linux/kernel/trace/trace_output.c, branch v2.6.35

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2010-05-27T22:23:47Z

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits) tracing: Add __used annotation to event variable perf, trace: Fix !x86 build bug perf report: Support multiple events on the TUI perf annotate: Fix up usage of the build id cache x86/mmiotrace: Remove redundant instruction prefix checks perf annotate: Add TUI interface perf tui: Remove annotate from popup menu after failure perf report: Don't start the TUI if -D is used perf: Fix getline undeclared perf: Optimize perf_tp_event_match() perf: Remove more code from the fastpath perf: Optimize the !vmalloc backed buffer perf: Optimize perf_output_copy() perf: Fix wakeup storm for RO mmap()s perf-record: Share per-cpu buffers perf-record: Remove -M perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2010-05-21T14:19:18Z

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits) [SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline [SCSI] aacraid: prohibit access to array container space [SCSI] aacraid: add support for handling ATA pass-through commands. [SCSI] aacraid: expose physical devices for models with newer firmware [SCSI] aacraid: respond automatically to volumes added by config tool [SCSI] fcoe: fix fcoe module ref counting [SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn [SCSI] libfcoe: Fix incorrect MAC address clearing [SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex [SCSI] libfc: Move the port_id into lport [SCSI] fcoe: move link speed checking into its own routine [SCSI] libfc: Remove extra pointer check [SCSI] libfc: Remove unused fc_get_host_port_type [SCSI] fcoe: fixes wrong error exit in fcoe_create [SCSI] libfc: set seq_id for incoming sequence [SCSI] qla2xxx: Updates to ISP82xx support. [SCSI] qla2xxx: Optionally disable target reset. [SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive [SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did. [SCSI] qla2xxx: T10 DIF support added. ...

tracing: Allow events to share their print functions

2010-05-14T18:20:32Z

Multiple events may use the same method to print their data. Instead of having all events have a pointer to their print funtions, the trace_event structure now points to a trace_event_functions structure that will hold the way to print ouf the event. The event itself is now passed to the print function to let the print function know what kind of event it should print. This opens the door to consolidating the way several events print their output. text data bss dec hex filename 4913961 1088356 861512 6863829 68bbd5 vmlinux.orig 4900382 1048964 861512 6810858 67ecea vmlinux.init 4900446 1049028 861512 6810986 67ed6a vmlinux.preprint This change slightly increases the size but is needed for the next change. v3: Fix the branch tracer events to handle this change. v2: Fix the new function graph tracer event calls to handle this change. Acked-by: Mathieu Desnoyers Acked-by: Masami Hiramatsu Acked-by: Frederic Weisbecker Signed-off-by: Steven Rostedt

tracing: Fix "integer as NULL pointer" warning.

2010-05-05T16:01:26Z

kernel/trace/trace_output.c:256:24: warning: Using plain integer as NULL pointer Signed-off-by: Thiago Farina LKML-Reference: <1264349038-1766-3-git-send-email-tfransosi@gmail.com> Signed-off-by: Steven Rostedt

[SCSI] add scsi trace core functions and put trace points

2010-04-30T17:51:10Z

Signed-off-by: Xiao Guangrong Signed-off-by: Tomohiro Kusumi Signed-off-by: Kei Tokunaga Signed-off-by: James Bottomley

[SCSI] ftrace: add __print_hex()

2010-04-30T17:50:22Z

__print_hex() prints values in an array in hex (w/o '0x') (space separated) EX) 92 33 32 f3 ee 4d Signed-off-by: Li Zefan Signed-off-by: Tomohiro Kusumi Signed-off-by: Kei Tokunaga Acked-by: Steven Rostedt Signed-off-by: James Bottomley

tracing: Add full state to trace_seq

2009-12-09T19:05:49Z

The trace_seq buffer might fill up, and right now one needs to check the return value of each printf into the buffer to check for that. Instead, have the buffer keep track of whether it is full or not, and reject more input if it is full or would have overflowed with an input that wasn't added. Cc: Lai Jiangshan Signed-off-by: Johannes Berg Signed-off-by: Steven Rostedt

tracing: Buffer the output of seq_file in case of filled buffer

2009-12-09T18:55:26Z

If the seq_read fills the buffer it will call s_start again on the next itertation with the same position. This causes a problem with the function_graph tracer because it consumes the iteration in order to determine leaf functions. What happens is that the iterator stores the entry, and the function graph plugin will look at the next entry. If that next entry is a return of the same function and task, then the function is a leaf and the function_graph plugin calls ring_buffer_read which moves the ring buffer iterator forward (the trace iterator still points to the function start entry). The copying of the trace_seq to the seq_file buffer will fail if the seq_file buffer is full. The seq_read will not show this entry. The next read by userspace will cause seq_read to again call s_start which will reuse the trace iterator entry (the function start entry). But the function return entry was already consumed. The function graph plugin will think that this entry is a nested function and not a leaf. To solve this, the trace code now checks the return status of the seq_printf (trace_print_seq). If the writing to the seq_file buffer fails, we set a flag in the iterator (leftover) and we do not reset the trace_seq buffer. On the next call to s_start, we check the leftover flag, and if it is set, we just reuse the trace_seq buffer and do not call into the plugin print functions. Before this patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) | __fsnotify_parent() { 2) 0.540 us | inotify_dentry_parent_queue_event(); After the patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) 0.548 us | __fsnotify_parent(); 2) 0.540 us | inotify_dentry_parent_queue_event(); [ Updated the patch to fix a missing return 0 from the trace_print_seq() stub when CONFIG_TRACING is disabled. Reported-by: Ingo Molnar ] Reported-by: Jiri Olsa Cc: Frederic Weisbecker Signed-off-by: Steven Rostedt

tracing: Fix trace_seq_printf() return value

2009-10-24T09:07:50Z

trace_seq_printf() return value is a little ambiguous. It currently returns the length of the space available in the buffer. printf usually returns the amount written. This is not adequate here, because: trace_seq_printf(s, ""); is perfectly legal, and returning 0 would indicate that it failed. We can always see the amount written by looking at the before and after values of s->len. This is not quite the same use as printf. We only care if the string was successfully written to the buffer or not. Make trace_seq_printf() return 0 if the trace oversizes the buffer's free space, 1 otherwise. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.631787612@goodmis.org> Signed-off-by: Ingo Molnar

tracing: fix transposed numbers of lock_depth and preempt_count

2009-10-07T18:05:04Z

The lock_depth and preempt_count numbers in the latency format is transposed. Signed-off-by: Steven Rostedt