linux/samples/bpf, branch v5.3

samples/bpf: build with -D__TARGET_ARCH_$(SRCARCH)

2019-07-15T21:13:17Z

While $ARCH can be relatively flexible (see Makefile and tools/scripts/Makefile.arch), $SRCARCH always corresponds to a directory name under arch/. Therefore, build samples with -D__TARGET_ARCH_$(SRCARCH), since that matches the expectations of bpf_helpers.h. Signed-off-by: Ilya Leoshkevich Acked-by: Vasily Gorbik Acked-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-07-09T02:48:57Z

Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2019-07-03T19:09:00Z

Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: David S. Miller

samples/bpf: fix tcp_bpf.readme detach command

2019-07-03T14:52:02Z

Copy-paste, should be detach, not attach. Signed-off-by: Stanislav Fomichev Acked-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Signed-off-by: Daniel Borkmann

samples/bpf: add sample program that periodically dumps TCP stats

2019-07-03T14:52:02Z

Uses new RTT callback to dump stats every second. $ mkdir -p /tmp/cgroupv2 $ mount -t cgroup2 none /tmp/cgroupv2 $ mkdir -p /tmp/cgroupv2/foo $ echo $$ >> /tmp/cgroupv2/foo/cgroup.procs $ bpftool prog load ./tcp_dumpstats_kern.o /sys/fs/bpf/tcp_prog $ bpftool cgroup attach /tmp/cgroupv2/foo sock_ops pinned /sys/fs/bpf/tcp_prog $ bpftool prog tracelog $ # run neper/netperf/etc Used neper to compare performance with and without this program attached and didn't see any noticeable performance impact. Sample output: -0 [015] ..s. 2074.128800: 0: dsack_dups=0 delivered=242526 -0 [015] ..s. 2074.128808: 0: delivered_ce=0 icsk_retransmits=0 -0 [015] ..s. 2075.130133: 0: dsack_dups=0 delivered=323599 -0 [015] ..s. 2075.130138: 0: delivered_ce=0 icsk_retransmits=0 -0 [005] .Ns. 2076.131440: 0: dsack_dups=0 delivered=404648 -0 [005] .Ns. 2076.131447: 0: delivered_ce=0 icsk_retransmits=0 Cc: Eric Dumazet Cc: Priyaranjan Jha Cc: Yuchung Cheng Cc: Soheil Hassas Yeganeh Acked-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann

bpf: Add support for fq's EDT to HBM

2019-07-03T13:03:00Z

Adds support for fq's Earliest Departure Time to HBM (Host Bandwidth Manager). Includes a new BPF program supporting EDT, and also updates corresponding programs. It will drop packets with an EDT of more than 500us in the future unless the packet belongs to a flow with less than 2 packets in flight. This is done so each flow has at least 2 packets in flight, so they will not starve, and also to help prevent delayed ACK timeouts. It will also work with ECN enabled traffic, where the packets will be CE marked if their EDT is more than 50us in the future. The table below shows some performance numbers. The flows are back to back RPCS. One server sending to another, either 2 or 4 flows. One flow is a 10KB RPC, the rest are 1MB RPCs. When there are more than one flow of a given RPC size, the numbers represent averages. The rate limit applies to all flows (they are in the same cgroup). Tests ending with "-edt" ran with the new BPF program supporting EDT. Tests ending with "-hbt" ran on top HBT qdisc with the specified rate (i.e. no HBM). The other tests ran with the HBM BPF program included in the HBM patch-set. EDT has limited value when using DCTCP, but it helps in many cases when using Cubic. It usually achieves larger link utilization and lower 99% latencies for the 1MB RPCs. HBM ends up queueing a lot of packets with its default parameter values, reducing the goodput of the 10KB RPCs and increasing their latency. Also, the RTTs seen by the flows are quite large. Aggr 10K 10K 10K 1MB 1MB 1MB Limit rate drops RTT rate P90 P99 rate P90 P99 Test rate Flows Mbps % us Mbps us us Mbps ms ms -------- ---- ----- ---- ----- --- ---- ---- ---- ---- ---- ---- cubic 1G 2 904 0.02 108 257 511 539 647 13.4 24.5 cubic-edt 1G 2 982 0.01 156 239 656 967 743 14.0 17.2 dctcp 1G 2 977 0.00 105 324 408 744 653 14.5 15.9 dctcp-edt 1G 2 981 0.01 142 321 417 811 660 15.7 17.0 cubic-htb 1G 2 919 0.00 1825 40 2822 4140 879 9.7 9.9 cubic 200M 2 155 0.30 220 81 532 655 74 283 450 cubic-edt 200M 2 188 0.02 222 87 1035 1095 101 84 85 dctcp 200M 2 188 0.03 111 77 912 939 111 76 325 dctcp-edt 200M 2 188 0.03 217 74 1416 1738 114 76 79 cubic-htb 200M 2 188 0.00 5015 8 14ms 15ms 180 48 50 cubic 1G 4 952 0.03 110 165 516 546 262 38 154 cubic-edt 1G 4 973 0.01 190 111 1034 1314 287 65 79 dctcp 1G 4 951 0.00 103 180 617 905 257 37 38 dctcp-edt 1G 4 967 0.00 163 151 732 1126 272 43 55 cubic-htb 1G 4 914 0.00 3249 13 7ms 8ms 300 29 34 cubic 5G 4 4236 0.00 134 305 490 624 1310 10 17 cubic-edt 5G 4 4865 0.00 156 306 425 759 1520 10 16 dctcp 5G 4 4936 0.00 128 485 221 409 1484 7 9 dctcp-edt 5G 4 4924 0.00 148 390 392 623 1508 11 26 v1 -> v2: Incorporated Andrii's suggestions v2 -> v3: Incorporated Yonghong's suggestions v3 -> v4: Removed credit update that is not needed Signed-off-by: Lawrence Brakmo Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann

xsk: Change the default frame size to 4096 and allow controlling it

2019-06-27T20:53:26Z

The typical XDP memory scheme is one packet per page. Change the AF_XDP frame size in libbpf to 4096, which is the page size on x86, to allow libbpf to be used with the drivers with the packet-per-page scheme. Add a command line option -f to xdpsock to allow to specify a custom frame size. Signed-off-by: Maxim Mikityanskiy Signed-off-by: Tariq Toukan Acked-by: Saeed Mahameed Signed-off-by: Daniel Borkmann

samples: bpf: make the use of xdp samples consistent

2019-06-26T13:39:15Z

Currently, each xdp samples are inconsistent in the use. Most of the samples fetch the interface with it's name. (ex. xdp1, xdp2skb, xdp_redirect_cpu, xdp_sample_pkts, etc.) But some of the xdp samples are fetching the interface with ifindex by command argument. This commit enables xdp samples to fetch interface with it's name without changing the original index interface fetching. ( fetching in the same way as xdp_sample_pkts_user.c does.) Signed-off-by: Daniel T. Lee Acked-by: Toke Høiland-Jørgensen Acked-by: Jesper Dangaard Brouer Acked-by: Song Liu Signed-off-by: Daniel Borkmann

samples: bpf: Remove bpf_debug macro in favor of bpf_printk

2019-06-25T01:18:30Z

ibumad example was implementing the bpf_debug macro which is exactly the same as the bpf_printk macro available in bpf_helpers.h. This change makes use of bpf_printk instead of bpf_debug. Signed-off-by: Michal Rostecki Acked-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov

samples/bpf: xdp_redirect, correctly get dummy program id

2019-06-24T13:56:56Z

When we terminate xdp_redirect, it ends up with following message: "Program on iface OUT changed, not removing" This results in dummy prog still attached to OUT interface. It is because signal handler checks if the programs are the same that we had attached. But while fetching dummy_prog_id, current code uses prog_fd instead of dummy_prog_fd. This patch passes the correct fd. Fixes: 3b7a8ec2dec3 ("samples/bpf: Check the prog id before exiting") Signed-off-by: Prashant Bhole Acked-by: Toke Høiland-Jørgensen Signed-off-by: Daniel Borkmann