linux/kernel/power/Kconfig, branch v5.0

PM: Introduce an Energy Model management framework

2018-12-11T14:16:58Z

Several subsystems in the kernel (task scheduler and/or thermal at the time of writing) can benefit from knowing about the energy consumed by CPUs. Yet, this information can come from different sources (DT or firmware for example), in different formats, hence making it hard to exploit without a standard API. As an attempt to address this, introduce a centralized Energy Model (EM) management framework which aggregates the power values provided by drivers into a table for each performance domain in the system. The power cost tables are made available to interested clients (e.g. task scheduler or thermal) via platform-agnostic APIs. The overall design is represented by the diagram below (focused on Arm-related drivers as an example, but applicable to any architecture): +---------------+ +-----------------+ +-------------+ | Thermal (IPA) | | Scheduler (EAS) | | Other | +---------------+ +-----------------+ +-------------+ | | em_pd_energy() | | | em_cpu_get() | +-----------+ | +--------+ | | | v v v +---------------------+ | | | Energy Model | | | | Framework | | | +---------------------+ ^ ^ ^ | | | em_register_perf_domain() +----------+ | +---------+ | | | +---------------+ +---------------+ +--------------+ | cpufreq-dt | | arm_scmi | | Other | +---------------+ +---------------+ +--------------+ ^ ^ ^ | | | +--------------+ +---------------+ +--------------+ | Device Tree | | Firmware | | ? | +--------------+ +---------------+ +--------------+ Drivers (typically, but not limited to, CPUFreq drivers) can register data in the EM framework using the em_register_perf_domain() API. The calling driver must provide a callback function with a standardized signature that will be used by the EM framework to build the power cost tables of the performance domain. This design should offer a lot of flexibility to calling drivers which are free of reading information from any location and to use any technique to compute power costs. Moreover, the capacity states registered by drivers in the EM framework are not required to match real performance states of the target. This is particularly important on targets where the performance states are not known by the OS. The power cost coefficients managed by the EM framework are specified in milli-watts. Although the two potential users of those coefficients (IPA and EAS) only need relative correctness, IPA specifically needs to compare the power of CPUs with the power of other components (GPUs, for example), which are still expressed in absolute terms in their respective subsystems. Hence, specifying the power of CPUs in milli-watts should help transitioning IPA to using the EM framework without introducing new problems by keeping units comparable across sub-systems. On the longer term, the EM of other devices than CPUs could also be managed by the EM framework, which would enable to remove the absolute unit. However, this is not absolutely required as a first step, so this extension of the EM framework is left for later. On the client side, the EM framework offers APIs to access the power cost tables of a CPU (em_cpu_get()), and to estimate the energy consumed by the CPUs of a performance domain (em_pd_energy()). Clients such as the task scheduler can then use these APIs to access the shared data structures holding the Energy Model of CPUs. Signed-off-by: Quentin Perret Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Thomas Gleixner Cc: adharmap@codeaurora.org Cc: chris.redpath@arm.com Cc: currojerez@riseup.net Cc: dietmar.eggemann@arm.com Cc: edubezval@gmail.com Cc: gregkh@linuxfoundation.org Cc: javi.merino@kernel.org Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Cc: pkondeti@codeaurora.org Cc: skannan@codeaurora.org Cc: smuckle@google.com Cc: srinivas.pandruvada@linux.intel.com Cc: thara.gopinath@linaro.org Cc: tkjos@google.com Cc: valentin.schneider@arm.com Cc: vincent.guittot@linaro.org Cc: viresh.kumar@linaro.org Link: https://lkml.kernel.org/r/20181203095628.11858-4-quentin.perret@arm.com Signed-off-by: Ingo Molnar

PM / sleep: wakeup: Fix build error caused by missing SRCU support

2018-08-14T22:07:08Z

Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to select CONFIG_SRCU in Kconfig, which leads to the following build error if CONFIG_SRCU is not selected somewhere else: drivers/built-in.o: In function `wakeup_source_remove': (.text+0x3c6fc): undefined reference to `synchronize_srcu' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c7a8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c84c): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d1d8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d228): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d24c): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d29c): undefined reference to `__srcu_read_unlock' drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu' Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled. Fixes: ea0212f40c6 (power: auto select CONFIG_SRCU) Cc: 4.2+ # 4.2+ Signed-off-by: zhangyi (F) [ rjw: Minor subject/changelog fixups ] Signed-off-by: Rafael J. Wysocki

PM / OPP: Move the OPP directory out of power/

2017-10-03T00:45:12Z

The drivers/base/power/ directory is special and contains code related to power management core like system suspend/resume, hibernation, etc. It was fine to keep the OPP code inside it when we had just one file for it, but it is growing now and already has a directory for itself. Lets move it directly under drivers/ directory, just like cpufreq and cpuidle. Signed-off-by: Viresh Kumar Acked-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki

PM / sleep: Increase default DPM watchdog timeout to 120

2016-09-13T00:15:58Z

Recently we have a new report that, the harddisk can not resume on time due to firmware issues, and got a kernel panic because of DPM watchdog timeout. So adjust the default timeout from 60 to 120 to survive on this platform, and make DPM_WATCHDOG depending on EXPERT. Link: https://bugzilla.kernel.org/show_bug.cgi?id=117971 Suggested-by: Pavel Machek Suggested-by: Rafael J. Wysocki Reported-by: Higuita Signed-off-by: Chen Yu Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM: APM_EMULATION does not depend on PM

2016-01-27T22:20:14Z

The APM emulation code does multiple things, and some of them depend on PM_SLEEP, while the battery management does not. However, selecting the symbol like SHARPSL_PM does causes a Kconfig warning: warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION) From all I can tell, this is completely harmless, and we can simply allow APM_EMULATION to be enabled here, even if PM is not. Signed-off-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki

PM / suspend: make sync() on suspend-to-RAM build-time optional

2015-07-31T21:46:05Z

The Linux kernel suspend path has traditionally invoked sys_sync() before freezing user threads. But sys_sync() can be expensive, and some user-space OS's do not want the kernel to pay the cost of sys_sync() on every suspend -- preferring invoke sync() from user-space if/when they want it. So make sys_sync on suspend build-time optional. The default is unchanged. Signed-off-by: Len Brown Signed-off-by: Rafael J. Wysocki

PM / sleep: Increase default DPM watchdog timeout to 60

2015-06-24T22:35:16Z

Many harddisks (mostly WD ones) have firmware problems and take too long, more than 10 seconds, to resume from suspend. And this often exceeds the default DPM watchdog timeout (12 seconds), resulting in a kernel panic out of sudden. Since most distros just take the default as is, we should give a bit more safer value. This patch increases the default value from 12 seconds to one minute, which has been confirmed to be long enough for such problematic disks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921 Fixes: 70fea60d888d (PM / Sleep: Detect device suspend/resume lockup and log event) Cc: 3.13+ # 3.13+ Signed-off-by: Takashi Iwai Signed-off-by: Rafael J. Wysocki

rcu: Make SRCU optional by using CONFIG_SRCU

2015-01-06T19:04:29Z

SRCU is not necessary to be compiled by default in all cases. For tinification efforts not compiling SRCU unless necessary is desirable. The current patch tries to make compiling SRCU optional by introducing a new Kconfig option CONFIG_SRCU which is selected when any of the components making use of SRCU are selected. If we do not select CONFIG_SRCU, srcu.o will not be compiled at all. text data bss dec hex filename 2007 0 0 2007 7d7 kernel/rcu/srcu.o Size of arch/powerpc/boot/zImage changes from text data bss dec hex filename 831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before 829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after so the savings are about ~2000 bytes. Signed-off-by: Pranith Kumar CC: Paul E. McKenney CC: Josh Triplett CC: Lai Jiangshan Signed-off-by: Paul E. McKenney [ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]

PM: Eliminate CONFIG_PM_RUNTIME

2014-12-19T21:55:06Z

Having switched over all of the users of CONFIG_PM_RUNTIME to use CONFIG_PM directly, turn the latter into a user-selectable option and drop the former entirely from the tree. Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Acked-by: Kevin Hilman

Merge branch 'pm-runtime'

2014-12-08T19:00:44Z

* pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...