linux/kernel/power, branch v6.3

Merge branches 'powercap', 'pm-domains', 'pm-em' and 'pm-opp'

2023-02-15T19:06:26Z

Merge updates of the powercap framework, generic PM domains, Energy Model and operating performance points for 6.3-rc1: - Fix possible name leak in powercap_register_zone() (Yang Yingliang). - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui). - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada). - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui). - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman). - Add missing 'cache-unified' property in example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Remove "select SRCU" (Paul E. McKenney). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio). * powercap: powercap: intel_rapl: Fix handling for large time window powercap: idle_inject: Support 100% idle injection powercap: intel_rapl: add support for Emerald Rapids powercap: intel_rapl: add support for Meteor Lake powercap: fix possible name leak in powercap_register_zone() * pm-domains: PM: domains: fix memory leak with using debugfs_lookup() * pm-em: PM: EM: fix memory leak with using debugfs_lookup() * pm-opp: OPP: fix error checking in opp_migrate_dentry() dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array drivers/opp: Remove "select SRCU" dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example

PM: EM: fix memory leak with using debugfs_lookup()

2023-02-09T19:36:10Z

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki

PM: sleep: Remove "select SRCU"

2023-01-20T16:53:07Z

Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney Reviewed-by: John Ogness Signed-off-by: Rafael J. Wysocki

PM: hibernate: swap: don't use /** for non-kernel-doc comments

2023-01-20T13:49:48Z

kernel-doc complains about multiple occurrences of "/**" being used for something that is not a kernel-doc comment, so change all of these to just use "/*" comment style. The warning message for all of these is: FILE:LINE: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst kernel/power/swap.c:585: warning: ... Structure used for CRC32. kernel/power/swap.c:600: warning: ... * CRC32 update function that runs in its own thread. kernel/power/swap.c:627: warning: ... * Structure used for LZO data compression. kernel/power/swap.c:644: warning: ... * Compression function that runs in its own thread. kernel/power/swap.c:952: warning: ... * The following functions allow us to read data using a swap map kernel/power/swap.c:1111: warning: ... * Structure used for LZO data decompression. kernel/power/swap.c:1127: warning: ... * Decompression function that runs in its own thread. Also correct one spello/typo. Signed-off-by: Randy Dunlap Signed-off-by: Rafael J. Wysocki

PM: sleep: Refine error message in try_to_freeze_tasks()

2022-12-06T11:04:34Z

A previous change amended try_to_freeze_tasks() with the "what" variable pointing to a string describing the group of tasks subject to the freezing which may be used in the error message in there too, so make that happen. Accordingly, update sleepgraph.py to catch the modified error message as appropriate. Signed-off-by: Rafael J. Wysocki Reviewed-by: Petr Mladek

PM: sleep: Avoid using pr_cont() in the tasks freezing code

2022-12-06T11:04:10Z

Using pr_cont() in the tasks freezing code related to system-wide suspend and hibernation is problematic, because the continuation messages printed there are susceptible to interspersing with other unrelated messages which results in output that is hard to understand. Address this issue by modifying try_to_freeze_tasks() to print messages that don't require continuations and adjusting its callers accordingly. Reported-by: Thomas Weißschuh Signed-off-by: Rafael J. Wysocki Reviewed-by: Petr Mladek

PM: hibernate: Complain about memory map mismatches during resume

2022-12-01T18:20:14Z

The system memory map can change over a hibernation-restore cycle due to a defect in the platform firmware, and some of the page frames used by the kernel before hibernation may not be available any more during the subsequent restore which leads to the error below. [ T357] PM: Image loading progress: 0% [ T357] PM: Read 2681596 kbytes in 0.03 seconds (89386.53 MB/s) [ T357] PM: Error -14 resuming [ T357] PM: Failed to load hibernation image, recovering. [ T357] PM: Basic memory bitmaps freed [ T357] OOM killer enabled. [ T357] Restarting tasks ... done. [ T357] PM: resume from hibernation failed (-14) [ T357] PM: Hibernation image not present or could not be loaded. Add an error message to the unpack() function to allow problematic page frames to be identified and the source of the problem to be diagnosed more easily. This can save developers quite a bit of debugging time. Signed-off-by: Xueqin Luo [ rjw: New subject, edited changelog ] Signed-off-by: Rafael J. Wysocki

PM: hibernate: Fix mistake in kerneldoc comment

2022-11-03T16:32:58Z

The actual maximum image size formula in hibernate_preallocate_memory() is as follows: max_size = (count - (size + PAGES_FOR_IO)) / 2 - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE); but the one in the kerneldoc comment of the function is different and incorrect. Fixes: ddeb64870810 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers") Signed-off-by: xiongxin [ rjw: Subject and changelog rewrite ] Signed-off-by: Rafael J. Wysocki

PM: hibernate: Allow hybrid sleep to work with s2idle

2022-10-25T12:53:19Z

Hybrid sleep is currently hardcoded to only operate with S3 even on systems that might not support it. Instead of assuming this mode is what the user wants to use, for hybrid sleep follow the setting of `mem_sleep_current` which will respect mem_sleep_default kernel command line and policy decisions made by the presence of the FADT low power idle bit. Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()") Reported-and-tested-by: kolAflash Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574 Signed-off-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki

Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2022-10-10T16:10:28Z

Pull scheduler updates from Ingo Molnar: "Debuggability: - Change most occurances of BUG_ON() to WARN_ON_ONCE() - Reorganize & fix TASK_ state comparisons, turn it into a bitmap - Update/fix misc scheduler debugging facilities Load-balancing & regular scheduling: - Improve the behavior of the scheduler in presence of lot of SCHED_IDLE tasks - in particular they should not impact other scheduling classes. - Optimize task load tracking, cleanups & fixes - Clean up & simplify misc load-balancing code Freezer: - Rewrite the core freezer to behave better wrt thawing and be simpler in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting all the fallout. Deadline scheduler: - Fix the DL capacity-aware code - Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period() - Relax/optimize locking in task_non_contending() Cleanups: - Factor out the update_current_exec_runtime() helper - Various cleanups, simplifications" * tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) sched: Fix more TASK_state comparisons sched: Fix TASK_state comparisons sched/fair: Move call to list_last_entry() in detach_tasks sched/fair: Cleanup loop_max and loop_break sched/fair: Make sure to try to detach at least one movable task sched: Show PF_flag holes freezer,sched: Rewrite core freezer logic sched: Widen TAKS_state literals sched/wait: Add wait_event_state() sched/completion: Add wait_for_completion_state() sched: Add TASK_ANY for wait_task_inactive() sched: Change wait_task_inactive()s match_state freezer,umh: Clean up freezer/initrd interaction freezer: Have {,un}lock_system_sleep() save/restore flags sched: Rename task_running() to task_on_cpu() sched/fair: Cleanup for SIS_PROP sched/fair: Default to false in test_idle_cores() sched/fair: Remove useless check in select_idle_core() sched/fair: Avoid double search on same cpu sched/fair: Remove redundant check in select_idle_smt() ...