linux/mm/sparse-vmemmap.c, branch v4.9

treewide: replace obsolete _refok by __ref

2016-08-02T21:31:41Z

There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick Cc: Ingo Molnar Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: convert printk(KERN_ to pr_

2016-03-17T22:09:34Z

Most of the mm subsystem uses pr_ so make it consistent. Miscellanea: - Realign arguments - Add missing newline to format - kmemleak-test.c has a "kmemleak: " prefix added to the "Kmemleak testing" logging message via pr_fmt Signed-off-by: Joe Perches Acked-by: Tejun Heo [percpu] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: coalesce split strings

2016-03-17T22:09:34Z

Kernel style prefers a single string over split strings when the string is 'user-visible'. Miscellanea: - Add a missing newline - Realign arguments Signed-off-by: Joe Perches Acked-by: Tejun Heo [percpu] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86, mm: introduce vmem_altmap to augment vmemmap_populate()

2016-01-16T01:56:32Z

In support of providing struct page for large persistent memory capacities, use struct vmem_altmap to change the default policy for allocating memory for the memmap array. The default vmemmap_populate() allocates page table storage area from the page allocator. Given persistent memory capacities relative to DRAM it may not be feasible to store the memmap in 'System Memory'. Instead vmem_altmap represents pre-allocated "device pages" to satisfy vmemmap_alloc_block_buf() requests. Signed-off-by: Dan Williams Reported-by: kbuild test robot Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/sparse: use memblock apis for early memory allocations

2014-01-22T00:19:47Z

Switch to memblock interfaces for early memory allocator instead of bootmem allocator. No functional change in beahvior than what it is in current code from bootmem users points of view. Archs already converted to NO_BOOTMEM now directly use memblock interfaces instead of bootmem wrappers build on top of memblock. And the archs which still uses bootmem, these new apis just fallback to exiting bootmem APIs. Signed-off-by: Santosh Shilimkar Cc: "Rafael J. Wysocki" Cc: Arnd Bergmann Cc: Christoph Lameter Cc: Greg Kroah-Hartman Cc: Grygorii Strashko Cc: H. Peter Anvin Cc: Johannes Weiner Cc: KAMEZAWA Hiroyuki Cc: Konrad Rzeszutek Wilk Cc: Michal Hocko Cc: Paul Walmsley Cc: Pavel Machek Cc: Russell King Cc: Tejun Heo Cc: Tony Lindgren Cc: Yinghai Lu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sparse-vmemmap: specify vmemmap population range in bytes

2013-04-29T22:54:35Z

The sparse code, when asking the architecture to populate the vmemmap, specifies the section range as a starting page and a number of pages. This is an awkward interface, because none of the arch-specific code actually thinks of the range in terms of 'struct page' units and always translates it to bytes first. In addition, later patches mix huge page and regular page backing for the vmemmap. For this, they need to call vmemmap_populate_basepages() on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind. But these are not necessarily multiples of the 'struct page' size and so this unit is too coarse. Just translate the section range into bytes once in the generic sparse code, then pass byte ranges down the stack. Signed-off-by: Johannes Weiner Cc: Ben Hutchings Cc: Bernhard Schmidt Cc: Johannes Weiner Cc: Russell King Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Benjamin Herrenschmidt Cc: "Luck, Tony" Cc: Heiko Carstens Acked-by: David S. Miller Tested-by: David S. Miller Cc: Wu Fengguang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: try harder to allocate vmemmap blocks

2013-04-29T22:54:35Z

Hot-adding memory on x86_64 normally requires huge page allocation. When this is done to a VM guest, it's usually because the system is already tight on memory, so the request tends to fail. Try to avoid this by adding __GFP_REPEAT to the allocation flags. Addresses http://bugs.debian.org/699913 Signed-off-by: Ben Hutchings Signed-off-by: Johannes Weiner Reported-by: Bernhard Schmidt Tested-by: Bernhard Schmidt Cc: Russell King Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Benjamin Herrenschmidt Cc: "Luck, Tony" Cc: Heiko Carstens Cc: David Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: delete various needless include

2011-10-31T13:20:11Z

There is nothing modular in these files, and no reason to drag in all the 357 headers that module.h brings with it, since it just slows down compiles. Signed-off-by: Paul Gortmaker

tree-wide: fix comment/printk typos

2010-11-01T19:38:34Z

"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König Signed-off-by: Jiri Kosina

x86: Use memblock to replace early_res

2010-08-27T18:12:29Z

1. replace find_e820_area with memblock_find_in_range 2. replace reserve_early with memblock_x86_reserve_range 3. replace free_early with memblock_x86_free_range. 4. NO_BOOTMEM will switch to use memblock too. 5. use _e820, _early wrap in the patch, in following patch, will replace them all 6. because memblock_x86_free_range support partial free, we can remove some special care 7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill() so adjust some calling later in setup.c::setup_arch() -- corruption_check and mptable_update -v2: Move reserve_brk() early Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range() that could happen We have more then 128 RAM entry in E820 tables, and memblock_x86_fill() could use memblock_find_in_range() to find a new place for memblock.memory.region array. and We don't need to use extend_brk() after fill_memblock_area() So move reserve_brk() early before fill_memblock_area(). -v3: Move find_smp_config early To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable in right place. -v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in memblock.reserved already.. use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later. -v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit active_region for 32bit does include high pages need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped() -v6: Use current_limit instead -v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L -v8: Set memblock_can_resize early to handle EFI with more RAM entries -v9: update after kmemleak changes in mainline Suggested-by: David S. Miller Suggested-by: Benjamin Herrenschmidt Suggested-by: Thomas Gleixner Signed-off-by: Yinghai Lu Signed-off-by: H. Peter Anvin