linux/net/core, branch v5.8

devlink: ignore -EOPNOTSUPP errors on dumpit

2020-07-30T23:51:53Z

Number of .dumpit functions try to ignore -EOPNOTSUPP errors. Recent change missed that, and started reporting all errors but -EMSGSIZE back from dumps. This leads to situation like this: $ devlink dev info devlink answers: Operation not supported Dump should not report an error just because the last device to be queried could not provide an answer. To fix this and avoid similar confusion make sure we clear err properly, and not leave it set to an error if we don't terminate the iteration. Fixes: c62c2cfb801b ("net: devlink: don't ignore errors during dumpit") Signed-off-by: Jakub Kicinski Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller

mlxsw: spectrum: Use different trap group for externally routed packets

2020-07-29T19:16:21Z

Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber Tested-by: Alex Veber Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller

dev: Defer free of skbs in flush_backlog

2020-07-25T02:59:22Z

IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller

flow_offload: Move rhashtable inclusion to the source file

2020-07-24T22:17:22Z

I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to be rebuilt. This dependency came through a bogus inclusion in the file net/flow_offload.h. This patch moves it to the right place. This patch also removes a lingering rhashtable inclusion in cls_api created by the same commit. Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...") Signed-off-by: Herbert Xu Signed-off-by: David S. Miller

net-sysfs: add a newline when printing 'tx_timeout' by sysfs

2020-07-21T22:35:58Z

When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout 0root@syzkaller:~# Signed-off-by: Xiongfeng Wang Signed-off-by: David S. Miller

udp: Copy has_conns in reuseport_grow().

2020-07-21T22:31:02Z

If an unconnected socket in a UDP reuseport group connect()s, has_conns is set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all sockets in udp_hslot looking for the connected socket with the highest score. However, when the number of sockets bound to the port exceeds max_socks, reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2() to return without scanning all sockets, resulting in that packets sent to connected sockets may be distributed to unconnected sockets. Therefore, reuseport_grow() should copy has_conns. Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Kuniyuki Iwashima Acked-by: Willem de Bruijn Signed-off-by: David S. Miller

rtnetlink: Fix memory(net_device) leak when ->newlink fails

2020-07-17T19:33:18Z

When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED. BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Reported-by: Hulk Robot Signed-off-by: Weilong Chen Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-07-11T01:16:22Z

Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ...

Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

2020-07-09T20:09:30Z

Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred

bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()

2020-07-08T23:01:21Z

When evaluating access control over kallsyms visibility, credentials at open() time need to be used, not the "current" creds (though in BPF's case, this has likely always been the same). Plumb access to associated file->f_cred down through bpf_dump_raw_ok() and its callers now that kallsysm_show_value() has been refactored to take struct cred. Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: bpf@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump") Signed-off-by: Kees Cook