linux/net/openvswitch/flow.c, branch v3.19

openvswitch: Consistently include VLAN header in flow and port stats.

2015-01-02T21:14:20Z

Until now, when VLAN acceleration was in use, the bytes of the VLAN header were not included in port or flow byte counters. They were however included when VLAN acceleration was not used. This commit corrects the inconsistency, by always including the VLAN header in byte counters. Previous discussion at http://openvswitch.org/pipermail/dev/2014-December/049521.html Reported-by: Motonori Shindo Signed-off-by: Ben Pfaff Reviewed-by: Flavio Leitner Acked-by: Pravin B Shelar Signed-off-by: David S. Miller

openvswitch: Add support for OVS_FLOW_ATTR_PROBE.

2014-11-10T02:58:44Z

This new flag is useful for suppressing error logging while probing for datapath features using flow commands. For backwards compatibility reasons the commands are executed normally, but error logging is suppressed. Signed-off-by: Jarno Rajahalme Signed-off-by: Pravin B Shelar

openvswitch: Constify various function arguments

2014-11-10T02:58:44Z

Help produce better optimized code. Signed-off-by: Thomas Graf Signed-off-by: Pravin B Shelar

openvswitch: Add basic MPLS support to kernel

2014-11-06T07:52:33Z

Allow datapath to recognize and extract MPLS labels into flow keys and execute actions which push, pop, and set labels on packets. Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer. Cc: Ravi K Cc: Leo Alterman Cc: Isaku Yamahata Cc: Joe Stringer Signed-off-by: Simon Horman Signed-off-by: Jesse Gross Signed-off-by: Pravin B Shelar

openvswitch: Set flow-key members.

2014-10-18T03:54:02Z

This patch adds missing memset which are required to initialize flow key member. For example for IP flow we need to initialize ip.frag for all cases. Found by inspection. This bug is introduced by commit 0714812134d7dcadeb7ecfbfeb18788aa7e1eaac ("openvswitch: Eliminate memset() from flow_extract"). Signed-off-by: Pravin B Shelar Signed-off-by: David S. Miller

openvswitch: fix a use after free

2014-10-17T20:21:53Z

pskb_may_pull() called by arphdr_ok can change skb->data, so put the arp setting after arphdr_ok to avoid the use the freed memory Fixes: 0714812134d7d ("openvswitch: Eliminate memset() from flow_extract.") Cc: Jesse Gross Cc: Eric Dumazet Signed-off-by: Li RongQing Acked-by: Jesse Gross Signed-off-by: David S. Miller

openvswitch: Add support for Geneve tunneling.

2014-10-06T04:32:21Z

The Openvswitch implementation is completely agnostic to the options that are in use and can handle newly defined options without further work. It does this by simply matching on a byte array of options and allowing userspace to setup flows on this array. Signed-off-by: Jesse Gross Singed-off-by: Ansis Atteka Signed-off-by: Andy Zhou Acked-by: Thomas Graf Acked-by: Pravin B Shelar Signed-off-by: David S. Miller

openvswitch: Wrap struct ovs_key_ipv4_tunnel in a new structure.

2014-10-06T04:32:20Z

Currently, the flow information that is matched for tunnels and the tunnel data passed around with packets is the same. However, as additional information is added this is not necessarily desirable, as in the case of pointers. This adds a new structure for tunnel metadata which currently contains only the existing struct. This change is purely internal to the kernel since the current OVS_KEY_ATTR_IPV4_TUNNEL is simply a compressed version of OVS_KEY_ATTR_TUNNEL that is translated at flow setup. Signed-off-by: Jesse Gross Signed-off-by: Andy Zhou Acked-by: Pravin B Shelar Signed-off-by: David S. Miller

openvswitch: Eliminate memset() from flow_extract.

2014-10-06T04:32:20Z

As new protocols are added, the size of the flow key tends to increase although few protocols care about all of the fields. In order to optimize this for hashing and matching, OVS uses a variable length portion of the key. However, when fields are extracted from the packet we must still zero out the entire key. This is no longer necessary now that OVS implements masking. Any fields (or holes in the structure) which are not part of a given protocol will be by definition not part of the mask and zeroed out during lookup. Furthermore, since masking already uses variable length keys this zeroing operation automatically benefits as well. In principle, the only thing that needs to be done at this point is remove the memset() at the beginning of flow. However, some fields assume that they are initialized to zero, which now must be done explicitly. In addition, in the event of an error we must also zero out corresponding fields to signal that there is no valid data present. These increase the total amount of code but very little of it is executed in non-error situations. Removing the memset() reduces the profile of ovs_flow_extract() from 0.64% to 0.56% when tested with large packets on a 10G link. Suggested-by: Pravin Shelar Signed-off-by: Jesse Gross Signed-off-by: Andy Zhou Acked-by: Pravin B Shelar Signed-off-by: David S. Miller

openvswitch: Add recirc and hash action.

2014-09-16T06:28:14Z

Recirc action allows a packet to reenter openvswitch processing. currently openvswitch lookup flow for packet received and execute set of actions on that packet, with help of recirc action we can process/modify the packet and recirculate it back in openvswitch for another pass. OVS hash action calculates 5-tupple hash and set hash in flow-key hash. This can be used along with recirculation for distributing packets among different ports for bond devices. For example: OVS bonding can use following actions: Match on: bond flow; Action: hash, recirc(id) Match on: recirc-id == id and hash lower bits == a; Action: output port_bond_a Signed-off-by: Andy Zhou Acked-by: Jesse Gross Signed-off-by: Pravin B Shelar