linux/net/wireless, branch v6.13

Merge tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless

2024-12-11T02:44:25Z

Johannes Berg says: ==================== A small set of fixes: - avoid CSA warnings during link removal (by changing link bitmap after remove) - fix # of spatial streams initialisation - fix queues getting stuck in some CSA cases and resume failures - fix interface address when switching monitor mode - fix MBSS change flags 32-bit stack corruption - more UBSAN __counted_by "fixes" ... - fix link ID netlink validation * tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: sme: init n_channels before channels[] access wifi: mac80211: fix station NSS capability initialization order wifi: mac80211: fix vif addr when switching from monitor to station wifi: mac80211: fix a queue stall in certain cases of CSA wifi: mac80211: wake the queues in case of failure in resume wifi: cfg80211: clear link ID from bitmap during link delete after clean up wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon wifi: mac80211: fix mbss changed flags corruption on 32 bit systems wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one ==================== Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski

wifi: cfg80211: sme: init n_channels before channels[] access

2024-12-06T09:45:22Z

With the __counted_by annocation in cfg80211_scan_request struct, the "n_channels" struct member must be set before accessing the "channels" array. Failing to do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE. Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Signed-off-by: Haoyu Li Link: https://patch.msgid.link/20241203152049.348806-1-lihaoyu499@gmail.com Signed-off-by: Johannes Berg

wifi: cfg80211: clear link ID from bitmap during link delete after clean up

2024-12-03T10:28:20Z

Currently, during link deletion, the link ID is first removed from the valid_links bitmap before performing any clean-up operations. However, some functions require the link ID to remain in the valid_links bitmap. One such example is cfg80211_cac_event(). The flow is - nl80211_remove_link() cfg80211_remove_link() ieee80211_del_intf_link() ieee80211_vif_set_links() ieee80211_vif_update_links() ieee80211_link_stop() cfg80211_cac_event() cfg80211_cac_event() requires link ID to be present but it is cleared already in cfg80211_remove_link(). Ultimately, WARN_ON() is hit. Therefore, clear the link ID from the bitmap only after completing the link clean-up. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20241121-mlo_dfs_fix-v2-1-92c3bf7ab551@quicinc.com Signed-off-by: Johannes Berg

wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one

2024-12-03T10:25:41Z

Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one. One crash stack for demonstration: ================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508 CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd Update the policy to ensure correct validation. Fixes: 7b0a0e3c3a88 ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by: Lin Ma Suggested-by: Cengiz Can Link: https://patch.msgid.link/20241130170526.96698-1-linma@zju.edu.cn Signed-off-by: Johannes Berg

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2024-11-14T02:35:19Z

Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski

net: convert to nla_get_*_default()

2024-11-11T18:32:06Z

Most of the original conversion is from the spatch below, but I edited some and left out other instances that were either buggy after conversion (where default values don't fit into the type) or just looked strange. @@ expression attr, def; expression val; identifier fn =~ "^nla_get_.*"; fresh identifier dfn = fn ## "_default"; @@ ( -if (attr) - val = fn(attr); -else - val = def; +val = dfn(attr, def); | -if (!attr) - val = def; -else - val = fn(attr); +val = dfn(attr, def); | -if (!attr) - return def; -return fn(attr); +return dfn(attr, def); | -attr ? fn(attr) : def +dfn(attr, def) | -!attr ? def : fn(attr) +dfn(attr, def) ) Signed-off-by: Johannes Berg Reviewed-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid Signed-off-by: Jakub Kicinski

wifi: cfg80211: Fix an error handling path in nl80211_start_ap()

2024-11-07T13:40:44Z

All error handling paths go to "out", except this one. Before the commit in Fixes, error in the previous code would also end to "out", freeing the memory. Move the code up to avoid the leak. Fixes: 62262dd00c31 ("wifi: cfg80211: disallow SMPS in AP mode") Signed-off-by: Christophe JAILLET Link: https://patch.msgid.link/eae54ce066d541914f272b10cab7b263c08eced3.1729956868.git.christophe.jaillet@wanadoo.fr [move code, update commit message] Signed-off-by: Johannes Berg

wifi: nl80211: fix bounds checker error in nl80211_parse_sched_scan

2024-11-07T13:38:33Z

The channels array in the cfg80211_scan_request has a __counted_by attribute attached to it, which points to the n_channels variable. This attribute is used in bounds checking, and if it is not set before the array is filled, then the bounds sanitizer will issue a warning or a kernel panic if CONFIG_UBSAN_TRAP is set. This patch sets the size of allocated memory as the initial value for n_channels. It is updated with the actual number of added elements after the array is filled. Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate") Cc: stable@vger.kernel.org Signed-off-by: Aleksei Vetrov Reviewed-by: Jeff Johnson Link: https://patch.msgid.link/20241029-nl80211_parse_sched_scan-bounds-checker-fix-v2-1-c804b787341f@google.com Signed-off-by: Johannes Berg

wifi: cfg80211: Remove the Medium Synchronization Delay validity check

2024-11-07T13:38:18Z

Currently, when the driver attempts to connect to an AP MLD with multiple APs, the cfg80211_mlme_check_mlo_compat() function requires the Medium Synchronization Delay values from different APs of the same AP MLD to be equal, which may result in connection failures. This is because when the driver receives a multi-link probe response from an AP MLD with multiple APs, cfg80211 updates the Elements for each AP based on the multi-link probe response. If the Medium Synchronization Delay is set in the multi-link probe response, the Elements for each AP belonging to the same AP MLD will have the Medium Synchronization Delay set simultaneously. If non-multi-link probe responses are received from different APs of the same MLD AP, cfg80211 will still update the Elements based on the non-multi-link probe response. Since the non-multi-link probe response does not set the Medium Synchronization Delay (IEEE 802.11be-2024-35.3.4.4), if the Elements from a non-multi-link probe response overwrite those from a multi-link probe response that has set the Medium Synchronization Delay, the Medium Synchronization Delay values for APs belonging to the same AP MLD will not be equal. This discrepancy causes the cfg80211_mlme_check_mlo_compat() function to fail, leading to connection failures. Commit ccb964b4ab16 ("wifi: cfg80211: validate MLO connections better") did not take this into account. To address this issue, remove this validity check. Fixes: ccb964b4ab16 ("wifi: cfg80211: validate MLO connections better") Signed-off-by: Lingbo Kong Link: https://patch.msgid.link/20241031134223.970-1-quic_lingbok@quicinc.com Signed-off-by: Johannes Berg