linux/kernel/jump_label.c, branch v4.14

jump_label: Provide hotplug context variants

2017-08-10T10:28:59Z

As using the normal static key API under the hotplug lock is pretty much impossible, let's provide a variant of some of them that require the hotplug lock to have already been taken. These function are only meant to be used in CPU hotplug callbacks. Signed-off-by: Marc Zyngier Signed-off-by: Peter Zijlstra (Intel) Cc: Leo Yan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-4-marc.zyngier@arm.com Signed-off-by: Ingo Molnar

jump_label: Split out code under the hotplug lock

2017-08-10T10:28:58Z

In order to later introduce an "already locked" version of some of the static key funcions, let's split the code into the core stuff (the *_cpuslocked functions) and the usual helpers, which now take/release the hotplug lock and call into the _cpuslocked versions. Signed-off-by: Marc Zyngier Signed-off-by: Peter Zijlstra (Intel) Cc: Leo Yan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-3-marc.zyngier@arm.com Signed-off-by: Ingo Molnar

jump_label: Move CPU hotplug locking

2017-08-10T10:28:58Z

As we're about to rework the locking, let's move the taking and release of the CPU hotplug lock to locations that will make its reworking completely obvious. Signed-off-by: Marc Zyngier Signed-off-by: Peter Zijlstra (Intel) Cc: Leo Yan Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20170801080257.5056-2-marc.zyngier@arm.com Signed-off-by: Ingo Molnar

jump_label: Add RELEASE barrier after text changes

2017-08-10T10:28:57Z

In the unlikely case text modification does not fully order things, add some extra ordering of our own to ensure we only enabled the fast path after all text is visible. Signed-off-by: Peter Zijlstra (Intel) Cc: Jason Baron Cc: Linus Torvalds Cc: Paolo Bonzini Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar

jump_label: Fix concurrent static_key_enable/disable()

2017-08-10T10:28:56Z

static_key_enable/disable are trying to cap the static key count to 0/1. However, their use of key->enabled is outside jump_label_lock so they do not really ensure that. Rewrite them to do a quick check for an already enabled (respectively, already disabled), and then recheck under the jump label lock. Unlike static_key_slow_inc/dec, a failed check under the jump label lock does not modify key->enabled. Signed-off-by: Paolo Bonzini Signed-off-by: Peter Zijlstra (Intel) Cc: Eric Dumazet Cc: Jason Baron Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1501601046-35683-2-git-send-email-pbonzini@redhat.com Signed-off-by: Ingo Molnar

jump_label: Reorder hotplug lock and jump_label_lock

2017-05-26T08:10:45Z

The conversion of the hotplug locking to a percpu rwsem unearthed lock ordering issues all over the place. The jump_label code has two issues: 1) Nested get_online_cpus() invocations 2) Ordering problems vs. the cpus rwsem and the jump_label_mutex To cure these, the following lock order has been established; cpus_rwsem -> jump_label_lock -> text_mutex Even if not all architectures need protection against CPU hotplug, taking cpus_rwsem before jump_label_lock is now mandatory in code pathes which actually modify code and therefor need text_mutex protection. Move the get_online_cpus() invocations into the core jump label code and establish the proper lock order where required. Signed-off-by: Thomas Gleixner Acked-by: Ingo Molnar Acked-by: "David S. Miller" Cc: Paul E. McKenney Cc: Chris Metcalf Cc: Peter Zijlstra Cc: Sebastian Siewior Cc: Steven Rostedt Cc: Jason Baron Cc: Ralf Baechle Link: http://lkml.kernel.org/r/20170524081549.025830817@linutronix.de

Merge tag 'trace-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-02-27T21:26:17Z

Pull tracing updates from Steven Rostedt: "This release has no new tracing features, just clean ups, minor fixes and small optimizations" * tag 'trace-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (25 commits) tracing: Remove outdated ring buffer comment tracing/probes: Fix a warning message to show correct maximum length tracing: Fix return value check in trace_benchmark_reg() tracing: Use modern function declaration jump_label: Reduce the size of struct static_key tracing/probe: Show subsystem name in messages tracing/hwlat: Update old comment about migration timers: Make flags output in the timer_start tracepoint useful tracing: Have traceprobe_probes_write() not access userspace unnecessarily tracing: Have COMM event filter key be treated as a string ftrace: Have set_graph_function handle multiple functions in one write ftrace: Do not hold references of ftrace_graph_{notrace_}hash out of graph_lock tracing: Reset parser->buffer to allow multiple "puts" ftrace: Have set_graph_functions handle write with RDWR ftrace: Reset fgd->hash in ftrace_graph_write() ftrace: Replace (void *)1 with a meaningful macro name FTRACE_GRAPH_EMPTY ftrace: Create a slight optimization on searching the ftrace_hash tracing: Add ftrace_hash_key() helper function ftrace: Convert graph filter to use hash tables ftrace: Expose ftrace_hash_empty and ftrace_lookup_ip ...

jump_label: Reduce the size of struct static_key

2017-02-15T14:02:26Z

The static_key->next field goes mostly unused. The field is used for associating module uses with a static key. Most uses of struct static_key define a static key in the core kernel and make use of it entirely within the core kernel, or define the static key in a module and make use of it only from within that module. In fact, of the ~3,000 static keys defined, I found only about 5 or so that did not fit this pattern. Thus, we can remove the static_key->next field entirely and overload the static_key->entries field. That is, when all the static_key uses are contained within the same module, static_key->entries continues to point to those uses. However, if the static_key uses are not contained within the module where the static_key is defined, then we allocate a struct static_key_mod, store a pointer to the uses within that struct static_key_mod, and have the static key point at the static_key_mod. This does incur some extra memory usage when a static_key is used in a module that does not define it, but since there are only a handful of such cases there is a net savings. In order to identify if the static_key->entries pointer contains a struct static_key_mod or a struct jump_entry pointer, bit 1 of static_key->entries is set to 1 if it points to a struct static_key_mod and is 0 if it points to a struct jump_entry. We were already using bit 0 in a similar way to store the initial value of the static_key. This does mean that allocations of struct static_key_mod and that the struct jump_entry tables need to be at least 4-byte aligned in memory. As far as I can tell all arches meet this criteria. For my .config, the patch increased the text by 778 bytes, but reduced the data + bss size by 14912, for a net savings of 14,134 bytes. text data bss dec hex filename 8092427 5016512 790528 13899467 d416cb vmlinux.pre 8093205 5001600 790528 13885333 d3df95 vmlinux.post Link: http://lkml.kernel.org/r/1486154544-4321-1-git-send-email-jbaron@akamai.com Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Joe Perches Signed-off-by: Jason Baron Signed-off-by: Steven Rostedt (VMware)

jump_labels: API for flushing deferred jump label updates

2017-01-12T13:33:16Z

Modules that use static_key_deferred need a way to synchronize with any delayed work that is still pending when the module is unloaded. Introduce static_key_deferred_flush() which flushes any pending jump label updates. Signed-off-by: David Matlack Cc: stable@vger.kernel.org Acked-by: Peter Zijlstra (Intel) Signed-off-by: Paolo Bonzini

Merge tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-08-05T13:00:54Z

Pull more powerpc updates from Michael Ellerman: "These were delayed for various reasons, so I let them sit in next a bit longer, rather than including them in my first pull request. Fixes: - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan - Move register_process_table() out of ppc_md from Michael Ellerman Use jump_label use for [cpu|mmu]_has_feature(): - Add mmu_early_init_devtree() from Michael Ellerman - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman - Do hash device tree scanning earlier from Michael Ellerman - Do radix device tree scanning earlier from Michael Ellerman - Do feature patching before MMU init from Michael Ellerman - Check features don't change after patching from Michael Ellerman - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V - Convert mmu_has_feature() to returning bool from Michael Ellerman - Convert cpu_has_feature() to returning bool from Michael Ellerman - Define radix_enabled() in one place & use static inline from Michael Ellerman - Add early_[cpu|mmu]_has_feature() from Michael Ellerman - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V - Remove mfvtb() from Kevin Hao - Move cpu_has_feature() to a separate file from Kevin Hao - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman - Add option to use jump label for cpu_has_feature() from Kevin Hao - Add option to use jump label for mmu_has_feature() from Kevin Hao - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V - Annotate jump label assembly from Michael Ellerman TLB flush enhancements from Aneesh Kumar K.V: - radix: Implement tlb mmu gather flush efficiently - Add helper for finding SLBE LLP encoding - Use hugetlb flush functions - Drop multiple definition of mm_is_core_local - radix: Add tlb flush of THP ptes - radix: Rename function and drop unused arg - radix/hugetlb: Add helper for finding page size - hugetlb: Add flush_hugetlb_tlb_range - remove flush_tlb_page_nohash Add new ptrace regsets from Anshuman Khandual and Simon Guo: - elf: Add powerpc specific core note sections - Add the function flush_tmregs_to_thread - Enable in transaction NT_PRFPREG ptrace requests - Enable in transaction NT_PPC_VMX ptrace requests - Enable in transaction NT_PPC_VSX ptrace requests - Adapt gpr32_get, gpr32_set functions for transaction - Enable support for NT_PPC_CGPR - Enable support for NT_PPC_CFPR - Enable support for NT_PPC_CVMX - Enable support for NT_PPC_CVSX - Enable support for TM SPR state - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR - Enable support for EBB registers - Enable support for Performance Monitor registers" * tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc/mm: Move register_process_table() out of ppc_md powerpc/perf: Fix incorrect event codes in power9-event-list powerpc/32: Fix early access to cpu_spec relocation powerpc/ptrace: Enable support for Performance Monitor registers powerpc/ptrace: Enable support for EBB registers powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR powerpc/ptrace: Enable support for TM SPR state powerpc/ptrace: Enable support for NT_PPC_CVSX powerpc/ptrace: Enable support for NT_PPC_CVMX powerpc/ptrace: Enable support for NT_PPC_CFPR powerpc/ptrace: Enable support for NT_PPC_CGPR powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests powerpc/process: Add the function flush_tmregs_to_thread elf: Add powerpc specific core note sections powerpc/mm: remove flush_tlb_page_nohash powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range ...