linux/kernel/sys_ni.c, branch v5.0

y2038: socket: Add compat_sys_recvmmsg_time64

2018-12-18T15:13:04Z

recvmmsg() takes two arguments to pointers of structures that differ between 32-bit and 64-bit architectures: mmsghdr and timespec. For y2038 compatbility, we are changing the native system call from timespec to __kernel_timespec with a 64-bit time_t (in another patch), and use the existing compat system call on both 32-bit and 64-bit architectures for compatibility with traditional 32-bit user space. As we now have two variants of recvmmsg() for 32-bit tasks that are both different from the variant that we use on 64-bit tasks, this means we also require two compat system calls! The solution I picked is to flip things around: The existing compat_sys_recvmmsg() call gets moved from net/compat.c into net/socket.c and now handles the case for old user space on all architectures that have set CONFIG_COMPAT_32BIT_TIME. A new compat_sys_recvmmsg_time64() call gets added in the old place for 64-bit architectures only, this one handles the case of a compat mmsghdr structure combined with __kernel_timespec. In the indirect sys_socketcall(), we now need to call either do_sys_recvmmsg() or __compat_sys_recvmmsg(), depending on what kind of architecture we are on. For compat_sys_socketcall(), no such change is needed, we always call __compat_sys_recvmmsg(). I decided to not add a new SYS_RECVMMSG_TIME64 socketcall: Any libc implementation for 64-bit time_t will need significant changes including an updated asm/unistd.h, and it seems better to consistently use the separate syscalls that configuration, leaving the socketcall only for backward compatibility with 32-bit time_t based libc. The naming is asymmetric for the moment, so both existing syscalls entry points keep their names, while the new ones are recvmmsg_time32 and compat_recvmmsg_time64 respectively. I expect that we will rename the compat syscalls later as we start using generated syscall tables everywhere and add these entry points. Signed-off-by: Arnd Bergmann

Merge branch 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-10T17:17:09Z

Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h

Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2018-06-07T17:23:33Z

Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...

rseq: Introduce restartable sequences system call

2018-06-06T09:58:31Z

Expose a new system call allowing each thread to register one userspace memory area to be used as an ABI between kernel and user-space for two purposes: user-space restartable sequences and quick access to read the current CPU number value from user-space. * Restartable sequences (per-cpu atomics) Restartables sequences allow user-space to perform update operations on per-cpu data without requiring heavy-weight atomic operations. The restartable critical sections (percpu atomics) work has been started by Paul Turner and Andrew Hunter. It lets the kernel handle restart of critical sections. [1] [2] The re-implementation proposed here brings a few simplifications to the ABI which facilitates porting to other architectures and speeds up the user-space fast path. Here are benchmarks of various rseq use-cases. Test hardware: arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading The following benchmarks were all performed on a single thread. * Per-CPU statistic counter increment getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 344.0 31.4 11.0 x86-64: 15.3 2.0 7.7 * LTTng-UST: write event 32-bit header, 32-bit payload into tracer per-cpu buffer getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 2502.0 2250.0 1.1 x86-64: 117.4 98.0 1.2 * liburcu percpu: lock-unlock pair, dereference, read/compare word getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 751.0 128.5 5.8 x86-64: 53.4 28.6 1.9 * jemalloc memory allocator adapted to use rseq Using rseq with per-cpu memory pools in jemalloc at Facebook (based on rseq 2016 implementation): The production workload response-time has 1-2% gain avg. latency, and the P99 overall latency drops by 2-3%. * Reading the current CPU number Speeding up reading the current CPU number on which the caller thread is running is done by keeping the current CPU number up do date within the cpu_id field of the memory area registered by the thread. This is done by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the current thread. Upon return to user-space, a notify-resume handler updates the current CPU value within the registered user-space memory area. User-space can then read the current CPU number directly from memory. Keeping the current cpu id in a memory area shared between kernel and user-space is an improvement over current mechanisms available to read the current CPU number, which has the following benefits over alternative approaches: - 35x speedup on ARM vs system call through glibc - 20x speedup on x86 compared to calling glibc, which calls vdso executing a "lsl" instruction, - 14x speedup on x86 compared to inlined "lsl" instruction, - Unlike vdso approaches, this cpu_id value can be read from an inline assembly, which makes it a useful building block for restartable sequences. - The approach of reading the cpu id through memory mapping shared between kernel and user-space is portable (e.g. ARM), which is not the case for the lsl-based x86 vdso. On x86, yet another possible approach would be to use the gs segment selector to point to user-space per-cpu data. This approach performs similarly to the cpu id cache, but it has two disadvantages: it is not portable, and it is incompatible with existing applications already using the gs segment selector for other purposes. Benchmarking various approaches for reading the current CPU number: ARMv7 Processor rev 4 (v7l) Machine model: Cubietruck - Baseline (empty loop): 8.4 ns - Read CPU from rseq cpu_id: 16.7 ns - Read CPU from rseq cpu_id (lazy register): 19.8 ns - glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns - getcpu system call: 234.9 ns x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz: - Baseline (empty loop): 0.8 ns - Read CPU from rseq cpu_id: 0.8 ns - Read CPU from rseq cpu_id (lazy register): 0.8 ns - Read using gs segment selector: 0.8 ns - "lsl" inline assembly: 13.0 ns - glibc 2.19-0ubuntu6 getcpu: 16.6 ns - getcpu system call: 53.9 ns - Speed (benchmark taken on v8 of patchset) Running 10 runs of hackbench -l 100000 seems to indicate, contrary to expectations, that enabling CONFIG_RSEQ slightly accelerates the scheduler: Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1 kernel parameter), with a Linux v4.6 defconfig+localyesconfig, restartable sequences series applied. * CONFIG_RSEQ=n avg.: 41.37 s std.dev.: 0.36 s * CONFIG_RSEQ=y avg.: 40.46 s std.dev.: 0.33 s - Size On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is 567 bytes, and the data size increase of vmlinux is 5696 bytes. [1] https://lwn.net/Articles/650333/ [2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdf Signed-off-by: Mathieu Desnoyers Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: Joel Fernandes Cc: Catalin Marinas Cc: Dave Watson Cc: Will Deacon Cc: Andi Kleen Cc: "H . Peter Anvin" Cc: Chris Lameter Cc: Russell King Cc: Andrew Hunter Cc: Michael Kerrisk Cc: "Paul E . McKenney" Cc: Paul Turner Cc: Boqun Feng Cc: Josh Triplett Cc: Steven Rostedt Cc: Ben Maurer Cc: Alexander Viro Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski Cc: Andrew Morton Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com

powerpc/syscalls: switch rtas(2) to SYSCALL_DEFINE

2018-05-10T13:25:14Z

Signed-off-by: Al Viro [mpe: Update sys_ni.c for s/ppc_rtas/sys_rtas/] Signed-off-by: Michael Ellerman

aio: implement io_pgetevents

2018-05-02T17:57:24Z

This is the io_getevents equivalent of ppoll/pselect and allows to properly mix signals and aio completions (especially with IOCB_CMD_POLL) and atomically executes the following sequence: sigset_t origmask; pthread_sigmask(SIG_SETMASK, &sigmask, &origmask); ret = io_getevents(ctx, min_nr, nr, events, timeout); pthread_sigmask(SIG_SETMASK, &origmask, NULL); Note that unlike many other signal related calls we do not pass a sigmask size, as that would get us to 7 arguments, which aren't easily supported by the syscall infrastructure. It seems a lot less painful to just add a new syscall variant in the unlikely case we're going to increase the sigset size. Signed-off-by: Christoph Hellwig Reviewed-by: Greg Kroah-Hartman Reviewed-by: Darrick J. Wong

syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls

2018-04-05T14:59:38Z

It may be useful for an architecture to override the definitions of the COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in , in particular to use a different calling convention for syscalls. This patch provides a mechanism to do so, based on the previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled, is included in and may be used to define the macros mentioned above. Moreover, as the syscall calling convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set, the compat syscall function prototypes in are #ifndef'd out in that case. As some of the syscalls and/or compat syscalls may not be present, the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c as well as the SYS_NI() and COMPAT_SYS_NI() macros in kernel/time/posix-stubs.c can be re-defined in iff CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled. Signed-off-by: Dominik Brodowski Acked-by: Linus Torvalds Cc: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.net Signed-off-by: Ingo Molnar

kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions

2018-04-02T18:16:20Z

This keeps it in line with the SYSCALL_DEFINEx() / COMPAT_SYSCALL_DEFINEx() calling convention. Signed-off-by: Dominik Brodowski

kernel/sys_ni: sort cond_syscall() entries

2018-04-02T18:16:19Z

Shuffle the cond_syscall() entries in kernel/sys_ni.c around so that they are kept in the same order as in include/uapi/asm-generic/unistd.h. For better structuring, add the same comments as in that file, but keep a few additional comments and extend the commentary where it seems useful. Signed-off-by: Dominik Brodowski

fs/quota: use COMPAT_SYSCALL_DEFINE for sys32_quotactl()

2018-04-02T18:15:47Z

While sys32_quotactl() is only needed on x86, it can use the recommended COMPAT_SYSCALL_DEFINEx() machinery for its setup. Acked-by: Jan Kara Cc: Christoph Hellwig Signed-off-by: Dominik Brodowski