linux/kernel/sched/cpuacct.c, branch v4.6

Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-03-24T16:42:50Z

Pull scheduler fixes from Ingo Molnar: "Misc fixes: a cgroup fix, a fair-scheduler migration accounting fix, a cputime fix and two cpuacct cleanups" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpuacct: Simplify the cpuacct code sched/cpuacct: Rename parameter in cpuusage_write() for readability sched/fair: Add comments to explain select_idle_sibling() sched/fair: Fix fairness issue on migration sched/cgroup: Fix/cleanup cgroup teardown/init sched/cputime: Fix steal time accounting vs. CPU hotplug

sched/cpuacct: Simplify the cpuacct code

2016-03-21T10:00:28Z

- Use for() instead of while() loop in some functions to make the code simpler. - Use this_cpu_ptr() instead of per_cpu_ptr() to make the code cleaner and a bit faster. Suggested-by: Peter Zijlstra Signed-off-by: Zhao Lei Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Tejun Heo Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/d8a7ef9592f55224630cb26dea239f05b6398a4e.1458187654.git.zhaolei@cn.fujitsu.com Signed-off-by: Ingo Molnar

sched/cpuacct: Rename parameter in cpuusage_write() for readability

2016-03-21T09:59:29Z

The name of the 'reset' parameter to cpuusage_write() is quite confusing, because the only valid value we allow is '0', so !reset is actually the case that resets ... Rename it to 'val' and explain it in a comment that we only allow 0. Signed-off-by: Dongsheng Yang Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: cgroups@vger.kernel.org Cc: tj@kernel.org Link: http://lkml.kernel.org/r/1450696483-2864-1-git-send-email-yangds.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar

cgroup: convert cgroup_subsys flag fields to bool bitfields

2016-02-23T15:00:50Z

Signed-off-by: Tejun Heo Cc: Li Zefan Cc: Ingo Molnar Cc: Peter Zijlstra

cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes

2014-07-15T15:05:09Z

Currently, cgroup_subsys->base_cftypes is used for both the unified default hierarchy and legacy ones and subsystems can mark each file with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear only on one of them. This is quite hairy and error-prone. Also, we may end up exposing interface files to the default hierarchy without thinking it through. cgroup_subsys will grow two separate cftype arrays and apply each only on the hierarchies of the matching type. This will allow organizing cftypes in a lot clearer way and encourage subsystems to scrutinize the interface which is being exposed in the new default hierarchy. In preparation, this patch renames cgroup_subsys->base_cftypes to cgroup_subsys->legacy_cftypes. This patch is pure rename. Signed-off-by: Tejun Heo Acked-by: Neil Horman Acked-by: Li Zefan Cc: Johannes Weiner Cc: Michal Hocko Cc: Vivek Goyal Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Ingo Molnar Cc: Arnaldo Carvalho de Melo Cc: Aristeu Rozanski Cc: Aneesh Kumar K.V

cgroup: remove css_parent()

2014-05-16T17:22:48Z

cgroup in general is moving towards using cgroup_subsys_state as the fundamental structural component and css_parent() was introduced to convert from using cgroup->parent to css->parent. It was quite some time ago and we're moving forward with making css more prominent. This patch drops the trivial wrapper css_parent() and let the users dereference css->parent. While at it, explicitly mark fields of css which are public and immutable. v2: New usage from device_cgroup.c converted. Signed-off-by: Tejun Heo Acked-by: Michal Hocko Acked-by: Neil Horman Acked-by: "David S. Miller" Acked-by: Li Zefan Cc: Vivek Goyal Cc: Jens Axboe Cc: Peter Zijlstra Cc: Johannes Weiner

cgroup: clean up cgroup_subsys names and initialization

2014-02-08T15:36:58Z

cgroup_subsys is a bit messier than it needs to be. * The name of a subsys can be different from its internal identifier defined in cgroup_subsys.h. Most subsystems use the matching name but three - cpu, memory and perf_event - use different ones. * cgroup_subsys_id enums are postfixed with _subsys_id and each cgroup_subsys is postfixed with _subsys. cgroup.h is widely included throughout various subsystems, it doesn't and shouldn't have claim on such generic names which don't have any qualifier indicating that they belong to cgroup. * cgroup_subsys->subsys_id should always equal the matching cgroup_subsys_id enum; however, we require each controller to initialize it and then BUG if they don't match, which is a bit silly. This patch cleans up cgroup_subsys names and initialization by doing the followings. * cgroup_subsys_id enums are now postfixed with _cgrp_id, and each cgroup_subsys with _cgrp_subsys. * With the above, renaming subsys identifiers to match the userland visible names doesn't cause any naming conflicts. All non-matching identifiers are renamed to match the official names. cpu_cgroup -> cpu mem_cgroup -> memory perf -> perf_event * controllers no longer need to initialize ->subsys_id and ->name. They're generated in cgroup core and set automatically during boot. * Redundant cgroup_subsys declarations removed. * While updating BUG_ON()s in cgroup_init_early(), convert them to WARN()s. BUGging that early during boot is stupid - the kernel can't print anything, even through serial console and the trap handler doesn't even link stack frame properly for back-tracing. This patch doesn't introduce any behavior changes. v2: Rebased on top of fe1217c4f3f7 ("net: net_cls: move cgroupfs classid handling into core"). Signed-off-by: Tejun Heo Acked-by: Neil Horman Acked-by: "David S. Miller" Acked-by: "Rafael J. Wysocki" Acked-by: Michal Hocko Acked-by: Peter Zijlstra Acked-by: Aristeu Rozanski Acked-by: Ingo Molnar Acked-by: Li Zefan Cc: Johannes Weiner Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Cc: Serge E. Hallyn Cc: Vivek Goyal Cc: Thomas Graf

cgroup: replace cftype->read_seq_string() with cftype->seq_show()

2013-12-05T17:28:04Z

In preparation of conversion to kernfs, cgroup file handling is updated so that it can be easily mapped to kernfs. This patch replaces cftype->read_seq_string() with cftype->seq_show() which is not limited to single_open() operation and will map directcly to kernfs seq_file interface. The conversions are mechanical. As ->seq_show() doesn't have @css and @cft, the functions which make use of them are converted to use seq_css() and seq_cft() respectively. In several occassions, e.f. if it has seq_string in its name, the function name is updated to fit the new method better. This patch does not introduce any behavior changes. Signed-off-by: Tejun Heo Acked-by: Aristeu Rozanski Acked-by: Vivek Goyal Acked-by: Michal Hocko Acked-by: Daniel Wagner Acked-by: Li Zefan Cc: Jens Axboe Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Johannes Weiner Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Cc: Neil Horman

cgroup, sched: convert away from cftype->read_map()

2013-12-05T17:28:01Z

In preparation of conversion to kernfs, cgroup file handling is being consolidated so that it can be easily mapped to the seq_file based interface of kernfs. cftype->read_map() doesn't add any value and being replaced with ->read_seq_string(). Update cpu_stats_show() and cpuacct_stats_show() accordingly. This patch doesn't make any visible behavior changes. Signed-off-by: Tejun Heo Acked-by: Li Zefan Cc: Ingo Molnar Cc: Peter Zijlstra

cgroup: pass around cgroup_subsys_state instead of cgroup in file methods

2013-08-09T00:11:24Z

cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo Acked-by: Li Zefan Acked-by: Michal Hocko Acked-by: Vivek Goyal Acked-by: Aristeu Rozanski Acked-by: Daniel Wagner Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Johannes Weiner Cc: Balbir Singh Cc: Matt Helsley Cc: Jens Axboe Cc: Steven Rostedt