<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux/lib/Makefile, branch v5.5</title>
<subtitle>Mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
</subtitle>
<id>https://git.shady.money/linux/atom?h=v5.5</id>
<link rel='self' href='https://git.shady.money/linux/atom?h=v5.5'/>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/'/>
<updated>2019-12-05T19:43:31Z</updated>
<entry>
<title>Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc</title>
<updated>2019-12-05T19:43:31Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-12-05T19:43:31Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1'/>
<id>urn:sha1:ec939e4c94bd3ef2fd4f34c15f8aaf79bd0c5ee1</id>
<content type='text'>
Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...
</content>
</entry>
<entry>
<title>Merge tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm</title>
<updated>2019-11-27T03:25:25Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-11-27T03:25:25Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=6e9f879684b46331f51d0c76ebee981c788417db'/>
<id>urn:sha1:6e9f879684b46331f51d0c76ebee981c788417db</id>
<content type='text'>
Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20191018, add support for EFI specific purpose memory, update the ACPI
  EC driver to make it work on systems with hardware-reduced ACPI,
  improve ACPI-based device enumeration for some platforms, rework the
  lid blacklist handling in the button driver and add more lid quirks to
  it, unify ACPI _HID/_UID matching, fix assorted issues and clean up
  the code and documentation.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20191018
     including:
      * Fixes for Clang warnings (Bob Moore)
      * Fix for possible overflow in get_tick_count() (Bob Moore)
      * Introduction of acpi_unload_table() (Bob Moore)
      * Debugger and utilities updates (Erik Schmauss)
      * Fix for unloading tables loaded via configfs (Nikolaus Voss)

   - Add support for EFI specific purpose memory to optionally allow
     either application-exclusive or core-kernel-mm managed access to
     differentiated memory (Dan Williams)

   - Fix and clean up processing of the HMAT table (Brice Goglin, Qian
     Cai, Tao Xu)

   - Update the ACPI EC driver to make it work on systems with
     hardware-reduced ACPI (Daniel Drake)

   - Always build in support for the Generic Event Device (GED) to allow
     one kernel binary to work both on systems with full hardware ACPI
     and hardware-reduced ACPI (Arjan van de Ven)

   - Fix the table unload mechanism to unregister platform devices
     created when the given table was loaded (Andy Shevchenko)

   - Rework the lid blacklist handling in the button driver and add more
     lid quirks to it (Hans de Goede)

   - Improve ACPI-based device enumeration for some platforms based on
     Intel BayTrail SoCs (Hans de Goede)

   - Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and
     prevent handlers from being registered for unhandled PMIC OpRegions
     (Hans de Goede)

   - Unify ACPI _HID/_UID matching (Andy Shevchenko)

   - Clean up documentation and comments (Cao jin, James Pack, Kacper
     Piwiński)"

* tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  ACPI: OSI: Shoot duplicate word
  ACPI: HMAT: use %u instead of %d to print u32 values
  ACPI: NUMA: HMAT: fix a section mismatch
  ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm
  ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device
  ACPI: NUMA: HMAT: Register HMAT at device_initcall level
  device-dax: Add a driver for "hmem" devices
  dax: Fix alloc_dax_region() compile warning
  lib: Uplevel the pmem "region" ida to a global allocator
  x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
  arm/efi: EFI soft reservation to memblock
  x86/efi: EFI soft reservation to E820 enumeration
  efi: Common enable/disable infrastructure for EFI soft reservation
  x86/efi: Push EFI_MEMMAP check into leaf routines
  efi: Enumerate EFI_MEMORY_SP
  ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
  ACPICA: Update version to 20191018
  ACPICA: debugger: remove leading whitespaces when converting a string to a buffer
  ACPICA: acpiexec: initialize all simple types and field units from user input
  ACPICA: debugger: add field unit support for acpi_db_get_next_token
  ...
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6</title>
<updated>2019-11-26T03:49:58Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-11-26T03:49:58Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=642356cb5f4a8c82b5ca5ebac288c327d10df236'/>
<id>urn:sha1:642356cb5f4a8c82b5ca5ebac288c327d10df236</id>
<content type='text'>
Pull crypto updates from Herbert Xu:
 "API:
   - Add library interfaces of certain crypto algorithms for WireGuard
   - Remove the obsolete ablkcipher and blkcipher interfaces
   - Move add_early_randomness() out of rng_mutex

  Algorithms:
   - Add blake2b shash algorithm
   - Add blake2s shash algorithm
   - Add curve25519 kpp algorithm
   - Implement 4 way interleave in arm64/gcm-ce
   - Implement ciphertext stealing in powerpc/spe-xts
   - Add Eric Biggers's scalar accelerated ChaCha code for ARM
   - Add accelerated 32r2 code from Zinc for MIPS
   - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS

  Drivers:
   - Fix entropy reading failures in ks-sa
   - Add support for sam9x60 in atmel
   - Add crypto accelerator for amlogic GXL
   - Add sun8i-ce Crypto Engine
   - Add sun8i-ss cryptographic offloader
   - Add a host of algorithms to inside-secure
   - Add NPCM RNG driver
   - add HiSilicon HPRE accelerator
   - Add HiSilicon TRNG driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits)
  crypto: vmx - Avoid weird build failures
  crypto: lib/chacha20poly1305 - use chacha20_crypt()
  crypto: x86/chacha - only unregister algorithms if registered
  crypto: chacha_generic - remove unnecessary setkey() functions
  crypto: amlogic - enable working on big endian kernel
  crypto: sun8i-ce - enable working on big endian
  crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
  hwrng: ks-sa - Enable COMPILE_TEST
  crypto: essiv - remove redundant null pointer check before kfree
  crypto: atmel-aes - Change data type for "lastc" buffer
  crypto: atmel-tdes - Set the IV after {en,de}crypt
  crypto: sun4i-ss - fix big endian issues
  crypto: sun4i-ss - hide the Invalid keylen message
  crypto: sun4i-ss - use crypto_ahash_digestsize
  crypto: sun4i-ss - remove dependency on not 64BIT
  crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
  MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
  crypto: hisilicon - add DebugFS for HiSilicon SEC
  Documentation: add DebugFS doc for HiSilicon SEC
  crypto: hisilicon - add SRIOV for HiSilicon SEC
  ...
</content>
</entry>
<entry>
<title>Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk</title>
<updated>2019-11-26T03:40:40Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-11-26T03:40:40Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=436b2a8039ac00f8dc6ae8f3bd2be83748f72312'/>
<id>urn:sha1:436b2a8039ac00f8dc6ae8f3bd2be83748f72312</id>
<content type='text'>
Pull printk updates from Petr Mladek:

 - Allow to print symbolic error names via new %pe modifier.

 - Use pr_warn() instead of the remaining pr_warning() calls. Fix
   formatting of the related lines.

 - Add VSPRINTF entry to MAINTAINERS.

* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
  checkpatch: don't warn about new vsprintf pointer extension '%pe'
  MAINTAINERS: Add VSPRINTF
  tools lib api: Renaming pr_warning to pr_warn
  ASoC: samsung: Use pr_warn instead of pr_warning
  lib: cpu_rmap: Use pr_warn instead of pr_warning
  trace: Use pr_warn instead of pr_warning
  dma-debug: Use pr_warn instead of pr_warning
  vgacon: Use pr_warn instead of pr_warning
  fs: afs: Use pr_warn instead of pr_warning
  sh/intc: Use pr_warn instead of pr_warning
  scsi: Use pr_warn instead of pr_warning
  platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
  platform/x86: asus-laptop: Use pr_warn instead of pr_warning
  platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
  oprofile: Use pr_warn instead of pr_warning
  of: Use pr_warn instead of pr_warning
  macintosh: Use pr_warn instead of pr_warning
  idsn: Use pr_warn instead of pr_warning
  ide: Use pr_warn instead of pr_warning
  crypto: n2: Use pr_warn instead of pr_warning
  ...
</content>
</entry>
<entry>
<title>crypto: chacha - move existing library code into lib/crypto</title>
<updated>2019-11-17T01:02:39Z</updated>
<author>
<name>Ard Biesheuvel</name>
<email>ardb@kernel.org</email>
</author>
<published>2019-11-08T12:22:08Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=5fb8ef25803ef33e2eb60b626435828b937bed75'/>
<id>urn:sha1:5fb8ef25803ef33e2eb60b626435828b937bed75</id>
<content type='text'>
Currently, our generic ChaCha implementation consists of a permute
function in lib/chacha.c that operates on the 64-byte ChaCha state
directly [and which is always included into the core kernel since it
is used by the /dev/random driver], and the crypto API plumbing to
expose it as a skcipher.

In order to support in-kernel users that need the ChaCha streamcipher
but have no need [or tolerance] for going through the abstractions of
the crypto API, let's expose the streamcipher bits via a library API
as well, in a way that permits the implementation to be superseded by
an architecture specific one if provided.

So move the streamcipher code into a separate module in lib/crypto,
and expose the init() and crypt() routines to users of the library.

Signed-off-by: Ard Biesheuvel &lt;ardb@kernel.org&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
</content>
</entry>
<entry>
<title>lib: Uplevel the pmem "region" ida to a global allocator</title>
<updated>2019-11-07T14:44:29Z</updated>
<author>
<name>Dan Williams</name>
<email>dan.j.williams@intel.com</email>
</author>
<published>2019-11-07T01:43:31Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=33dd70752cd76f4d883a165a674f13121a4155ed'/>
<id>urn:sha1:33dd70752cd76f4d883a165a674f13121a4155ed</id>
<content type='text'>
In preparation for handling platform differentiated memory types beyond
persistent memory, uplevel the "region" identifier to a global number
space. This enables a device-dax instance to be registered to any memory
type with guaranteed unique names.

Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
</content>
</entry>
<entry>
<title>logic_pio: Build into a library</title>
<updated>2019-11-05T00:48:07Z</updated>
<author>
<name>John Garry</name>
<email>john.garry@huawei.com</email>
</author>
<published>2019-11-04T17:22:19Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=f361c863b3bfa602da37d7a94d90a5dfee0d08fe'/>
<id>urn:sha1:f361c863b3bfa602da37d7a94d90a5dfee0d08fe</id>
<content type='text'>
Object file logic_pio.o is always built.

Ideally the object file should only be built when required. This is
tricky, as that would be for archs which define PCI_IOBASE, but no common
config option exists for that.

For now, continue to always build but at least ensure the symbols are not
included in the vmlinux when not referenced.

Suggested-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: John Garry &lt;john.garry@huawei.com&gt;
Signed-off-by: Wei Xu &lt;xuwei5@hisilicon.com&gt;
</content>
</entry>
<entry>
<title>lib/list-test: add a test for the 'list' doubly linked list</title>
<updated>2019-11-01T17:13:48Z</updated>
<author>
<name>David Gow</name>
<email>davidgow@google.com</email>
</author>
<published>2019-10-24T22:46:31Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=ea2dd7c0875ed31955cda7b1b20612c8337192e5'/>
<id>urn:sha1:ea2dd7c0875ed31955cda7b1b20612c8337192e5</id>
<content type='text'>
Add a KUnit test for the kernel doubly linked list implementation in
include/linux/list.h

Each test case (list_test_x) is focused on testing the behaviour of the
list function/macro 'x'. None of the tests pass invalid lists to these
macros, and so should behave identically with DEBUG_LIST enabled and
disabled.

Note that, at present, it only tests the list_ types (not the
singly-linked hlist_), and does not yet test all of the
list_for_each_entry* macros (and some related things like
list_prepare_entry).

Ignoring checkpatch.pl spurious errors related to its handling of for_each
and other list macros. checkpatch.pl expects anything with for_each in its
name to be a loop and expects that the open brace is placed on the same
line as for a for loop. In this case, test case naming scheme includes
name of the macro it is testing, which results in the spurious errors.
Commit message updated by Shuah Khan &lt;skhan@linuxfoundation.org&gt;

Signed-off-by: David Gow &lt;davidgow@google.com&gt;
Reviewed-by: Brendan Higgins &lt;brendanhiggins@google.com&gt;
Tested-by: Brendan Higgins &lt;brendanhiggins@google.com&gt;
Signed-off-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>printf: add support for printing symbolic error names</title>
<updated>2019-10-17T14:23:25Z</updated>
<author>
<name>Rasmus Villemoes</name>
<email>linux@rasmusvillemoes.dk</email>
</author>
<published>2019-10-15T19:07:05Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=57f5677e535ba24b8926a7125be2ef8d7f09323c'/>
<id>urn:sha1:57f5677e535ba24b8926a7125be2ef8d7f09323c</id>
<content type='text'>
It has been suggested several times to extend vsnprintf() to be able
to convert the numeric value of ENOSPC to print "ENOSPC". This
implements that as a %p extension: With %pe, one can do

  if (IS_ERR(foo)) {
    pr_err("Sorry, can't do that: %pe\n", foo);
    return PTR_ERR(foo);
  }

instead of what is seen in quite a few places in the kernel:

  if (IS_ERR(foo)) {
    pr_err("Sorry, can't do that: %ld\n", PTR_ERR(foo));
    return PTR_ERR(foo);
  }

If the value passed to %pe is an ERR_PTR, but the library function
errname() added here doesn't know about the value, the value is simply
printed in decimal. If the value passed to %pe is not an ERR_PTR, we
treat it as an ordinary %p and thus print the hashed value (passing
non-ERR_PTR values to %pe indicates a bug in the caller, but we can't
do much about that).

With my embedded hat on, and because it's not very invasive to do,
I've made it possible to remove this. The errname() function and
associated lookup tables take up about 3K. For most, that's probably
quite acceptable and a price worth paying for more readable
dmesg (once this starts getting used), while for those that disable
printk() it's of very little use - I don't see a
procfs/sysfs/seq_printf() file reasonably making use of this - and
they clearly want to squeeze vmlinux as much as possible. Hence the
default y if PRINTK.

The symbols to include have been found by massaging the output of

  find arch include -iname 'errno*.h' | xargs grep -E 'define\s*E'

In the cases where some common aliasing exists
(e.g. EAGAIN=EWOULDBLOCK on all platforms, EDEADLOCK=EDEADLK on most),
I've moved the more popular one (in terms of 'git grep -w Efoo | wc)
to the bottom so that one takes precedence.

Link: http://lkml.kernel.org/r/20191015190706.15989-1-linux@rasmusvillemoes.dk
To: "Jonathan Corbet" &lt;corbet@lwn.net&gt;
To: linux-kernel@vger.kernel.org
Cc: "Andy Shevchenko" &lt;andy.shevchenko@gmail.com&gt;
Cc: "Andrew Morton" &lt;akpm@linux-foundation.org&gt;
Cc: "Joe Perches" &lt;joe@perches.com&gt;
Cc: linux-doc@vger.kernel.org
Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Acked-by: Uwe Kleine-König &lt;uwe@kleine-koenig.org&gt;
Reviewed-by: Petr Mladek &lt;pmladek@suse.com&gt;
[andy.shevchenko@gmail.com: use abs()]
Acked-by: Andy Shevchenko &lt;andy.shevchenko@gmail.com&gt;
Signed-off-by: Petr Mladek &lt;pmladek@suse.com&gt;
</content>
</entry>
<entry>
<title>lib: enable building KUnit in lib/</title>
<updated>2019-09-30T23:35:00Z</updated>
<author>
<name>Brendan Higgins</name>
<email>brendanhiggins@google.com</email>
</author>
<published>2019-09-23T09:02:36Z</published>
<link rel='alternate' type='text/html' href='https://git.shady.money/linux/commit/?id=84bc809eecf37f3bd3ee7d2002b2528787a11cb1'/>
<id>urn:sha1:84bc809eecf37f3bd3ee7d2002b2528787a11cb1</id>
<content type='text'>
KUnit is a new unit testing framework for the kernel and when used is
built into the kernel as a part of it. Add KUnit to the lib Kconfig and
Makefile to allow it to be actually built.

Signed-off-by: Brendan Higgins &lt;brendanhiggins@google.com&gt;
Cc: Randy Dunlap &lt;rdunlap@infradead.org&gt;
Cc: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Cc: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Cc: Kees Cook &lt;keescook@chromium.org&gt;
Reviewed-by: Stephen Boyd &lt;sboyd@kernel.org&gt;
Signed-off-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
</content>
</entry>
</feed>
