linux/kernel/power, branch v2.6.19

[PATCH] swsusp: debugging

2006-11-03T20:27:58Z

Add a swsusp debugging mode. This does everything that's needed for a suspend except for actually suspending. So we can look in the log messages and work out a) what code is being slow and b) which drivers are misbehaving. (1) # echo testproc > /sys/power/disk # echo disk > /sys/power/state This should turn off the non-boot CPU, freeze all processes, wait for 5 seconds and then thaw the processes and the CPU. (2) # echo test > /sys/power/disk # echo disk > /sys/power/state This should turn off the non-boot CPU, freeze all processes, shrink memory, suspend all devices, wait for 5 seconds, resume the devices etc. Cc: Pavel Machek Cc: Stefan Seyfried Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] swsusp: fix memory leaks

2006-10-17T15:18:44Z

My fancy new swsusp IO code had a big memory leak. It's somewhat invisible because the whole mem_map[] gets overwritten after resume, but it can cause us to get low on memory during the actual suspend process. Cc: "Rafael J. Wysocki" Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] swsusp: Use suspend_console

2006-10-11T18:14:14Z

Add suspend_console() and resume_console() to the suspend-to-disk code paths so that the users of netconsole can use swsusp with it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] swsusp: Make userland suspend work on SMP again

2006-10-07T17:51:14Z

Unfortunately one of the recent changes in swsusp has broken the userland suspend on SMP. Fix it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05T14:10:12Z

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)

[PATCH] namespaces: utsname: use init_utsname when appropriate

2006-10-02T14:57:21Z

In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: Serge E. Hallyn Cc: Kirill Korotaev Cc: "Eric W. Biederman" Cc: Herbert Poetzl Cc: Andrey Savochkin Cc: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

2006-09-26T18:49:46Z

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits) Driver core: Don't call put methods while holding a spinlock Driver core: Remove unneeded routines from driver core Driver core: Fix potential deadlock in driver core PCI: enable driver multi-threaded probe Driver Core: add ability for drivers to do a threaded probe sysfs: add proper sysfs_init() prototype drivers/base: check errors drivers/base: Platform notify needs to occur before drivers attach to the device v4l-dev2: handle __must_check add CONFIG_ENABLE_MUST_CHECK add __must_check to device management code Driver core: fixed add_bind_files() definition Driver core: fix comments in drivers/base/power/resume.c sysfs_remove_bin_file: no return value, dump_stack on error kobject: must_check fixes Driver core: add ability for devices to create and remove bin files Class: add support for class interfaces for devices Driver core: create devices/virtual/ tree Driver core: add device_rename function Driver core: add ability for classes to handle devices properly ...

[PATCH] PM: Add pm_trace switch

2006-09-26T15:49:04Z

Add the pm_trace attribute in /sys/power which has to be explicitly set to one to really enable the "PM tracing" code compiled in when CONFIG_PM_TRACE is set (which modifies the machine's CMOS clock in unpredictable ways). Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] PM: make it possible to disable console suspending

2006-09-26T15:49:03Z

Change suspend_console() so that it waits for all consoles to flush the remaining messages and make it possible to switch the console suspending off with the help of a Kconfig option. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Cc: Stefan Seyfried Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] swsusp: Use memory bitmaps during resume

2006-09-26T15:49:02Z

Make swsusp use memory bitmaps to store its internal information during the resume phase of the suspend-resume cycle. If the pfns of saveable pages are saved during the suspend phase instead of the kernel virtual addresses of these pages, we can use them during the resume phase directly to set the corresponding bits in a memory bitmap. Then, this bitmap is used to mark the page frames corresponding to the pages that were saveable before the suspend (aka "unsafe" page frames). Next, we allocate as many page frames as needed to store the entire suspend image and make sure that there will be some extra free "safe" page frames for the list of PBEs constructed later. Subsequently, the image is loaded and, if possible, the data loaded from it are written into their "original" page frames (ie. the ones they had occupied before the suspend). The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in a list of PBEs. Finally, the list of PBEs is used to copy the remaining image data into their "original" page frames (this is done atomically, by the architecture-dependent parts of swsusp). Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds