linux/lib/kunit/test.c, branch v6.4

kunit: fix bug of extra newline characters in debugfs logs

2023-03-10T20:59:43Z

Fix bug of the extra newline characters in debugfs logs. When a line is added to debugfs with a newline character at the end, an extra line appears in the debugfs log. This is due to a discrepancy between how the lines are printed and how they are added to the logs. Remove this discrepancy by checking if a newline character is present before adding a newline character. This should closely match the printk behavior. Add kunit_log_newline_test to provide test coverage for this issue. (Also, move kunit_log_test above suite definition to remove the unnecessary declaration prior to the suite definition) As an example, say we add these two lines to the log: kunit_log(..., "KTAP version 1\n"); kunit_log(..., "1..1"); The debugfs log before this fix: KTAP version 1 1..1 The debugfs log after this fix: KTAP version 1 1..1 Signed-off-by: Rae Moar Reviewed-by: David Gow Signed-off-by: Shuah Khan

kunit: fix bug in the order of lines in debugfs logs

2023-03-10T20:59:38Z

Fix bug in debugfs logs that causes an incorrect order of lines in the debugfs log. Currently, the test counts lines that show the number of tests passed, failed, and skipped, as well as any suite diagnostic lines, appear prior to the individual results, which is a bug. Ensure the order of printing for the debugfs log is correct. Additionally, add a KTAP header to so the debugfs logs can be valid KTAP. This is an example of a log prior to these fixes: KTAP version 1 # Subtest: kunit_status 1..2 # kunit_status: pass:2 fail:0 skip:0 total:2 # Totals: pass:2 fail:0 skip:0 total:2 ok 1 kunit_status_set_failure_test ok 2 kunit_status_mark_skipped_test ok 1 kunit_status Note the two lines with stats are out of order. This is the same debugfs log after the fixes (in combination with the third patch to remove the extra line): KTAP version 1 1..1 KTAP version 1 # Subtest: kunit_status 1..2 ok 1 kunit_status_set_failure_test ok 2 kunit_status_mark_skipped_test # kunit_status: pass:2 fail:0 skip:0 total:2 # Totals: pass:2 fail:0 skip:0 total:2 ok 1 kunit_status Signed-off-by: Rae Moar Reviewed-by: David Gow Signed-off-by: Shuah Khan

kunit: fix bug in debugfs logs of parameterized tests

2023-03-10T20:59:32Z

Fix bug in debugfs logs that causes individual parameterized results to not appear because the log is reinitialized (cleared) when each parameter is run. Ensure these results appear in the debugfs logs, increase log size to allow for the size of parameterized results. As a result, append lines to the log directly rather than using an intermediate variable that can cause stack size warnings due to the increased log size. Here is the debugfs log of ext4_inode_test which uses parameterized tests before the fix: KTAP version 1 # Subtest: ext4_inode_test 1..1 # Totals: pass:16 fail:0 skip:0 total:16 ok 1 ext4_inode_test As you can see, this log does not include any of the individual parametrized results. After (in combination with the next two fixes to remove extra empty line and ensure KTAP valid format): KTAP version 1 1..1 KTAP version 1 # Subtest: ext4_inode_test 1..1 KTAP version 1 # Subtest: inode_test_xtimestamp_decoding ok 1 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits ... (the rest of the individual parameterized tests) ok 16 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra # inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16 ok 1 inode_test_xtimestamp_decoding # Totals: pass:16 fail:0 skip:0 total:16 ok 1 ext4_inode_test Signed-off-by: Rae Moar Reviewed-by: David Gow Signed-off-by: Shuah Khan

kunit: Add printf attribute to fail_current_test_impl

2023-02-09T01:08:14Z

Add the gnu_printf (__printf()) attribute to the kunit_fail_current_test() implementation in __kunit_fail_current_test_impl(). While it's not actually useful here, as this function is never called directly, it nevertheless was triggering -Wsuggest-attribute=format warnings, so we should add it to reduce the noise. Fixes: cc3ed2fe5c93 ("kunit: Add "hooks" to call into KUnit when it's built as a module") Reported-by: kernel test robot Signed-off-by: David Gow Reviewed-by: Rae Moar Signed-off-by: Shuah Khan

kunit: Add "hooks" to call into KUnit when it's built as a module

2023-02-08T21:26:25Z

KUnit has several macros and functions intended for use from non-test code. These hooks, currently the kunit_get_current_test() and kunit_fail_current_test() macros, didn't work when CONFIG_KUNIT=m. In order to support this case, the required functions and static data need to be available unconditionally, even when KUnit itself is not built-in. The new 'hooks.c' file is therefore always included, and has both the static key required for kunit_get_current_test(), and a table of function pointers in struct kunit_hooks_table. This is filled in with the real implementations by kunit_install_hooks(), which is kept in hooks-impl.h and called when the kunit module is loaded. This can be extended for future features which require similar "hook" behaviour, such as static stubs, by simply adding new entries to the struct, and the appropriate code to set them. Fixed white-space errors during commit: Shuah Khan Resolved merge conflicts with: db105c37a4d6 ("kunit: Export kunit_running()") This patch supersedes the above. Shuah Khan Signed-off-by: David Gow Reviewed-by: Rae Moar Reviewed-by: Brendan Higgins Signed-off-by: Shuah Khan

kunit: Export kunit_running()

2023-01-20T17:03:04Z

Using kunit_fail_current_test() in a loadable module causes a link error like: ERROR: modpost: "kunit_running" [drivers/gpu/drm/vc4/vc4.ko] undefined! Export the symbol to allow using it from modules. Fixes: da43ff045c3f ("drm/vc4: tests: Fail the current test if we access a register") Signed-off-by: Arnd Bergmann Reviewed-by: David Gow Signed-off-by: Shuah Khan

Merge tag 'linux-kselftest-kunit-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2022-12-13T00:42:57Z

Pull KUnit updates from Shuah Khan: "Several enhancements, fixes, clean-ups, documentation updates, improvements to logging and KTAP compliance of KUnit test output: - log numbers in decimal and hex - parse KTAP compliant test output - allow conditionally exposing static symbols to tests when KUNIT is enabled - make static symbols visible during kunit testing - clean-ups to remove unused structure definition" * tag 'linux-kselftest-kunit-next-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: dev-tools: Clarify requirements for result description apparmor: test: make static symbols visible during kunit testing kunit: add macro to allow conditionally exposing static symbols to tests kunit: tool: make parser preserve whitespace when printing test log Documentation: kunit: Fix "How Do I Use This" / "Next Steps" sections kunit: tool: don't include KTAP headers and the like in the test log kunit: improve KTAP compliance of KUnit test output kunit: tool: parse KTAP compliant test output mm: slub: test: Use the kunit_get_current_test() function kunit: Use the static key when retrieving the current test kunit: Provide a static key to check if KUnit is actively running tests kunit: tool: make --json do nothing if --raw_ouput is set kunit: tool: tweak error message when no KTAP found kunit: remove KUNIT_INIT_MEM_ASSERTION macro Documentation: kunit: Remove redundant 'tips.rst' page Documentation: KUnit: reword description of assertions Documentation: KUnit: make usage.rst a superset of tips.rst, remove duplication kunit: eliminate KUNIT_INIT_*_ASSERT_STRUCT macros kunit: tool: remove redundant file.close() call in unit test kunit: tool: unit tests all check parser errors, standardize formatting a bit ...

kunit: improve KTAP compliance of KUnit test output

2022-12-12T21:13:47Z

Change KUnit test output to better comply with KTAP v1 specifications found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html. 1) Use "KTAP version 1" instead of "TAP version 14" as test output header 2) Remove '-' between test number and test name on test result lines 2) Add KTAP version lines to each subtest header as well Note that the new KUnit output still includes the “# Subtest” line now located after the KTAP version line. This does not completely match the KTAP v1 spec but since it is classified as a diagnostic line, it is not expected to be disruptive or break any existing parsers. This “# Subtest” line comes from the TAP 14 spec (https://testanything.org/tap-version-14-specification.html) and it is used to define the test name before the results. Original output: TAP version 14 1..1 # Subtest: kunit-test-suite 1..3 ok 1 - kunit_test_1 ok 2 - kunit_test_2 ok 3 - kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 - kunit-test-suite New output: KTAP version 1 1..1 KTAP version 1 # Subtest: kunit-test-suite 1..3 ok 1 kunit_test_1 ok 2 kunit_test_2 ok 3 kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 kunit-test-suite Signed-off-by: Rae Moar Reviewed-by: Daniel Latypov Reviewed-by: David Gow Tested-by: Anders Roxell Signed-off-by: Shuah Khan

kunit: Provide a static key to check if KUnit is actively running tests

2022-12-12T21:13:47Z

KUnit does a few expensive things when enabled. This hasn't been a problem because KUnit was only enabled on test kernels, but with a few people enabling (but not _using_) KUnit on production systems, we need a runtime way of handling this. Provide a 'kunit_running' static key (defaulting to false), which allows us to hide any KUnit code behind a static branch. This should reduce the performance impact (on other code) of having KUnit enabled to a single NOP when no tests are running. Note that, while it looks unintuitive, tests always run entirely within __kunit_test_suites_init(), so it's safe to decrement the static key at the end of this function, rather than in __kunit_test_suites_exit(), which is only there to clean up results in debugfs. Signed-off-by: David Gow Reviewed-by: Daniel Latypov Signed-off-by: Shuah Khan

kunit: update NULL vs IS_ERR() tests

2022-10-18T21:08:42Z

The alloc_string_stream() functions were changed from returning NULL on error to returning error pointers so these caller needs to be updated as well. Fixes: 78b1c6584fce ("kunit: string-stream: Simplify resource use") Signed-off-by: Dan Carpenter Reviewed-by: Daniel Latypov Reviewed-by: David Gow Signed-off-by: Shuah Khan