linux/kernel/trace/ftrace.c, branch v3.8

ftrace: Be first to run code modification on modules

2013-01-21T18:21:50Z

If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] ? __probe_kernel_read+0x46/0x70 [] ? 0xffffffffa017ffff [] ? 0xffffffffa017ffff [] warn_slowpath_null+0x1a/0x20 [] ftrace_bug+0x239/0x280 [] ftrace_process_locs+0x376/0x520 [] ftrace_module_notify+0x47/0x50 [] notifier_call_chain+0x4d/0x70 [] __blocking_notifier_call_chain+0x58/0x80 [] blocking_notifier_call_chain+0x16/0x20 [] sys_init_module+0x73/0x220 [] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org Cc: stable@vger.kernel.org Acked-by: Masami Hiramatsu Reported-by: Frank Ch. Eigler Signed-off-by: Steven Rostedt

lseek: the "whence" argument is called "whence"

2012-12-18T01:15:12Z

But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2012-12-13T20:00:02Z

Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2012-12-12T02:18:58Z

Pull perf fixes from Ingo Molnar: "These are late-v3.7 pending fixes for tracing." Fix up trivial conflict in kernel/trace/ring_buffer.c: the NULL pointer fix clashed with the change of type of the 'ret' variable. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ring-buffer: Fix race between integrity check and readers ring-buffer: Fix NULL pointer if rb_set_head_page() fails ftrace: Clear bits properly in reset_iter_read()

propagate name change to comments in kernel source

2012-12-06T09:39:54Z

I've legally changed my name with New York State, the US Social Security Administration, et al. This patch propagates the name change and change in initials and login to comments in the kernel source as well. Signed-off-by: Nadia Yvette Chambers Signed-off-by: Jiri Kosina

ftrace: Clear bits properly in reset_iter_read()

2012-11-15T21:10:17Z

There is a typo here where '&' is used instead of '|' and it turns the statement into a noop. The original code is equivalent to: iter->flags &= ~((1 << 2) & (1 << 4)); Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain Cc: stable@vger.kernel.org # all of them Signed-off-by: Dan Carpenter Signed-off-by: Steven Rostedt

tracing: Allow tracers to start at core initcall

2012-10-31T20:45:24Z

There's times during debugging that it is helpful to see traces of early boot functions. But the tracers are initialized at device_initcall() which is quite late during the boot process. Setting the kernel command line parameter ftrace=function will not show anything until the function tracer is initialized. This prevents being able to trace functions before device_initcall(). There's no reason that the tracers need to be initialized so late in the boot process. Move them up to core_initcall() as they still need to come after early_initcall() which initializes the tracing buffers. Cc: Thomas Gleixner Signed-off-by: Steven Rostedt

tracing: Replace strict_strto* with kstrto*

2012-10-31T20:45:23Z

* remove old string conversions with kstrto* Link: http://lkml.kernel.org/r/20120926200838.GC1244@0x90.at Signed-off-by: Daniel Walter Signed-off-by: Steven Rostedt

ftrace: add ftrace_set_filter_ip() for address based filter

2012-07-31T14:29:55Z

Add a new filter update interface ftrace_set_filter_ip() to set ftrace filter by ip address, not only glob pattern. Link: http://lkml.kernel.org/r/20120605102808.27845.67952.stgit@localhost.localdomain Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Ananth N Mavinakayanahalli Cc: "Frank Ch. Eigler" Cc: Andrew Morton Cc: Frederic Weisbecker Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt

ftrace: Add selftest to test function trace recursion protection

2012-07-31T14:29:54Z

Add selftests to test the function tracing recursion protection actually does work. It also tests if a ftrace_ops states it will perform its own protection. Although, even if the ftrace_ops states it will protect itself, the ftrace infrastructure may still provide protection if the arch does not support all features or another ftrace_ops is registered. Signed-off-by: Steven Rostedt