linux/lib/test_bpf.c, branch v5.10

bpf: revert "test_bpf: Flag tests that cannot be jited on s390"

2020-07-16T18:52:43Z

This reverts commit 3203c9010060 ("test_bpf: flag tests that cannot be jited on s390"). The s390 bpf JIT previously had a restriction on the maximum program size, which required some tests in test_bpf to be flagged as expected failures. The program size limitation has been removed, and the tests now pass, so these tests should no longer be flagged. Fixes: d1242b10ff03 ("s390/bpf: Remove JITed image size limitations") Signed-off-by: Seth Forshee Signed-off-by: Daniel Borkmann Reviewed-by: Ilya Leoshkevich Link: https://lore.kernel.org/bpf/20200716143931.330122-1-seth.forshee@canonical.com

bpf/tests: Use migrate disable instead of preempt disable

2020-02-25T00:20:09Z

Replace the preemption disable/enable with migrate_disable/enable() to reflect the actual requirement and to allow PREEMPT_RT to substitute it with an actual migration disable mechanism which does not disable preemption. [ tglx: Switched it over to migrate disable ] Signed-off-by: David S. Miller Signed-off-by: Thomas Gleixner Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200224145643.785306549@linutronix.de

bpf, testing: Introduce 'gso_linear_no_head_frag' skb_segment test

2019-10-30T15:37:08Z

Following reports of skb_segment() hitting a BUG_ON when working on GROed skbs which have their gso_size mangled (e.g. after a bpf_skb_change_proto call), add a reproducer test that mimics the input skbs that lead to the mentioned BUG_ON as in [1] and validates the fix submitted in [2]. [1] https://lists.openwall.net/netdev/2019/08/26/110 [2] commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") Signed-off-by: Shmulik Ladkani Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20191025134223.2761-3-shmulik.ladkani@gmail.com

bpf, testing: Refactor test_skb_segment() for testing skb_segment() on different skbs

2019-10-30T15:37:01Z

Currently, test_skb_segment() builds a single test skb and runs skb_segment() on it. Extend test_skb_segment() so it processes an array of numerous skb/feature pairs to test. Signed-off-by: Shmulik Ladkani Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20191025134223.2761-2-shmulik.ladkani@gmail.com

test_bpf: Fix a new clang warning about xor-ing two numbers

2019-08-20T15:07:29Z

r369217 in clang added a new warning about potential misuse of the xor operator as an exponentiation operator: ../lib/test_bpf.c:870:13: warning: result of '10 ^ 300' is 294; did you mean '1e300'? [-Wxor-used-as-pow] { { 4, 10 ^ 300 }, { 20, 10 ^ 300 } }, ~~~^~~~~ 1e300 ../lib/test_bpf.c:870:13: note: replace expression with '0xA ^ 300' to silence this warning ../lib/test_bpf.c:870:31: warning: result of '10 ^ 300' is 294; did you mean '1e300'? [-Wxor-used-as-pow] { { 4, 10 ^ 300 }, { 20, 10 ^ 300 } }, ~~~^~~~~ 1e300 ../lib/test_bpf.c:870:31: note: replace expression with '0xA ^ 300' to silence this warning The commit link for this new warning has some good logic behind wanting to add it but this instance appears to be a false positive. Adopt its suggestion to silence the warning but not change the code. According to the differential review link in the clang commit, GCC may eventually adopt this warning as well. Link: https://github.com/ClangBuiltLinux/linux/issues/643 Link: https://github.com/llvm/llvm-project/commit/920890e26812f808a74c60ebc14cc636dac661c1 Signed-off-by: Nathan Chancellor Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295

2019-06-05T15:36:38Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman

bpf: test_bpf: turn off preemption in function __run_once

2019-02-25T21:18:07Z

When running BPF test suite the following splat occurs: [ 415.930950] test_bpf: #0 TAX jited:0 [ 415.931067] BUG: assuming atomic context at lib/test_bpf.c:6674 [ 415.946169] in_atomic(): 0, irqs_disabled(): 0, pid: 11556, name: modprobe [ 415.953176] INFO: lockdep is turned off. [ 415.957207] CPU: 1 PID: 11556 Comm: modprobe Tainted: G W 5.0.0-rc7-next-20190220 #1 [ 415.966328] Hardware name: HiKey Development Board (DT) [ 415.971592] Call trace: [ 415.974069] dump_backtrace+0x0/0x160 [ 415.977761] show_stack+0x24/0x30 [ 415.981104] dump_stack+0xc8/0x114 [ 415.984534] __cant_sleep+0xf0/0x108 [ 415.988145] test_bpf_init+0x5e0/0x1000 [test_bpf] [ 415.992971] do_one_initcall+0x90/0x428 [ 415.996837] do_init_module+0x60/0x1e4 [ 416.000614] load_module+0x1de0/0x1f50 [ 416.004391] __se_sys_finit_module+0xc8/0xe0 [ 416.008691] __arm64_sys_finit_module+0x24/0x30 [ 416.013255] el0_svc_common+0x78/0x130 [ 416.017031] el0_svc_handler+0x38/0x78 [ 416.020806] el0_svc+0x8/0xc Rework so that preemption is disabled when we loop over function 'BPF_PROG_RUN(...)'. Fixes: 568f196756ad ("bpf: check that BPF programs run with preemption disabled") Suggested-by: Arnd Bergmann Signed-off-by: Anders Roxell Signed-off-by: Daniel Borkmann

net: remove VLAN_TAG_PRESENT

2018-11-17T03:25:29Z

Replace VLAN_TAG_PRESENT with single bit flag and free up VLAN.CFI overload. Now VLAN.CFI is visible in networking stack and can be passed around intact. Signed-off-by: Michał Mirosław Signed-off-by: David S. Miller

bpf: test_bpf: add init_net to dev for flow_dissector

2018-09-27T19:09:45Z

Latest changes in __skb_flow_dissect() assume skb->dev has valid nd_net. However, this is not true for test_bpf. As a result, test_bpf.ko crashes the system with the following stack trace: [ 1133.716622] BUG: unable to handle kernel paging request at 0000000000001030 [ 1133.716623] PGD 8000001fbf7ee067 [ 1133.716624] P4D 8000001fbf7ee067 [ 1133.716624] PUD 1f6c1cf067 [ 1133.716625] PMD 0 [ 1133.716628] Oops: 0000 [#1] SMP PTI [ 1133.716630] CPU: 7 PID: 40473 Comm: modprobe Kdump: loaded Not tainted 4.19.0-rc5-00805-gca11cc92ccd2 #1167 [ 1133.716631] Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM12.5 12/06/2017 [ 1133.716638] RIP: 0010:__skb_flow_dissect+0x83/0x1680 [ 1133.716639] Code: 04 00 00 41 0f b7 44 24 04 48 85 db 4d 8d 14 07 0f 84 01 02 00 00 48 8b 43 10 48 85 c0 0f 84 e5 01 00 00 48 8b 80 a8 04 00 00 <48> 8b 90 30 10 00 00 48 85 d2 0f 84 dd 01 00 00 31 c0 b9 05 00 00 [ 1133.716640] RSP: 0018:ffffc900303c7a80 EFLAGS: 00010282 [ 1133.716642] RAX: 0000000000000000 RBX: ffff881fea0b7400 RCX: 0000000000000000 [ 1133.716643] RDX: ffffc900303c7bb4 RSI: ffffffff8235c3e0 RDI: ffff881fea0b7400 [ 1133.716643] RBP: ffffc900303c7b80 R08: 0000000000000000 R09: 000000000000000e [ 1133.716644] R10: ffffc900303c7bb4 R11: ffff881fb6840400 R12: ffffffff8235c3e0 [ 1133.716645] R13: 0000000000000008 R14: 000000000000001e R15: ffffc900303c7bb4 [ 1133.716646] FS: 00007f54e75d3740(0000) GS:ffff881fff5c0000(0000) knlGS:0000000000000000 [ 1133.716648] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1133.716649] CR2: 0000000000001030 CR3: 0000001f6c226005 CR4: 00000000003606e0 [ 1133.716649] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1133.716650] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1133.716651] Call Trace: [ 1133.716660] ? sched_clock_cpu+0xc/0xa0 [ 1133.716662] ? sched_clock_cpu+0xc/0xa0 [ 1133.716665] ? log_store+0x1b5/0x260 [ 1133.716667] ? up+0x12/0x60 [ 1133.716669] ? skb_get_poff+0x4b/0xa0 [ 1133.716674] ? __kmalloc_reserve.isra.47+0x2e/0x80 [ 1133.716675] skb_get_poff+0x4b/0xa0 [ 1133.716680] bpf_skb_get_pay_offset+0xa/0x10 [ 1133.716686] ? test_bpf_init+0x578/0x1000 [test_bpf] [ 1133.716690] ? netlink_broadcast_filtered+0x153/0x3d0 [ 1133.716695] ? free_pcppages_bulk+0x324/0x600 [ 1133.716696] ? 0xffffffffa0279000 [ 1133.716699] ? do_one_initcall+0x46/0x1bd [ 1133.716704] ? kmem_cache_alloc_trace+0x144/0x1a0 [ 1133.716709] ? do_init_module+0x5b/0x209 [ 1133.716712] ? load_module+0x2136/0x25d0 [ 1133.716715] ? __do_sys_finit_module+0xba/0xe0 [ 1133.716717] ? __do_sys_finit_module+0xba/0xe0 [ 1133.716719] ? do_syscall_64+0x48/0x100 [ 1133.716724] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch fixes tes_bpf by using init_net in the dummy dev. Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Reported-by: Eric Dumazet Cc: Willem de Bruijn Cc: Petar Penkov Signed-off-by: Song Liu Reviewed-by: Eric Dumazet Acked-by: Willem de Bruijn Signed-off-by: Daniel Borkmann

test_bpf: flag tests that cannot be jited on s390

2018-06-28T21:58:39Z

Flag with FLAG_EXPECTED_FAIL the BPF_MAXINSNS tests that cannot be jited on s390 because they exceed BPF_SIZE_MAX and fail when CONFIG_BPF_JIT_ALWAYS_ON is set. Also set .expected_errcode to -ENOTSUPP so the tests pass in that case. Signed-off-by: Kleber Sacilotto de Souza Acked-by: Song Liu Signed-off-by: Daniel Borkmann