linux/kernel/trace/trace.c, branch v3.19

tracing: Remove extra call to init_ftrace_syscalls()

2015-01-15T14:41:11Z

trace_init() calls init_ftrace_syscalls() and then calls trace_event_init() which also calls init_ftrace_syscalls(). It makes more sense to only call it from trace_event_init(). Calling it twice wastes memory, as it allocates the syscall events twice, and loses the first copy of it. Link: http://lkml.kernel.org/r/54AF53BD.5070303@huawei.com Link: http://lkml.kernel.org/r/20150115040505.930398632@goodmis.org Reported-by: Wang Nan Signed-off-by: Steven Rostedt

Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2014-12-16T20:53:59Z

Pull tracing updates from Steven Rostedt: "As the merge window is still open, and this code was not as complex as I thought it might be. I'm pushing this in now. This will allow Thomas to debug his irq work for 3.20. This adds two new features: 1) Allow traceopoints to be enabled right after mm_init(). By passing in the trace_event= kernel command line parameter, tracepoints can be enabled at boot up. For debugging things like the initialization of interrupts, it is needed to have tracepoints enabled very early. People have asked about this before and this has been on my todo list. As it can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm pushing this now. This way he can add tracepoints into the IRQ set up and have users enable them when things go wrong. 2) Have the tracepoints printed via printk() (the console) when they are triggered. If the irq code locks up or reboots the box, having the tracepoint output go into the kernel ring buffer is useless for debugging. But being able to add the tp_printk kernel command line option along with the trace_event= option will have these tracepoints printed as they occur, and that can be really useful for debugging early lock up or reboot problems. This code is not that intrusive and it passed all my tests. Thomas tried them out too and it works for his needs. Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org" * tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add tp_printk cmdline to have tracepoints go to printk() tracing: Move enabling tracepoints to just after rcu_init()

tracing: Add tp_printk cmdline to have tracepoints go to printk()

2014-12-15T15:17:38Z

Add the kernel command line tp_printk option that will have tracepoints that are active sent to printk() as well as to the trace buffer. Passing "tp_printk" will activate this. To turn it off, the sysctl /proc/sys/kernel/tracepoint_printk can have '0' echoed into it. Note, this only works if the cmdline option is used. Echoing 1 into the sysctl file without the cmdline option will have no affect. Note, this is a dangerous option. Having high frequency tracepoints send their data to printk() can possibly cause a live lock. This is another reason why this is only active if the command line option is used. Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos Suggested-by: Thomas Gleixner Tested-by: Thomas Gleixner Acked-by: Thomas Gleixner Signed-off-by: Steven Rostedt

tracing: Move enabling tracepoints to just after rcu_init()

2014-12-15T15:16:50Z

Enabling tracepoints at boot up can be very useful. The tracepoint can be initialized right after RCU has been. There's no need to wait for the early_initcall() to be called. That's too late for some things that can use tracepoints for debugging. Move the logic to enable tracepoints out of the initcalls and into init/main.c to right after rcu_init(). This also allows trace_printk() to be used early too. Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org Reviewed-by: Paul E. McKenney Suggested-by: Thomas Gleixner Tested-by: Thomas Gleixner Acked-by: Thomas Gleixner Signed-off-by: Steven Rostedt

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2014-12-12T18:08:06Z

Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...

Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2014-12-11T04:35:41Z

Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq

Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2014-12-11T03:58:13Z

Pull tracing updates from Steven Rostedt: "There was a lot of clean ups and minor fixes. One of those clean ups was to the trace_seq code. It also removed the return values to the trace_seq_*() functions and use trace_seq_has_overflowed() to see if the buffer filled up or not. This is similar to work being done to the seq_file code as well in another tree. Some of the other goodies include: - Added some "!" (NOT) logic to the tracing filter. - Fixed the frame pointer logic to the x86_64 mcount trampolines - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems. That is, the ftrace trampoline can be dynamically allocated and be called directly by functions that only have a single hook to them" * tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits) tracing: Truncated output is better than nothing tracing: Add additional marks to signal very large time deltas Documentation: describe trace_buf_size parameter more accurately tracing: Allow NOT to filter AND and OR clauses tracing: Add NOT to filtering logic ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter ftrace/x86: Get rid of ftrace_caller_setup ftrace/x86: Have save_mcount_regs macro also save stack frames if needed ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs ftrace/x86: Simplify save_mcount_regs on getting RIP ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file ftrace/x86: Have static tracing also use ftrace_caller_setup ftrace/x86: Have static function tracing always test for function graph kprobes: Add IPMODIFY flag to kprobe_ftrace_ops ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict kprobes/ftrace: Recover original IP if pre_handler doesn't change it tracing/trivial: Fix typos and make an int into a bool tracing: Deletion of an unnecessary check before iput() ...

Merge branch 'iov_iter' into for-next

2014-12-09T01:39:29Z

tracing: Truncated output is better than nothing

2014-12-03T22:10:14Z

The initial reason for this patch is that I noticed that: if (len > TRACE_BUF_SIZE) is off by one. In this code, if len == TRACE_BUF_SIZE, then it means we have truncated the last character off the output string. If we truncate two or more characters then we exit without printing. After some discussion, we decided that printing truncated data is better than not printing at all so we should just use vscnprintf() and remove the test entirely. Also I have updated memcpy() to copy the NUL char instead of setting the NUL in a separate step. Link: http://lkml.kernel.org/r/20141127155752.GA21914@mwanda Signed-off-by: Dan Carpenter Signed-off-by: Steven Rostedt

Merge Linus' tree to be be to apply submitted patches to newer code than

2014-11-20T13:42:02Z

current trivial.git base