linux/kernel/kprobes.c, branch v5.8

kprobes: Do not expose probe addresses to non-CAP_SYSLOG

2020-07-08T23:00:22Z

The kprobe show() functions were using "current"'s creds instead of the file opener's creds for kallsyms visibility. Fix to use seq_file->file->f_cred. Cc: Masami Hiramatsu Cc: stable@vger.kernel.org Fixes: 81365a947de4 ("kprobes: Show address of kprobes if kallsyms does") Fixes: ffb9bd68ebdb ("kprobes: Show blacklist addresses as same as kallsyms does") Signed-off-by: Kees Cook

kallsyms: Refactor kallsyms_show_value() to take cred

2020-07-08T22:59:57Z

In order to perform future tests against the cred saved during open(), switch kallsyms_show_value() to operate on a cred, and have all current callers pass current_cred(). This makes it very obvious where callers are checking the wrong credential in their "read" contexts. These will be fixed in the coming patches. Additionally switch return value to bool, since it is always used as a direct permission check, not a 0-on-success, negative-on-error style function return. Cc: stable@vger.kernel.org Signed-off-by: Kees Cook

kretprobe: Prevent triggering kretprobe from within kprobe_flush_task

2020-06-17T01:21:01Z

Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2 Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar Cc: "Gustavo A . R . Silva" Cc: Anders Roxell Cc: "Naveen N . Rao" Cc: Anil S Keshavamurthy Cc: David Miller Cc: Ingo Molnar Cc: Peter Zijlstra Cc: stable@vger.kernel.org Reported-by: "Ziqian SUN (Zamir)" Acked-by: Masami Hiramatsu Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt (VMware)

kprobes: Remove redundant arch_disarm_kprobe() call

2020-06-17T01:21:01Z

Fix to remove redundant arch_disarm_kprobe() call in force_unoptimize_kprobe(). This arch_disarm_kprobe() will be invoked if the kprobe is optimized but disabled, but that means the kprobe (optprobe) is unused (and unoptimized) state. In that case, unoptimize_kprobe() puts it in freeing_list and kprobe_optimizer (do_unoptimize_kprobes()) automatically disarm it. Thus this arch_disarm_kprobe() is redundant. Link: http://lkml.kernel.org/r/158927058719.27680.17183632908465341189.stgit@devnote2 Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex

2020-06-17T01:21:01Z

In kprobe_optimizer() kick_kprobe_optimizer() is called without kprobe_mutex, but this can race with other caller which is protected by kprobe_mutex. To fix that, expand kprobe_mutex protected area to protect kick_kprobe_optimizer() call. Link: http://lkml.kernel.org/r/158927057586.27680.5036330063955940456.stgit@devnote2 Fixes: cd7ebe2298ff ("kprobes: Use text_poke_smp_batch for optimizing") Cc: Ingo Molnar Cc: "Gustavo A . R . Silva" Cc: Anders Roxell Cc: "Naveen N . Rao" Cc: Anil S Keshavamurthy Cc: David Miller Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Ziqian SUN Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

kprobes: Use non RCU traversal APIs on kprobe_tables if possible

2020-06-17T01:21:01Z

Current kprobes uses RCU traversal APIs on kprobe_tables even if it is safe because kprobe_mutex is locked. Make those traversals to non-RCU APIs where the kprobe_mutex is locked. Link: http://lkml.kernel.org/r/158927056452.27680.9710575332163005121.stgit@devnote2 Reviewed-by: Joel Fernandes (Google) Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

kprobes: Suppress the suspicious RCU warning on kprobes

2020-06-17T01:21:01Z

Anders reported that the lockdep warns that suspicious RCU list usage in register_kprobe() (detected by CONFIG_PROVE_RCU_LIST.) This is because get_kprobe() access kprobe_table[] by hlist_for_each_entry_rcu() without rcu_read_lock. If we call get_kprobe() from the breakpoint handler context, it is run with preempt disabled, so this is not a problem. But in other cases, instead of rcu_read_lock(), we locks kprobe_mutex so that the kprobe_table[] is not updated. So, current code is safe, but still not good from the view point of RCU. Joel suggested that we can silent that warning by passing lockdep_is_held() to the last argument of hlist_for_each_entry_rcu(). Add lockdep_is_held(&kprobe_mutex) at the end of the hlist_for_each_entry_rcu() to suppress the warning. Link: http://lkml.kernel.org/r/158927055350.27680.10261450713467997503.stgit@devnote2 Reported-by: Anders Roxell Suggested-by: Joel Fernandes Reviewed-by: Joel Fernandes (Google) Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

kernel/kprobes.c: convert to use DEFINE_SEQ_ATTRIBUTE macro

2020-06-05T02:06:26Z

Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Kefeng Wang Signed-off-by: Andrew Morton Cc: Anil S Keshavamurthy Cc: "David S. Miller" Cc: Masami Hiramatsu Cc: Greg KH Cc: Ingo Molnar Cc: Al Viro Link: http://lkml.kernel.org/r/20200509064031.181091-4-wangkefeng.wang@huawei.com Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

kprobes: Prevent probes in .noinstr.text section

2020-05-19T13:56:20Z

Instrumentation is forbidden in the .noinstr.text section. Make kprobes respect this. Signed-off-by: Thomas Gleixner Reviewed-by: Alexandre Chartre Acked-by: Peter Zijlstra Acked-by: Masami Hiramatsu Link: https://lkml.kernel.org/r/20200505134100.179862032@linutronix.de