linux/net/ipv6, branch v6.4

Merge tag 'ipsec-2023-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

2023-06-20T12:33:50Z

ipsec-2023-06-20

xfrm: Linearize the skb after offloading if needed.

2023-06-16T08:29:50Z

With offloading enabled, esp_xmit() gets invoked very late, from within validate_xmit_xfrm() which is after validate_xmit_skb() validates and linearizes the skb if the underlying device does not support fragments. esp_output_tail() may add a fragment to the skb while adding the auth tag/ IV. Devices without the proper support will then send skb->data points to with the correct length so the packet will have garbage at the end. A pcap sniffer will claim that the proper data has been sent since it parses the skb properly. It is not affected with INET_ESP_OFFLOAD disabled. Linearize the skb after offloading if the sending hardware requires it. It was tested on v4, v6 has been adopted. Fixes: 7785bba299a8d ("esp: Add a software GRO codepath") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Steffen Klassert

udplite: Print deprecation notice.

2023-06-15T22:08:58Z

Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs when a UDP-Lite socket tries to allocate a buffer under memory pressure. Someone should have stumbled on the bug much earlier if UDP-Lite had been used in a real app. Also, we do not always need a large UDP-Lite workload to hit the bug since UDP and UDP-Lite share the same memory accounting limit. Removing UDP-Lite would simplify UDP code removing a bunch of conditionals in fast path. Let's add a deprecation notice when UDP-Lite socket is created and schedule its removal to 2025. Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/ [0] Signed-off-by: Kuniyuki Iwashima Signed-off-by: Jakub Kicinski

xfrm: fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets

2023-06-09T06:16:34Z

Before Linux v5.8 an AF_INET6 SOCK_DGRAM (udp/udplite) socket with SOL_UDP, UDP_ENCAP, UDP_ENCAP_ESPINUDP{,_NON_IKE} enabled would just unconditionally use xfrm4_udp_encap_rcv(), afterwards such a socket would use the newly added xfrm6_udp_encap_rcv() which only handles IPv6 packets. Cc: Sabrina Dubroca Cc: Steffen Klassert Cc: Jakub Kicinski Cc: Benedict Wong Cc: Yan Yan Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") Signed-off-by: Maciej Żenczykowski Reviewed-by: Simon Horman Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert

ping6: Fix send to link-local addresses with VRF.

2023-06-09T01:59:57Z

Ping sockets can't send packets when they're bound to a VRF master device and the output interface is set to a slave device. For example, when net.ipv4.ping_group_range is properly set, so that ping6 can use ping sockets, the following kind of commands fails: $ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1 What happens is that sk->sk_bound_dev_if is set to the VRF master device, but 'oif' is set to the real output device. Since both are set but different, ping_v6_sendmsg() sees their value as inconsistent and fails. Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if. This fixes the following kselftest failure: $ ./fcnal-test.sh -t ipv6_ping [...] TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL] Reported-by: Mirsad Todorovac Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/ Tested-by: Mirsad Todorovac Fixes: 5e457896986e ("net: ipv6: Fix ping to link-local addresses.") Signed-off-by: Guillaume Nault Reviewed-by: David Ahern Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com Signed-off-by: Jakub Kicinski

ipv6: rpl: Fix Route of Death.

2023-06-07T03:59:08Z

A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156. The Source Routing Header (SRH) has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n]. The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows: 1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address. When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI. OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE. Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes. Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0]. Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1. [0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b Modules linked in: Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski

net/ipv6: convert skip_notify_on_dev_down sysctl to u8

2023-06-03T05:55:43Z

Save a bit a space, and could help future sysctls to use the same pattern. Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Acked-by: Matthieu Baerts Signed-off-by: Jakub Kicinski

udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().

2023-05-25T08:51:58Z

syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni

ipv6: Fix out-of-bounds access in ipv6_find_tlv()

2023-05-24T07:43:39Z

optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61a40432509 ("[IPV6]: Find option offset by type.") Signed-off-by: Gavrilov Ilia Reviewed-by: Jiri Pirko Reviewed-by: David Ahern Signed-off-by: David S. Miller

ipv{4,6}/raw: fix output xfrm lookup wrt protocol

2023-05-23T13:38:59Z

With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the protocol field of the flow structure, build by raw_sendmsg() / rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy lookup when some policies are defined with a protocol in the selector. For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to specify the protocol. Just accept all values for IPPROTO_RAW socket. For ipv4, the sin_port field of 'struct sockaddr_in' could not be used without breaking backward compatibility (the value of this field was never checked). Let's add a new kind of control message, so that the userland could specify which protocol is used. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Signed-off-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com Signed-off-by: Paolo Abeni