linux/kernel/power, branch v5.2

PCI: PM: Avoid skipping bus-level PM on platforms without ACPI

2019-06-26T21:51:56Z

There are platforms that do not call pm_set_suspend_via_firmware(), so pm_suspend_via_firmware() returns 'false' on them, but the power states of PCI devices (PCIe ports in particular) are changed as a result of powering down core platform components during system-wide suspend. Thus the pm_suspend_via_firmware() checks in pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to- idle") are not sufficient to determine that devices left in D0 during suspend will remain in D0 during resume and so the bus-level power management can be skipped for them. For this reason, introduce a new global suspend flag, PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only and replace the pm_suspend_via_firmware() checks mentioned above with checks against this flag. Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle") Reported-by: Jon Hunter Tested-by: Jon Hunter Signed-off-by: Rafael J. Wysocki Tested-by: Mika Westerberg Reviewed-by: Mika Westerberg

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 248

2019-06-19T15:09:08Z

Based on 1 normalized pattern(s): this file is released under the gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Reviewed-by: Armijn Hemel Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204655.103854853@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-06-08T19:52:42Z

Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...

Merge branch 'pm-x86'

2019-06-07T08:48:57Z

* pm-x86: x86/power: Fix 'nosmt' vs hibernation triple fault during resume x86: intel_epb: Do not build when CONFIG_PM is unset

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428

2019-06-05T15:37:16Z

Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Armijn Hemel Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/power: Fix 'nosmt' vs hibernation triple fault during resume

2019-06-03T10:02:03Z

As explained in 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") we always, no matter what, have to bring up x86 HT siblings during boot at least once in order to avoid first MCE bringing the system to its knees. That means that whenever 'nosmt' is supplied on the kernel command-line, all the HT siblings are as a result sitting in mwait or cpudile after going through the online-offline cycle at least once. This causes a serious issue though when a kernel, which saw 'nosmt' on its commandline, is going to perform resume from hibernation: if the resume from the hibernated image is successful, cr3 is flipped in order to point to the address space of the kernel that is being resumed, which in turn means that all the HT siblings are all of a sudden mwaiting on address which is no longer valid. That results in triple fault shortly after cr3 is switched, and machine reboots. Fix this by always waking up all the SMT siblings before initiating the 'restore from hibernation' process; this guarantees that all the HT siblings will be properly carried over to the resumed kernel waiting in resume_play_dead(), and acted upon accordingly afterwards, based on the target kernel configuration. Symmetricaly, the resumed kernel has to push the SMT siblings to mwait again in case it has SMT disabled; this means it has to online all the siblings when resuming (so that they come out of hlt) and offline them again to let them reach mwait. Cc: 4.19+ # v4.19+ Debugged-by: Thomas Gleixner Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") Signed-off-by: Jiri Kosina Acked-by: Pavel Machek Reviewed-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Signed-off-by: Rafael J. Wysocki

PM: sleep: Add kerneldoc comments to some functions

2019-06-03T08:44:21Z

Add kerneldoc comments to pm_suspend_via_firmware(), pm_resume_via_firmware() and pm_suspend_via_s2idle() to explain what they do. Signed-off-by: Rafael J. Wysocki

ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation

2019-05-27T08:51:45Z

On systems with ACPI platform firmware the last stage of hibernation is analogous to system suspend to S3 (suspend-to-RAM), so it should be handled analogously. In particular, pm_suspend_via_firmware() should return 'true' in that stage to let the callers of it know that control will be passed to the platform firmware going forward, so pm_set_suspend_via_firmware() needs to be called then in analogy with acpi_suspend_begin(). However, the platform hibernation ->begin() callback is invoked during the "freeze" transition (before creating a snapshot image of system memory) as well as during the "hibernate" transition which is the last stage of it and pm_set_suspend_via_firmware() should be invoked by that callback in the latter stage only. In order to implement that redefine the hibernation ->begin() callback to take a pm_message_t argument to indicate which stage of hibernation is taking place and rework acpi_hibernation_begin() and acpi_hibernation_begin_old() to take it into account as needed. Signed-off-by: Rafael J. Wysocki

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45Z

Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman