'irq_timings_next_event' Signed-off-by: Randy Dunlap Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20250111062954.910657-1-rdunlap@infradead.org

genirq: Remove IRQ_MOVE_PCNTXT and related code

2025-01-15T20:38:53Z

Now that x86 is converted over to use the IRQCHIP_MOVE_DEFERRED flags, remove IRQ*_MOVE_PCNTXT and related code. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241210103335.626707225@linutronix.de

genirq: Provide IRQCHIP_MOVE_DEFERRED

2025-01-15T09:56:22Z

The logic of GENERIC_PENDING_IRQ is backwards for historical reasons. Most interrupt controllers allow to move the interrupt from arbitrary contexts. If GENERIC_PENDING_IRQ is enabled by an architecture to support a chip, which requires the affinity change to happen in interrupt context, all other chips have to be marked with IRQF_MOVE_PCNTXT. That's tedious and there is no real good reason for the extra flags in the irq descriptor and the irq data status fields. In fact the decision whether interrupts can be moved in arbitrary context or not is a property of the interrupt chip. To simplify adoption for RISC-V provide a new mechanism which is enabled via a config switch and allows to add a flag to irq_chip::flags to request that interrupt affinity changes are deferred. Setting the top level chip of an interrupt evaluates the flag and maps it into the existing logic. The config switch and the various PCNTXT flags are temporary until x86 is converted over to this scheme. This intermediate step also allows trivial backporting of the mechanism to plug the affinity change race of various RISC-V interrupt controllers. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241210103335.500314436@linutronix.de

genirq: Remove handle_enforce_irqctx() wrapper

2025-01-15T09:56:22Z

Now that it is unconditionally available, remove the wrapper. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241210101811.561078243@linutronix.de

genirq: Make handle_enforce_irqctx() unconditionally available

2025-01-15T09:56:21Z

Commit 1b57d91b969c ("irqchip/gic-v2, v3: Prevent SW resends entirely") sett the flag which enforces interrupt handling in interrupt context and prevents software base resends for ARM GIC v2/v3. But it missed that the helper function which checks the flag was hidden behind CONFIG_GENERIC_PENDING_IRQ, which is not set by ARM[64]. Make the helper unconditionally available so that the enforcement actually works. Fixes: 1b57d91b969c ("irqchip/gic-v2, v3: Prevent SW resends entirely") Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241210101811.497716609@linutronix.de

genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown

2024-12-11T19:32:34Z

During machine kexec, machine_kexec_mask_interrupts() is responsible for disabling or masking all interrupts. While the irq_disable() is only invoked when the interrupt is not yet disabled, it unconditionally invokes the irq_mask() callback for every interrupt descriptor, even when the interrupt is already masked or not even started up yet. A specific issue was observed in the crash kernel flow after unbinding a device (prior to kexec) that used a GPIO as an IRQ source. The warning was triggered by the gpiochip_disable_irq() function, which attempts to clear the FLAG_IRQ_IS_ENABLED flag when FLAG_USED_AS_IRQ was not set. This issue surfaced after commit a8173820f441 ("gpio: gpiolib: Allow GPIO IRQs to lazy disable") introduced lazy disablement for GPIO IRQs. It replaced disable/enable hooks with mask/unmask hooks. Unlike the disable hook, the mask hook doesn't handle already-masked IRQs. When a GPIO-IRQ driver is unbound, the IRQ is released, triggering __irq_disable() and irq_state_set_masked(). A subsequent call to machine_kexec_mask_interrupts() re-invokes chip->irq_mask(). This results in a call chain, including gpiochip_irq_mask() and gpiochip_disable_irq(). Since FLAG_USED_AS_IRQ was cleared earlier, the warning is triggered. Replace the direct invocation of the irq_mask() and irq_disable() callbacks invoking to irq_shutdown(), which handles the cases correct and avoid it all together when the interrupt has never been started up. Signed-off-by: Eliav Farber Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241204142003.32859-3-farbere@amazon.com

kexec: Consolidate machine_kexec_mask_interrupts() implementation

2024-12-11T19:32:34Z

Consolidate the machine_kexec_mask_interrupts implementation into a common function located in a new file: kernel/irq/kexec.c. This removes duplicate implementations from architecture-specific files in arch/arm, arch/arm64, arch/powerpc, and arch/riscv, reducing code duplication and improving maintainability. The new implementation retains architecture-specific behavior for CONFIG_GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD, which was previously implemented for ARM64. When enabled (currently for ARM64), it clears the active state of interrupts forwarded to virtual machines (VMs) before handling other interrupt masking operations. Signed-off-by: Eliav Farber Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241204142003.32859-2-farbere@amazon.com