linux/net/dsa, branch v6.7

net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT

2023-10-24T20:08:14Z

This preserves the existing IFLA_DSA_MASTER which is part of the uAPI and creates an alias named IFLA_DSA_CONDUIT. Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20231023181729.1191071-3-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski

net: dsa: Use conduit and user terms

2023-10-24T20:08:14Z

Use more inclusive terms throughout the DSA subsystem by moving away from "master" which is replaced by "conduit" and "slave" which is replaced by "user". No functional changes. Acked-by: Rob Herring Acked-by: Stephen Hemminger Reviewed-by: Vladimir Oltean Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski

net: dsa: remove dsa_port_phylink_validate()

2023-10-11T09:06:05Z

As all drivers now provide phylink capabilities (including MAC), the if() condition in dsa_port_phylink_validate() will always be true. We will always use the generic validator, which phylink will call itself if the .validate method isn't populated. Thus, there is now no need to implement the .validate method, so this implementation can be removed. Signed-off-by: Russell King (Oracle) Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: tag_ksz: Extend ksz9477_xmit() for HSR frame duplication

2023-10-03T11:51:02Z

The KSZ9477 has support for HSR (High-Availability Seamless Redundancy). One of its offloading (i.e. performed in the switch IC hardware) features is to duplicate received frame to both HSR aware switch ports. To achieve this goal - the tail TAG needs to be modified. To be more specific, both ports must be marked as destination (egress) ones. The NETIF_F_HW_HSR_DUP flag indicates that the device supports HSR and assures (in HSR core code) that frame is sent only once from HOST to switch with tail tag indicating both ports. Signed-off-by: Lukasz Majewski Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Signed-off-by: Paolo Abeni

net: dsa: notify drivers of MAC address changes on user ports

2023-10-03T11:51:02Z

In some cases, drivers may need to veto the changing of a MAC address on a user port. Such is the case with KSZ9477 when it offloads a HSR device, because it programs the MAC address of multiple ports to a shared hardware register. Those ports need to have equal MAC addresses for the lifetime of the HSR offload. Signed-off-by: Vladimir Oltean Signed-off-by: Lukasz Majewski Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Signed-off-by: Paolo Abeni

net: dsa: propagate extack to ds->ops->port_hsr_join()

2023-10-03T11:51:02Z

Drivers can provide meaningful error messages which state a reason why they can't perform an offload, and dsa_slave_changeupper() already has the infrastructure to propagate these over netlink rather than printing to the kernel log. So pass the extack argument and modify the xrs700x driver's port_hsr_join() prototype. Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases from xrs700x_hsr_join(). Signed-off-by: Vladimir Oltean Signed-off-by: Lukasz Majewski Reviewed-by: Florian Fainelli Reviewed-by: Vladimir Oltean Signed-off-by: Paolo Abeni

net: dsa: mark parsed interface mode for legacy switch drivers

2023-08-09T20:08:09Z

If we successfully parsed an interface mode with a legacy switch driver, populate that mode into phylink's supported interfaces rather than defaulting to the internal and gmii interfaces. This hasn't caused an issue so far, because when the interface doesn't match a supported one, phylink_validate() doesn't clear the supported mask, but instead returns -EINVAL. phylink_parse_fixedlink() doesn't check this return value, and merely relies on the supported ethtool link modes mask being cleared. Therefore, the fixed link settings end up being allowed despite validation failing. Before this causes a problem, arrange for DSA to more accurately populate phylink's supported interfaces mask so validation can correctly succeed. Signed-off-by: Russell King (Oracle) Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/E1qTKdM-003Cpx-Eh@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-08-03T21:34:37Z

Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski

net: dsa: tag_qca: return early if dev is not found

2023-08-01T10:02:42Z

Currently checksum is recalculated and dsa tag stripped even if we later don't find the dev. To improve code, exit early if we don't find the dev and skip additional operation on the skb since it will be freed anyway. Signed-off-by: Christian Marangi Reviewed-by: Simon Horman Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20230730074113.21889-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni

net: dsa: fix older DSA drivers using phylink

2023-07-28T00:19:46Z

Older DSA drivers that do not provide an dsa_ops adjust_link method end up using phylink. Unfortunately, a recent phylink change that requires its supported_interfaces bitmap to be filled breaks these drivers because the bitmap remains empty. Rather than fixing each driver individually, fix it in the core code so we have a sensible set of defaults. Reported-by: Sergei Antonov Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Russell King (Oracle) Reviewed-by: Vladimir Oltean Tested-by: Vladimir Oltean # dsa_loop Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/E1qOflM-001AEz-D3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski