linux/net/ethtool, branch v6.4

ethtool: Fix uninitialized number of lanes

2023-05-03T08:13:20Z

It is not possible to set the number of lanes when setting link modes using the legacy IOCTL ethtool interface. Since 'struct ethtool_link_ksettings' is not initialized in this path, drivers receive an uninitialized number of lanes in 'struct ethtool_link_ksettings::lanes'. When this information is later queried from drivers, it results in the ethtool code making decisions based on uninitialized memory, leading to the following KMSAN splat [1]. In practice, this most likely only happens with the tun driver that simply returns whatever it got in the set operation. As far as I can tell, this uninitialized memory is not leaked to user space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in linkmodes_prepare_data(). Fix by initializing the structure in the IOCTL path. Did not find any more call sites that pass an uninitialized structure when calling 'ethtool_ops::set_link_ksettings()'. [1] BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline] ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544 __ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441 ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327 ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640 genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmsg net/socket.c:2584 [inline] __do_sys_sendmsg net/socket.c:2593 [inline] __se_sys_sendmsg net/socket.c:2591 [inline] __x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553 ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524 sock_do_ioctl+0x295/0x540 net/socket.c:1213 sock_ioctl+0x729/0xd90 net/socket.c:1316 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0x222/0x400 fs/ioctl.c:856 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Local variable link_ksettings created at: ethtool_set_link_ksettings+0x54/0x690 net/ethtool/ioctl.c:577 __dev_ethtool net/ethtool/ioctl.c:3024 [inline] dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078 Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Reported-and-tested-by: syzbot+ef6edd9f1baaa54d6235@syzkaller.appspotmail.com Link: https://lore.kernel.org/netdev/0000000000004bb41105fa70f361@google.com/ Reviewed-by: Danielle Ratson Signed-off-by: Ido Schimmel Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller

net: ethtool: coalesce: try to make user settings stick twice

2023-04-25T01:09:49Z

SET_COALESCE may change operation mode and parameters in one call. Changing operation mode may cause the driver to reset the parameter values to what is a reasonable default for new operation mode. Since driver does not know which parameters come from user and which are echoed back from ->get, driver may ignore the parameters when switching operation modes. This used to be inevitable for ioctl() but in netlink we know which parameters are actually specified by the user. We could inform which parameters were set by the user but this would lead to a lot of code duplication in the drivers. Instead try to call the drivers twice if both mode and params are changed. The set method already checks if any params need updating so in case the driver did the right thing the first time around - there will be no second call to it's ->set method (only an extra call to ->get()). For mlx5 for example before this patch we'd see: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 3 rx-frames: 32 tx-usecs: 16 tx-frames: 32 [...] After the change: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 123 rx-frames: 32 tx-usecs: 123 tx-frames: 32 [...] This only works for netlink, so it's a small discrepancy between netlink and ioctl(). Since we anticipate most users to move to netlink I believe it's worth making their lives easier. Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ethtool: mm: sanitize some UAPI configurations

2023-04-21T03:03:21Z

The verify-enabled boolean (ETHTOOL_A_MM_VERIFY_ENABLED) was intended to be a sub-setting of tx-enabled (ETHTOOL_A_MM_TX_ENABLED). IOW, MAC Merge TX can be enabled with or without verification, but verification with TX disabled makes no sense. The pmac-enabled boolean (ETHTOOL_A_MM_PMAC_ENABLED) was intended to be a global toggle from an API perspective, whereas tx-enabled just handles the TX direction. IOW, the pMAC can be enabled with or without TX, but it doesn't make sense to enable TX if the pMAC is not enabled. Add two checks which sanitize and reject these invalid cases. Signed-off-by: Vladimir Oltean Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski

net: ethtool: create and export ethtool_dev_mm_supported()

2023-04-14T05:22:10Z

Create a wrapper over __ethtool_dev_mm_supported() which also calls ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code layers, such as tc, to make sure that preemptible TCs are supported (this is true if an underlying MAC Merge layer exists). Signed-off-by: Vladimir Oltean Reviewed-by: Ferenc Fejes Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-04-06T19:01:20Z

Conflicts: drivers/net/ethernet/google/gve/gve.h 3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts") 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/ https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/ Adjacent changes: net/can/isotp.c 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()") 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Signed-off-by: Jakub Kicinski

ethtool: reset #lanes when lanes is omitted

2023-04-05T01:57:10Z

If the number of lanes was forced and then subsequently the user omits this parameter, the ksettings->lanes is reset. The driver should then reset the number of lanes to the device's default for the specified speed. However, although the ksettings->lanes is set to 0, the mod variable is not set to true to indicate the driver and userspace should be notified of the changes. The consequence is that the same ethtool operation will produce different results based on the initial state. If the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: on then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off While if the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off This patch fixes this behavior. Omitting lanes will always results in the driver choosing the default lane width for the chosen speed. In this scenario, regardless of the initial state, the end state will be, e.g., $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Signed-off-by: Andy Roulin Reviewed-by: Danielle Ratson Reviewed-by: Ido Schimmel Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com Signed-off-by: Jakub Kicinski

ipv6: Remove in6addr_any alternatives.

2023-03-29T07:22:52Z

Some code defines the IPv6 wildcard address as a local variable and use it with memcmp() or ipv6_addr_equal(). Let's use in6addr_any and ipv6_addr_any() instead. Signed-off-by: Kuniyuki Iwashima Reviewed-by: Mark Bloch Reviewed-by: David Ahern Signed-off-by: David S. Miller

ethtool: Add support for configuring tx_push_buf_len

2023-03-28T02:49:58Z

This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski Signed-off-by: Shay Agroskin Signed-off-by: Jakub Kicinski

net: ethtool: fix __ethtool_dev_mm_supported() implementation

2023-02-21T17:05:01Z

The MAC Merge layer is supported when ops->get_mm() returns 0. The implementation was changed during review, and in this process, a bug was introduced. Link: https://lore.kernel.org/netdev/20230111161706.1465242-5-vladimir.oltean@nxp.com/ Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Signed-off-by: Vladimir Oltean Reviewed-by: Ferenc Fejes Link: https://lore.kernel.org/all/20230220122343.1156614-2-vladimir.oltean@nxp.com/ Signed-off-by: Jakub Kicinski

ethtool: pse-pd: Fix double word in comments

2023-02-21T17:02:13Z

Remove the repeated word "for" in comments. Signed-off-by: Bo Liu Reviewed-by: Oleksij Rempel Link: https://lore.kernel.org/r/20230221083036.2414-1-liubo03@inspur.com Signed-off-by: Jakub Kicinski