linux/lib/Kconfig, branch v5.14

lib/test_string.c: move string selftest in the Runtime Testing menu

2021-07-30T17:14:39Z

STRING_SELFTEST is presented in the "Library routines" menu. Move it in Kernel hacking > Kernel Testing and Coverage > Runtime Testing together with other similar tests found in lib/ --- Runtime Testing <*> Test functions located in the hexdump module at runtime <*> Test string functions (NEW) <*> Test functions located in the string_helpers module at runtime <*> Test strscpy*() family of functions at runtime <*> Test kstrto*() family of functions at runtime <*> Test printf() family of functions at runtime <*> Test scanf() family of functions at runtime Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.com Signed-off-by: Matteo Croce Cc: Peter Rosin Cc: Geert Uytterhoeven Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

lib: add iomem emulation (logic_iomem)

2021-06-17T19:44:51Z

Add IO memory emulation that uses callbacks for read/write to the allocated regions. The callbacks can be registered by the users using logic_iomem_alloc(). To use, an architecture must 'select LOGIC_IOMEM' in Kconfig and then include into asm/io.h to get the __raw_read*/__raw_write* functions. Optionally, an architecture may 'select LOGIC_IOMEM_FALLBACK' in which case non-emulated regions will 'fall back' to the various real_* functions that must then be provided. Cc: Arnd Bergmann Signed-off-by: Johannes Berg Signed-off-by: Richard Weinberger

lib: Add ASN.1 encoder

2021-04-14T13:30:30Z

We have a need in the TPM2 trusted keys to return the ASN.1 form of the TPM key blob so it can be operated on by tools outside of the kernel. The specific tools are the openssl_tpm2_engine, openconnect and the Intel tpm2-tss-engine. To do that, we have to be able to read and write the same binary key format the tools use. The current ASN.1 decoder does fine for reading, but we need pieces of an ASN.1 encoder to write the key blob in binary compatible form. For backwards compatibility, the trusted key reader code will still accept the two TPM2B quantities that it uses today, but the writer will only output the ASN.1 form. The current implementation only encodes the ASN.1 bits we actually need. Signed-off-by: James Bottomley Reviewed-by: David Howells Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

lib: stackdepot: add support to configure STACK_HASH_SIZE

2021-02-26T17:41:04Z

Use CONFIG_STACK_HASH_ORDER to configure STACK_HASH_SIZE. Aim is to have configurable value for STACK_HASH_SIZE, so depend on use case one can configure it. One example is of Page Owner, CONFIG_PAGE_OWNER works only if page_owner=on via kernel parameter on CONFIG_PAGE_OWNER configured system. Thus, unless admin enable it via command line option, the stackdepot will just waste 8M memory without any customer. Making it configurable and use lower value helps to enable features like CONFIG_PAGE_OWNER without any significant overhead. Link: https://lkml.kernel.org/r/1611749198-24316-1-git-send-email-vjitta@codeaurora.org Signed-off-by: Yogesh Lal Signed-off-by: Vinayak Menon Signed-off-by: Vijayanand Jitta Reviewed-by: Minchan Kim Reviewed-by: Alexander Potapenko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Add and use a generic version of devmem_is_allowed()

2020-12-11T20:30:26Z

As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed()

lib: Add a generic version of devmem_is_allowed()

2020-12-11T20:28:08Z

As part of adding support for STRICT_DEVMEM to the RISC-V port, Zong provided a devmem_is_allowed() implementation that's exactly the same as all the others I checked. Instead I'm adding a generic version, which will soon be used. Reviewed-by: Luis Chamberlain Signed-off-by: Palmer Dabbelt

x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()

2020-10-06T09:18:04Z

In reaction to a proposal to introduce a memcpy_mcsafe_fast() implementation Linus points out that memcpy_mcsafe() is poorly named relative to communicating the scope of the interface. Specifically what addresses are valid to pass as source, destination, and what faults / exceptions are handled. Of particular concern is that even though x86 might be able to handle the semantics of copy_mc_to_user() with its common copy_user_generic() implementation other archs likely need / want an explicit path for this case: On Fri, May 1, 2020 at 11:28 AM Linus Torvalds wrote: > > On Thu, Apr 30, 2020 at 6:21 PM Dan Williams wrote: > > > > However now I see that copy_user_generic() works for the wrong reason. > > It works because the exception on the source address due to poison > > looks no different than a write fault on the user address to the > > caller, it's still just a short copy. So it makes copy_to_user() work > > for the wrong reason relative to the name. > > Right. > > And it won't work that way on other architectures. On x86, we have a > generic function that can take faults on either side, and we use it > for both cases (and for the "in_user" case too), but that's an > artifact of the architecture oddity. > > In fact, it's probably wrong even on x86 - because it can hide bugs - > but writing those things is painful enough that everybody prefers > having just one function. Replace a single top-level memcpy_mcsafe() with either copy_mc_to_user(), or copy_mc_to_kernel(). Introduce an x86 copy_mc_fragile() name as the rename for the low-level x86 implementation formerly named memcpy_mcsafe(). It is used as the slow / careful backend that is supplanted by a fast copy_mc_generic() in a follow-on patch. One side-effect of this reorganization is that separating copy_mc_64.S to its own file means that perf no longer needs to track dependencies for its memcpy_64.S benchmarks. [ bp: Massage a bit. ] Signed-off-by: Dan Williams Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Acked-by: Michael Ellerman Cc: Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21Z

Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...

lib: Add zstd support to decompress

2020-07-31T09:49:08Z

- Add unzstd() and the zstd decompress interface. - Add zstd support to decompress_method(). The decompress_method() and unzstd() functions are used to decompress the initramfs and the initrd. The __decompress() function is used in the preboot environment to decompress a zstd compressed kernel. The zstd decompression function allows the input and output buffers to overlap because that is used by x86 kernel decompression. Signed-off-by: Nick Terrell Signed-off-by: Ingo Molnar Tested-by: Sedat Dilek Reviewed-by: Kees Cook Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com

Add pldmfw library for PLDM firmware update

2020-07-29T00:07:06Z

The pldmfw library is used to implement common logic needed to flash devices based on firmware files using the format described by the PLDM for Firmware Update standard. This library consists of logic to parse the PLDM file format from a firmware file object, as well as common logic for sending the relevant PLDM header data to the device firmware. A simple ops table is provided so that device drivers can implement device specific hardware interactions while keeping the common logic to the pldmfw library. This library will be used by the Intel ice networking driver as part of implementing device flash update via devlink. The library aims to be vendor and device agnostic. For this reason, it has been placed in lib/pldmfw, in the hopes that other devices which use the PLDM firmware file format may benefit from it in the future. However, do note that not all features defined in the PLDM standard have been implemented. Signed-off-by: Jacob Keller Signed-off-by: David S. Miller