linux/net/bluetooth, branch v6.7

Bluetooth: af_bluetooth: Fix Use-After-Free in bt_sock_recvmsg

2023-12-15T16:54:18Z

This can cause a race with bt_sock_ioctl() because bt_sock_recvmsg() gets the skb from sk->sk_receive_queue and then frees it without holding lock_sock. A use-after-free for a skb occurs with the following flow. ``` bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() bt_sock_ioctl() -> skb_peek() ``` Add lock_sock to bt_sock_recvmsg() to fix this issue. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Add more enc key size check

2023-12-15T16:53:47Z

When we are slave role and receives l2cap conn req when encryption has started, we should check the enc key size to avoid KNOB attack or BLUFFS attack. From SIG recommendation, implementations are advised to reject service-level connections on an encrypted baseband link with key strengths below 7 octets. A simple and clear way to achieve this is to place the enc key size check in hci_cc_read_enc_key_size() The btmon log below shows the case that lacks enc key size check. > HCI Event: Connect Request (0x04) plen 10 Address: BB:22:33:44:55:99 (OUI BB-22-33) Class: 0x480104 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Desktop workstation Capturing (Scanner, Microphone) Telephony (Cordless telephony, Modem, Headset) Link type: ACL (0x01) < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 Address: BB:22:33:44:55:99 (OUI BB-22-33) Role: Peripheral (0x01) > HCI Event: Command Status (0x0f) plen 4 Accept Connection Request (0x01|0x0009) ncmd 2 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Link type: ACL (0x01) Encryption: Disabled (0x00) ... > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Encryption: Enabled with E0 (0x01) < HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2 Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) > HCI Event: Command Complete (0x0e) plen 7 Read Encryption Key Size (0x05|0x0008) ncmd 2 Status: Success (0x00) Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Key size: 6 // We should check the enc key size ... > ACL Data RX: Handle 1 flags 0x02 dlen 12 L2CAP: Connection Request (0x02) ident 3 len 4 PSM: 25 (0x0019) Source CID: 64 < ACL Data TX: Handle 1 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 3 len 8 Destination CID: 64 Source CID: 64 Result: Connection pending (0x0001) Status: Authorization pending (0x0002) > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33) Count: 1 #35: len 16 (25 Kb/s) Latency: 5 msec (2-7 msec ~4 msec) < ACL Data TX: Handle 1 flags 0x00 dlen 16 L2CAP: Connection Response (0x03) ident 3 len 8 Destination CID: 64 Source CID: 64 Result: Connection successful (0x0000) Status: No further information available (0x0000) Cc: stable@vger.kernel.org Signed-off-by: Alex Lu Signed-off-by: Max Chou Signed-off-by: Luiz Augusto von Dentz

Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE

2023-12-15T16:53:09Z

If two Bluetooth devices both support BR/EDR and BLE, and also support Secure Connections, then they only need to pair once. The LTK generated during the LE pairing process may be converted into a BR/EDR link key for BR/EDR transport, and conversely, a link key generated during the BR/EDR SSP pairing process can be converted into an LTK for LE transport. Hence, the link type of the link key and LTK is not fixed, they can be either an LE LINK or an ACL LINK. Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the link type is fixed, which could lead to incorrect address types being reported to the application layer. Therefore, it is necessary to add link_type/addr_type to the smp_irk/ltk/crsk and link_key, to ensure the generation of the correct address type. SMP over BREDR: Before Fix: > ACL Data RX: Handle 11 flags 0x02 dlen 12 BR/EDR SMP: Identity Address Information (0x09) len 7 Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 00:00:00:00:00:00 (Non-Resolvable) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) After Fix: > ACL Data RX: Handle 11 flags 0x02 dlen 12 BR/EDR SMP: Identity Address Information (0x09) len 7 Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 00:00:00:00:00:00 (Non-Resolvable) BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) SMP over LE: Before Fix: @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 5F:5C:07:37:47:D5 (Resolvable) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) @ MGMT Event: New Link Key (0x0009) plen 26 BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated Combination key from P-256 (0x08) After Fix: @ MGMT Event: New Identity Resolving Key (0x0018) plen 30 Random address: 5E:03:1C:00:38:21 (Resolvable) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) @ MGMT Event: New Long Term Key (0x000a) plen 37 LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated key from P-256 (0x03) @ MGMT Event: New Link Key (0x0009) plen 26 Store hint: Yes (0x01) LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76) Key type: Authenticated Combination key from P-256 (0x08) Cc: stable@vger.kernel.org Signed-off-by: Xiao Yao Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: Send reject on command corrupted request

2023-12-15T16:52:38Z

L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet with 2 commands in it (a connection request and an unknown command) and expect to get a connection response packet and a command reject packet. The second is currently not sent. Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_event: shut up a false-positive warning

2023-12-15T16:51:08Z

Turning on -Wstringop-overflow globally exposed a misleading compiler warning in bluetooth: net/bluetooth/hci_event.c: In function 'hci_cc_read_class_of_dev': net/bluetooth/hci_event.c:524:9: error: 'memcpy' writing 3 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=] 524 | memcpy(hdev->dev_class, rp->dev_class, 3); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The problem here is the check for hdev being NULL in bt_dev_dbg() that leads the compiler to conclude that hdev->dev_class might be an invalid pointer access. Add another explicit check for the same condition to make sure gcc sees this cannot happen. Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes") Fixes: 1b56c90018f0 ("Makefile: Enable -Wstringop-overflow globally") Signed-off-by: Arnd Bergmann Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_event: Fix not checking if HCI_OP_INQUIRY has been sent

2023-12-15T16:50:34Z

Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent otherwise the controller maybe be generating invalid events or, more likely, it is a result of fuzzing tools attempting to test the right behavior of the stack when unexpected events are generated. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151 Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Fix not notifying when connection encryption changes

2023-12-15T16:24:42Z

Some layers such as SMP depend on getting notified about encryption changes immediately as they only allow certain PDU to be transmitted over an encrypted link which may cause SMP implementation to reject valid PDUs received thus causing pairing to fail when it shouldn't. Fixes: 7aca0ac4792e ("Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete") Signed-off-by: Luiz Augusto von Dentz

Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2023-11-03T02:15:30Z

Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ...

Bluetooth: hci_sync: Fix Opcode prints in bt_dev_dbg/err

2023-10-23T18:05:32Z

Printed Opcodes may be missing leading zeros: Bluetooth: hci0: Opcode 0x c03 failed: -110 Fix this by always printing leading zeros: Bluetooth: hci0: Opcode 0x0c03 failed: -110 Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages") Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution") Signed-off-by: Marcel Ziswiler Signed-off-by: Luiz Augusto von Dentz

Bluetooth: Fix double free in hci_conn_cleanup

2023-10-23T18:05:11Z

syzbot reports a slab use-after-free in hci_conn_hash_flush [1]. After releasing an object using hci_conn_del_sysfs in the hci_conn_cleanup function, releasing the same object again using the hci_dev_put and hci_conn_put functions causes a double free. Here's a simplified flow: hci_conn_del_sysfs: hci_dev_put put_device kobject_put kref_put kobject_release kobject_cleanup kfree_const kfree(name) hci_dev_put: ... kfree(name) hci_conn_put: put_device ... kfree(name) This patch drop the hci_dev_put and hci_conn_put function call in hci_conn_cleanup function, because the object is freed in hci_conn_del_sysfs function. This patch also fixes the refcounting in hci_conn_add_sysfs() and hci_conn_del_sysfs() to take into account device_add() failures. This fixes CVE-2023-28464. Link: https://syzkaller.appspot.com/bug?id=1bb51491ca5df96a5f724899d1dbb87afda61419 [1] Signed-off-by: ZhengHan Wang Co-developed-by: Luiz Augusto von Dentz Signed-off-by: Luiz Augusto von Dentz