linux/net/ipv4/ip_input.c, branch v5.10

bpf: Add socket assign support

2020-03-30T20:45:04Z

Add support for TPROXY via a new bpf helper, bpf_sk_assign(). This helper requires the BPF program to discover the socket via a call to bpf_sk*_lookup_*(), then pass this socket to the new helper. The helper takes its own reference to the socket in addition to any existing reference that may or may not currently be obtained for the duration of BPF processing. For the destination socket to receive the traffic, the traffic must be routed towards that socket via local route. The simplest example route is below, but in practice you may want to route traffic more narrowly (eg by CIDR): $ ip route add local default dev lo This patch avoids trying to introduce an extra bit into the skb->sk, as that would require more invasive changes to all code interacting with the socket to ensure that the bit is handled correctly, such as all error-handling cases along the path from the helper in BPF through to the orphan path in the input. Instead, we opt to use the destructor variable to switch on the prefetch of the socket. Signed-off-by: Joe Stringer Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz

ipv4: use dst hint for ipv4 list receive

2019-11-21T22:45:55Z

This is alike the previous change, with some additional ipv4 specific quirk. Even when using the route hint we still have to do perform additional per packet checks about source address validity: a new helper is added to wrap them. Hints are explicitly disabled if the destination is a local broadcast, that keeps the code simple and local broadcast are a slower path anyway. UDP flood performances vs recvmmsg() receiver: vanilla patched delta Kpps Kpps % 1683 1871 +11 In the worst case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - re-enable hints for forward v2 -> v3: - really fix build (sic) and hint usage check - use fib4_has_custom_rules() helpers (David A.) - add ip_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem) v1 -> v2: - fix build issue with !CONFIG_IP_MULTIPLE_TABLES Signed-off-by: Paolo Abeni Reviewed-by: David Ahern Signed-off-by: David S. Miller

inet: do not call sublist_rcv on empty list

2019-10-30T00:54:29Z

syzbot triggered struct net NULL deref in NF_HOOK_LIST: RIP: 0010:NF_HOOK_LIST include/linux/netfilter.h:331 [inline] RIP: 0010:ip6_sublist_rcv+0x5c9/0x930 net/ipv6/ip6_input.c:292 ipv6_list_rcv+0x373/0x4b0 net/ipv6/ip6_input.c:328 __netif_receive_skb_list_ptype net/core/dev.c:5274 [inline] Reason: void ipv6_list_rcv(struct list_head *head, struct packet_type *pt, struct net_device *orig_dev) [..] list_for_each_entry_safe(skb, next, head, list) { /* iterates list */ skb = ip6_rcv_core(skb, dev, net); /* ip6_rcv_core drops skb -> NULL is returned */ if (skb == NULL) continue; [..] } /* sublist is empty -> curr_net is NULL */ ip6_sublist_rcv(&sublist, curr_dev, curr_net); Before the recent change NF_HOOK_LIST did a list iteration before struct net deref, i.e. it was a no-op in the empty list case. List iteration now happens after *net deref, causing crash. Follow the same pattern as the ip(v6)_list_rcv loop and add a list_empty test for the final sublist dispatch too. Cc: Edward Cree Reported-by: syzbot+c54f457cad330e57e967@syzkaller.appspotmail.com Fixes: ca58fbe06c54 ("netfilter: add and use nf_hook_slow_list()") Signed-off-by: Florian Westphal Tested-by: Leon Romanovsky Tested-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

netfilter: drop bridge nf reset from nf_reset

2019-10-01T16:42:15Z

commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

net: use indirect calls helpers at early demux stage

2019-05-05T17:38:04Z

So that we avoid another indirect call per RX packet, if early demux is enabled. Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

net: use indirect calls helpers for L3 handler hooks

2019-05-05T17:38:04Z

So that we avoid another indirect call per RX packet in the common case. Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller

vrf: check accept_source_route on the original netdevice

2019-04-01T17:44:58Z

Configuration check to accept source route IP options should be made on the incoming netdevice when the skb->dev is an l3mdev master. The route lookup for the source route next hop also needs the incoming netdev. v2->v3: - Simplify by passing the original netdevice down the stack (per David Ahern). Signed-off-by: Stephen Suryaputra Reviewed-by: David Ahern Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-03-02T20:54:35Z

ipv4: Pass original device to ip_rcv_finish_core

2019-02-28T05:44:20Z

ip_route_input_rcu expects the original ingress device (e.g., for proper multicast handling). The skb->dev can be changed by l3mdev_ip_rcv, so dev needs to be saved prior to calling it. This was the behavior prior to the listify changes. Fixes: 5fa12739a53d0 ("net: ipv4: listify ip_rcv_finish") Cc: Edward Cree Signed-off-by: David Ahern Signed-off-by: David S. Miller