linux/net/ipv4/netfilter, branch v5.6

proc: convert everything to "struct proc_ops"

2020-02-04T03:05:26Z

The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

netfilter: arp_tables: init netns pointer in xt_tgdtor_param struct

2020-01-13T18:22:10Z

An earlier commit (1b789577f655060d98d20e, "netfilter: arp_tables: init netns pointer in xt_tgchk_param struct") fixed missing net initialization for arptables, but turns out it was incomplete. We can get a very similar struct net NULL deref during error unwinding: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:xt_rateest_put+0xa1/0x440 net/netfilter/xt_RATEEST.c:77 xt_rateest_tg_destroy+0x72/0xa0 net/netfilter/xt_RATEEST.c:175 cleanup_entry net/ipv4/netfilter/arp_tables.c:509 [inline] translate_table+0x11f4/0x1d80 net/ipv4/netfilter/arp_tables.c:587 do_replace net/ipv4/netfilter/arp_tables.c:981 [inline] do_arpt_set_ctl+0x317/0x650 net/ipv4/netfilter/arp_tables.c:1461 Also init the netns pointer in xt_tgdtor_param struct. Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: syzbot+91bdd8eece0f6629ec8b@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

netfilter: arp_tables: init netns pointer in xt_tgchk_param struct

2019-12-30T12:09:04Z

We get crash when the targets checkentry function tries to make use of the network namespace pointer for arptables. When the net pointer got added back in 2010, only ip/ip6/ebtables were changed to initialize it, so arptables has this set to NULL. This isn't a problem for normal arptables because no existing arptables target has a checkentry function that makes use of par->net. However, direct users of the setsockopt interface can provide any target they want as long as its registered for ARP or UNPSEC protocols. syzkaller managed to send a semi-valid arptables rule for RATEEST target which is enough to trigger NULL deref: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109 [..] xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019 check_target net/ipv4/netfilter/arp_tables.c:399 [inline] find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline] translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline] do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456 Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: syzbot+d7358a458d8a81aee898@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Acked-by: Cong Wang Signed-off-by: Pablo Neira Ayuso

netfilter: nf_flow_table_offload: add IPv6 support

2019-11-15T22:44:47Z

Add nf_flow_rule_route_ipv6() and use it from the IPv6 and the inet flowtable type definitions. Rename the nf_flow_rule_route() function to nf_flow_rule_route_ipv4(). Adjust maximum number of actions, which now becomes 16 to leave sufficient room for the IPv6 address mangling for NAT. Signed-off-by: Pablo Neira Ayuso

netfilter: nf_flow_table: hardware offload support

2019-11-13T03:42:26Z

This patch adds the dataplane hardware offload to the flowtable infrastructure. Three new flags represent the hardware state of this flow: * FLOW_OFFLOAD_HW: This flow entry resides in the hardware. * FLOW_OFFLOAD_HW_DYING: This flow entry has been scheduled to be remove from hardware. This might be triggered by either packet path (via TCP RST/FIN packet) or via aging. * FLOW_OFFLOAD_HW_DEAD: This flow entry has been already removed from the hardware, the software garbage collector can remove it from the software flowtable. This patch supports for: * IPv4 only. * Aging via FLOW_CLS_STATS, no packet and byte counter synchronization at this stage. This patch also adds the action callback that specifies how to convert the flow entry into the flow_rule object that is passed to the driver. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

netfilter: nf_tables: add flowtable offload control plane

2019-11-13T03:42:26Z

This patch adds the NFTA_FLOWTABLE_FLAGS attribute that allows users to specify the NF_FLOWTABLE_HW_OFFLOAD flag. This patch also adds a new setup interface for the flowtable type to perform the flowtable offload block callback configuration. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

icmp: remove duplicate code

2019-11-05T22:03:11Z

The same code which recognizes ICMP error packets is duplicated several times. Use the icmp_is_err() and icmpv6_is_err() helpers instead, which do the same thing. ip_multipath_l3_keys() and tcf_nat_act() didn't check for all the error types, assume that they should instead. Signed-off-by: Matteo Croce Signed-off-by: David S. Miller

netfilter: drop bridge nf reset from nf_reset

2019-10-01T16:42:15Z

commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

netfilter: fix coding-style errors.

2019-09-13T09:39:38Z

Several header-files, Kconfig files and Makefiles have trailing white-space. Remove it. In netfilter/Kconfig, indent the type of CONFIG_NETFILTER_NETLINK_ACCT correctly. There are semicolons at the end of two function definitions in include/net/netfilter/nf_conntrack_acct.h and include/net/netfilter/nf_conntrack_ecache.h. Remove them. Fix indentation in nf_conntrack_l4proto.h. Signed-off-by: Jeremy Sowden Signed-off-by: Pablo Neira Ayuso

netfilter: synproxy: rename mss synproxy_options field

2019-08-03T16:39:08Z

After introduce "mss_encode" field in the synproxy_options struct the field "mss" is a little confusing. It has been renamed to "mss_option". Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso