linux/net/ethtool, branch v6.14

net: ethtool: tsinfo: Fix dump command

2025-03-10T20:14:25Z

Fix missing initialization of ts_info->phc_index in the dump command, which could cause a netdev interface to incorrectly display a PTP provider at index 0 instead of "none". Fix it by initializing the phc_index to -1. In the same time, restore missing initialization of ts_info.cmd for the IOCTL case, as it was before the transition from ethnl_default_dumpit to custom ethnl_tsinfo_dumpit. Also, remove unnecessary zeroing of ts_info, as it is embedded within reply_data, which is fully zeroed two lines earlier. Fixes: b9e3f7dc9ed95 ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology") Signed-off-by: Kory Maincent Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250307091255.463559-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device

2025-03-05T01:12:01Z

ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper. Fixes: c15e065b46dc ("net: ethtool: Allow passing a phy index for some commands") Signed-off-by: Maxime Chevallier Reviewed-by: Kory Maincent Reported-by: Parthiban Veerasooran Link: https://patch.msgid.link/20250301141114.97204-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski

net: ethtool: fix ioctl confusing drivers about desired HDS user config

2025-02-24T22:15:42Z

The legacy ioctl path does not have support for extended attributes. So we issue a GET to fetch the current settings from the driver, in an attempt to keep them unchanged. HDS is a bit "special" as the GET only returns on/off while the SET takes a "ternary" argument (on/off/default). If the driver was in the "default" setting - executing the ioctl path binds it to on or off, even tho the user did not intend to change HDS config. Factor the relevant logic out of the netlink code and reuse it. Fixes: 87c8f8496a05 ("bnxt_en: add support for tcp-data-split ethtool command") Acked-by: Stanislav Fomichev Tested-by: Daniel Xu Tested-by: Taehee Yoo Link: https://patch.msgid.link/20250221025141.1132944-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ethtool: tsconfig: Fix netlink type of hwtstamp flags

2025-02-07T00:35:21Z

Fix the netlink type for hardware timestamp flags, which are represented as a bitset of flags. Although only one flag is supported currently, the correct netlink bitset type should be used instead of u32 to keep consistency with other fields. Address this by adding a new named string set description for the hwtstamp flag structure. The code has been introduced in the current release so the uAPI change is still okay. Signed-off-by: Kory Maincent Fixes: 6e9e2eed4f39 ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config") Link: https://patch.msgid.link/20250205110304.375086-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski

ethtool: ntuple: fix rss + ring_cookie check

2025-02-04T02:38:58Z

The info.flow_type is for RXFH commands, ntuple flow_type is inside the flow spec. The check currently does nothing, as info.flow_type is 0 (or even uninitialized by user space) for ETHTOOL_SRXCLSRLINS. Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in") Reviewed-by: Gal Pressman Reviewed-by: Joe Damato Link: https://patch.msgid.link/20250201013040.725123-3-kuba@kernel.org Signed-off-by: Jakub Kicinski

ethtool: rss: fix hiding unsupported fields in dumps

2025-02-04T02:38:52Z

Commit ec6e57beaf8b ("ethtool: rss: don't report key if device doesn't support it") intended to stop reporting key fields for additional rss contexts if device has a global hashing key. Later we added dump support and the filtering wasn't properly added there. So we end up reporting the key fields in dumps but not in dos: # ./pyynl/cli.py --spec netlink/specs/ethtool.yaml --do rss-get \ --json '{"header": {"dev-index":2}, "context": 1 }' { "header": { ... }, "context": 1, "indir": [0, 1, 2, 3, ...]] } # ./pyynl/cli.py --spec netlink/specs/ethtool.yaml --dump rss-get [ ... snip context 0 ... { "header": { ... }, "context": 1, "indir": [0, 1, 2, 3, ...], -> "input_xfrm": 255, -> "hfunc": 1, -> "hkey": "000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" } ] Hide these fields correctly. The drivers/net/hw/rss_ctx.py selftest catches this when run on a device with single key, already: # Check| At /root/./ksft-net-drv/drivers/net/hw/rss_ctx.py, line 381, in test_rss_context_dump: # Check| ksft_ne(set(data.get('hkey', [1])), {0}, "key is all zero") # Check failed {0} == {0} key is all zero not ok 8 rss_ctx.test_rss_context_dump Fixes: f6122900f4e2 ("ethtool: rss: support dumping RSS contexts") Reviewed-by: Gal Pressman Reviewed-by: Joe Damato Link: https://patch.msgid.link/20250201013040.725123-2-kuba@kernel.org Signed-off-by: Jakub Kicinski

ethtool: Fix set RXNFC command with symmetric RSS hash

2025-01-28T11:25:42Z

The sanity check that both source and destination are set when symmetric RSS hash is requested is only relevant for ETHTOOL_SRXFH (rx-flow-hash), it should not be performed on any other commands (e.g. ETHTOOL_SRXCLSRLINS/ETHTOOL_SRXCLSRLDEL). This resolves accessing uninitialized 'info.data' field, and fixes false errors in rule insertion: # ethtool --config-ntuple eth2 flow-type ip4 dst-ip 255.255.255.255 action -1 loc 0 rmgr: Cannot insert RX class rule: Invalid argument Cannot insert classification rule Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash") Cc: Ahmed Zaki Reviewed-by: Tariq Toukan Signed-off-by: Gal Pressman Reviewed-by: Michal Swiatkowski Reviewed-by: Edward Cree Reviewed-by: Ahmed Zaki Link: https://patch.msgid.link/20250126191845.316589-1-gal@nvidia.com Signed-off-by: Paolo Abeni

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-01-21T09:24:33Z

No conflicts and no adjacent changes. Signed-off-by: Paolo Abeni

net: ethtool: populate the default HDS params in the core

2025-01-20T19:44:58Z

The core has the current HDS config, it can pre-populate the values for the drivers. While at it, remove the zero-setting in netdevsim. Zero are the default values since the config is zalloc'ed. Reviewed-by: Michael Chan Link: https://patch.msgid.link/20250119020518.1962249-6-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: provide pending ring configuration in net_device

2025-01-20T19:44:57Z

Record the pending configuration in net_device struct. ethtool core duplicates the current config and the specific handlers (for now just ringparam) can modify it. Reviewed-by: Michael Chan Link: https://patch.msgid.link/20250119020518.1962249-4-kuba@kernel.org Signed-off-by: Jakub Kicinski