linux/net/bluetooth, branch v6.16

Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU

2025-07-17T14:26:53Z

Configuration request only configure the incoming direction of the peer initiating the request, so using the MTU is the other direction shall not be used, that said the spec allows the peer responding to adjust: Bluetooth Core 6.1, Vol 3, Part A, Section 4.5 'Each configuration parameter value (if any is present) in an L2CAP_CONFIGURATION_RSP packet reflects an ‘adjustment’ to a configuration parameter value that has been sent (or, in case of default values, implied) in the corresponding L2CAP_CONFIGURATION_REQ packet.' That said adjusting the MTU in the response shall be limited to ERTM channels only as for older modes the remote stack may not be able to detect the adjustment causing it to silently drop packets. Link: https://github.com/bluez/bluez/issues/1422 Link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/149 Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4793 Fixes: 042bb9603c44 ("Bluetooth: L2CAP: Fix L2CAP MTU negotiation") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap

2025-07-16T19:37:53Z

The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen Tested-by: Ivan Pravdin Signed-off-by: Kiran K Signed-off-by: Christian Eggers Signed-off-by: Luiz Augusto von Dentz

Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout

2025-07-16T19:33:50Z

This replaces the usage of HCI_ERROR_REMOTE_USER_TERM, which as the name suggest is to indicate a regular disconnection initiated by an user, with HCI_ERROR_AUTH_FAILURE to indicate the session has timeout thus any pairing shall be considered as failed. Fixes: 1e91c29eb60c ("Bluetooth: Use hci_disconnect for immediate disconnection from SMP") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: SMP: If an unallowed command is received consider it a failure

2025-07-16T19:33:30Z

If a command is received while a bonding is ongoing consider it a pairing failure so the session is cleanup properly and the device is disconnected immediately instead of continuing with other commands that may result in the session to get stuck without ever completing such as the case bellow: > ACL Data RX: Handle 2048 flags 0x02 dlen 21 SMP: Identity Information (0x08) len 16 Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0 > ACL Data RX: Handle 2048 flags 0x02 dlen 21 SMP: Signing Information (0x0a) len 16 Signature key[16]: 1716c536f94e843a9aea8b13ffde477d Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX > ACL Data RX: Handle 2048 flags 0x02 dlen 12 SMP: Identity Address Information (0x09) len 7 Address: XX:XX:XX:XX:XX:XX (Intel Corporate) While accourding to core spec 6.1 the expected order is always BD_ADDR first first then CSRK: When using LE legacy pairing, the keys shall be distributed in the following order: LTK by the Peripheral EDIV and Rand by the Peripheral IRK by the Peripheral BD_ADDR by the Peripheral CSRK by the Peripheral LTK by the Central EDIV and Rand by the Central IRK by the Central BD_ADDR by the Central CSRK by the Central When using LE Secure Connections, the keys shall be distributed in the following order: IRK by the Peripheral BD_ADDR by the Peripheral CSRK by the Peripheral IRK by the Central BD_ADDR by the Central CSRK by the Central According to the Core 6.1 for commands used for key distribution "Key Rejected" can be used: '3.6.1. Key distribution and generation A device may reject a distributed key by sending the Pairing Failed command with the reason set to "Key Rejected". Fixes: b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: fix connectable extended advertising when using static random address

2025-07-16T19:32:55Z

Currently, the connectable flag used by the setup of an extended advertising instance drives whether we require privacy when trying to pass a random address to the advertising parameters (Own Address). If privacy is not required, then it automatically falls back to using the controller's public address. This can cause problems when using controllers that do not have a public address set, but instead use a static random address. e.g. Assume a BLE controller that does not have a public address set. The controller upon powering is set with a random static address by default by the kernel. < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 Address: E4:AF:26:D8:3E:3A (Static) > HCI Event: Command Complete (0x0e) plen 4 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) Setting non-connectable extended advertisement parameters in bluetoothctl mgmt add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g 1 correctly sets Own address type as Random < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 ... Own address type: Random (0x01) Setting connectable extended advertisement parameters in bluetoothctl mgmt add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g -c 1 mistakenly sets Own address type to Public (which causes to use Public Address 00:00:00:00:00:00) < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 ... Own address type: Public (0x00) This causes either the controller to emit an Invalid Parameters error or to mishandle the advertising. This patch makes sure that we use the already set static random address when requesting a connectable extended advertising when we don't require privacy and our public address is not set (00:00:00:00:00:00). Fixes: 3fe318ee72c5 ("Bluetooth: move hci_get_random_address() to hci_sync") Signed-off-by: Alessandro Gasbarroni Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()

2025-07-16T19:27:38Z

syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0] l2cap_sock_resume_cb() has a similar problem that was fixed by commit 1bff51ea59a9 ("Bluetooth: fix use-after-free error in lock_sock_nested()"). Since both l2cap_sock_kill() and l2cap_sock_resume_cb() are executed under l2cap_sock_resume_cb(), we can avoid the issue simply by checking if chan->data is NULL. Let's not access to the killed socket in l2cap_sock_resume_cb(). [0]: BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:82 [inline] BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline] BUG: KASAN: null-ptr-deref in l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711 Write of size 8 at addr 0000000000000570 by task kworker/u9:0/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: hci0 hci_rx_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:501 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 print_report+0x58/0x84 mm/kasan/report.c:524 kasan_report+0xb0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189 __kasan_check_write+0x20/0x30 mm/kasan/shadow.c:37 instrument_atomic_write include/linux/instrumented.h:82 [inline] clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline] l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711 l2cap_security_cfm+0x524/0xea0 net/bluetooth/l2cap_core.c:7357 hci_auth_cfm include/net/bluetooth/hci_core.h:2092 [inline] hci_auth_complete_evt+0x2e8/0xa4c net/bluetooth/hci_event.c:3514 hci_event_func net/bluetooth/hci_event.c:7511 [inline] hci_event_packet+0x650/0xe9c net/bluetooth/hci_event.c:7565 hci_rx_work+0x320/0xb18 net/bluetooth/hci_core.c:4070 process_one_work+0x7e8/0x155c kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3321 [inline] worker_thread+0x958/0xed8 kernel/workqueue.c:3402 kthread+0x5fc/0x75c kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847 Fixes: d97c899bde33 ("Bluetooth: Introduce L2CAP channel callback for resuming") Reported-by: syzbot+e4d73b165c3892852d22@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/686c12bd.a70a0220.29fe6c.0b13.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_event: Fix not marking Broadcast Sink BIS as connected

2025-07-03T15:37:43Z

Upon receiving HCI_EVT_LE_BIG_SYNC_ESTABLISHED with status 0x00 (success) the corresponding BIS hci_conn state shall be set to BT_CONNECTED otherwise they will be left with BT_OPEN which is invalid at that point, also create the debugfs and sysfs entries following the same logic as the likes of Broadcast Source BIS and CIS connections. Fixes: f777d8827817 ("Bluetooth: ISO: Notify user space about failed bis connections") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Fix attempting to send HCI_Disconnect to BIS handle

2025-07-03T15:37:24Z

BIS/PA connections do have their own cleanup proceedure which are performed by hci_conn_cleanup/bis_cleanup. Fixes: 23205562ffc8 ("Bluetooth: separate CIS_LINK and BIS_LINK link types") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Fix not disabling advertising instance

2025-07-03T15:35:52Z

As the code comments on hci_setup_ext_adv_instance_sync suggests the advertising instance needs to be disabled in order to update its parameters, but it was wrongly checking that !adv->pending. Fixes: cba6b758711c ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2") Signed-off-by: Luiz Augusto von Dentz

Bluetooth: HCI: Set extended advertising data synchronously

2025-06-27T18:01:20Z

Currently, for controllers with extended advertising, the advertising data is set in the asynchronous response handler for extended adverstising params. As most advertising settings are performed in a synchronous context, the (asynchronous) setting of the advertising data is done too late (after enabling the advertising). Move setting of adverstising data from asynchronous response handler into synchronous context to fix ordering of HCI commands. Signed-off-by: Christian Eggers Fixes: a0fb3726ba55 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Cc: stable@vger.kernel.org v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/ Signed-off-by: Luiz Augusto von Dentz