linux/net/ceph, branch v5.8

libceph: don't omit used_replica in target_copy()

2020-06-16T14:02:08Z

Currently target_copy() is used only for sending linger pings, so this doesn't come up, but generally omitting used_replica can hang the client as we wouldn't notice the acting set change (legacy_change in calc_target()) or trigger a warning in handle_reply(). Fixes: 117d96a04f00 ("libceph: support for balanced and localized reads") Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

libceph: don't omit recovery_deletes in target_copy()

2020-06-16T14:02:04Z

Currently target_copy() is used only for sending linger pings, so this doesn't come up, but generally omitting recovery_deletes can result in unneeded resends (force_resend in calc_target()). Fixes: ae78dd8139ce ("libceph: make RECOVERY_DELETES feature create a new interval") Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

libceph: move away from global osd_req_flags

2020-06-16T14:01:53Z

osd_req_flags is overly general and doesn't suit its only user (read_from_replica option) well: - applying osd_req_flags in account_request() affects all OSD requests, including linger (i.e. watch and notify). However, linger requests should always go to the primary even though some of them are reads (e.g. notify has side effects but it is a read because it doesn't result in mutation on the OSDs). - calls to class methods that are reads are allowed to go to the replica, but most such calls issued for "rbd map" and/or exclusive lock transitions are requested to be resent to the primary via EAGAIN, doubling the latency. Get rid of global osd_req_flags and set read_from_replica flag only on specific OSD requests instead. Fixes: 8ad44d5e0d1e ("libceph: read_from_replica option") Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

Merge tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client

2020-06-08T19:49:18Z

Pull ceph updates from Ilya Dryomov: "The highlights are: - OSD/MDS latency and caps cache metrics infrastructure for the filesytem (Xiubo Li). Currently available through debugfs and will be periodically sent to the MDS in the future. - support for replica reads (balanced and localized reads) for rbd and the filesystem (myself). The default remains to always read from primary, users can opt-in with the new crush_location and read_from_replica options. Note that reading from replica is safe for general use only since Octopus. - support for RADOS allocation hint flags (myself). Currently used by rbd to propagate the compressible/incompressible hint given with the new compression_hint map option and ready for passing on more advanced hints, e.g. based on fadvise() from the filesystem. - support for efficient cross-quota-realm renames (Luis Henriques) - assorted cap handling improvements and cleanups, particularly untangling some of the locking (Jeff Layton)" * tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client: (29 commits) rbd: compression_hint option libceph: support for alloc hint flags libceph: read_from_replica option libceph: support for balanced and localized reads libceph: crush_location infrastructure libceph: decode CRUSH device/bucket types and names libceph: add non-asserting rbtree insertion helper ceph: skip checking caps when session reconnecting and releasing reqs ceph: make sure mdsc->mutex is nested in s->s_mutex to fix dead lock ceph: don't return -ESTALE if there's still an open file libceph, rbd: replace zero-length array with flexible-array ceph: allow rename operation under different quota realms ceph: normalize 'delta' parameter usage in check_quota_exceeded ceph: ceph_kick_flushing_caps needs the s_mutex ceph: request expedited service on session's last cap flush ceph: convert mdsc->cap_dirty to a per-session list ceph: reset i_requested_max_size if file write is not wanted ceph: throw a warning if we destroy session with mutex still locked ceph: fix potential race in ceph_check_caps ceph: document what protects i_dirty_item and i_flushing_item ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

mm: remove map_vm_range

2020-06-02T17:59:11Z

Switch all callers to map_kernel_range, which symmetric to the unmap side (as well as the _noflush versions). Signed-off-by: Christoph Hellwig Signed-off-by: Andrew Morton Acked-by: Peter Zijlstra (Intel) Cc: Christian Borntraeger Cc: Christophe Leroy Cc: Daniel Vetter Cc: David Airlie Cc: Gao Xiang Cc: Greg Kroah-Hartman Cc: Haiyang Zhang Cc: Johannes Weiner Cc: "K. Y. Srinivasan" Cc: Laura Abbott Cc: Mark Rutland Cc: Michael Kelley Cc: Minchan Kim Cc: Nitin Gupta Cc: Robin Murphy Cc: Sakari Ailus Cc: Stephen Hemminger Cc: Sumit Semwal Cc: Wei Liu Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Heiko Carstens Cc: Paul Mackerras Cc: Vasily Gorbik Cc: Will Deacon Link: http://lkml.kernel.org/r/20200414131348.444715-17-hch@lst.de Signed-off-by: Linus Torvalds

libceph: support for alloc hint flags

2020-06-01T21:32:35Z

Allow indicating future I/O pattern via flags. This is supported since Kraken (and bluestore persists flags together with expected_object_size and expected_write_size). Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman

libceph: read_from_replica option

2020-06-01T11:22:53Z

Expose replica reads through read_from_replica=balance and read_from_replica=localize. The default is to read from primary (read_from_replica=no). Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

libceph: support for balanced and localized reads

2020-06-01T11:22:53Z

OSD-side issues with reads from replica have been resolved in Octopus. Reading from replica should be safe wrt. unstable or uncommitted state now, so add support for balanced and localized reads. There are two cases when a read from replica can't be served: - OSD may silently drop the request, expecting the client to notice that the acting set has changed and resend via the usual means (handled with t->used_replica) - OSD may return EAGAIN, expecting the client to resend to the primary, ignoring replica read flags (see handle_reply()) Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

libceph: crush_location infrastructure

2020-06-01T11:22:53Z

Allow expressing client's location in terms of CRUSH hierarchy as a set of (bucket type name, bucket name) pairs. The userspace syntax "crush_location = key1=value1 key2=value2" is incompatible with mount options and needed adaptation. Key-value pairs are separated by '|' and we use ':' instead of '=' to separate keys from values. So for: crush_location = host=foo rack=bar one would write: crush_location=host:foo|rack:bar As in userspace, "multipath" locations are supported, so indicating locality for parallel hierarchies is possible: crush_location=rack:foo1|rack:foo2|datacenter:bar Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton