linux/scripts/Makefile.lib, branch v2.6.30

kbuild: introduce subdir-ccflags-y

2009-04-19T09:12:12Z

Following patch introduce support for setting options to gcc that has effect for current directory and all subdirectories. The typical use case are an architecture or a subsystem that decide to cover all files with -Werror. Today alpha, mips and sparc uses -Werror in almost all their Makefile- with subdir-ccflag-y it is now simpler to do so as only the top-level directories needs to be covered. Likewise if we decide to cover a full subsystem such as net/ with -Werror this is done by adding a single line to net/Makefile. Signed-off-by: Sam Ravnborg Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Thomas Gleixner

Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2

2009-03-27T16:28:43Z

Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar

dynamic debug: combine dprintk and dynamic printk

2009-03-24T23:38:26Z

This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman

bzip2/lzma: handle failures from bzip2 and lzma correctly

2009-01-04T23:53:35Z

Impact: Bug fix If bzip2 or lzma fails (for example, if they aren't installed on the system), we need to propagate the failure out to "make". However, they were masked by being followed by a semicolon. Signed-off-by: H. Peter Anvin

bzip2/lzma: library support for gzip, bzip2 and lzma decompression

2009-01-04T23:53:34Z

Impact: Replaces inflate.c with a wrapper around zlib_inflate; new library code This is the first part of the bzip2/lzma patch The bzip patch is based on an idea by Christian Ludwig, includes support for compressing the kernel with bzip2 or lzma rather than gzip. Both compressors give smaller sizes than gzip. Lzma's decompresses faster than bzip2. It also supports ramdisks and initramfs' compressed using these two compressors. The functionality has been successfully used for a couple of years by the udpcast project This version applies to "tip" kernel 2.6.28 This part contains: - changed inflate.c to accomodate rest of patch - implementation of bzip2 compression (not used at this stage yet) - implementation of lzma compression (not used at this stage yet) - Makefile routines to support bzip2 and lzma kernel compression Signed-off-by: Alain Knaff Signed-off-by: H. Peter Anvin

kbuild: expand -I in KBUILD_CPPFLAGS

2008-12-03T20:31:59Z

kbuild failed to expand include flags in KBUILD_CPPFLAGS resulting in code like this in arch Makefiles: ifeq ($(KBUILD_SRC),) KBUILD_CPPFLAGS += -Iinclude/foo else KBUILD_CPPFLAGS += -I$(srctree)/include/foo endif Move use of LINUXINCLUDE into Makefile.lib to allow us to expand -I directives of KBUILD_CPPFLAGS so we can avoid the above code. Signed-off-by: Sam Ravnborg

driver core: basic infrastructure for per-module dynamic debug messages

2008-10-16T16:24:47Z

Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, /dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, /dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: . . . : Name of the module in which the debug call resides : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 " > dynamic_printk/modules Disable a module: $echo "set enabled=0 " > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman

kbuild: create new CFLAGS_REMOVE_(basename).o option

2008-05-23T20:43:33Z

We currently have a way to add special CFLAGS to code, but we do not have a way to remove them if needed. With the case of ftrace, some files should simply not be profiled. Adding the -pg flag to these files is simply a waste, and adding "notrace" to each and every function is ugly. Currently we put in "Makefile turd" [1] to stop the compiler from adding -pg to certain files. This was clumsy and awkward. This patch now adds the revese of CFLAGS_(basename).o with CFLAGS_REMOVE_(basename).o. This allows developers to prevent certain CFLAGS from being used to compile files. For example, we can now do CFLAGS_REMOVE_string.o = -pg to remove the -pg option from the string.o file in the lib directory. Note: a space delimited list of options may be added to the REMOVE macro. [1] - what David Miller called the workaronud to remove -pg Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner

kbuild: implement modules.order

2008-01-28T22:14:35Z

When multiple built-in modules (especially drivers) provide the same capability, they're prioritized by link order specified by the order listed in Makefile. This implicit ordering is lost for loadable modules. When driver modules are loaded by udev, what comes first in modules.alias file is selected. However, the order in this file is indeterministic (depends on filesystem listing order of installed modules). This causes confusion. The solution is two-parted. This patch updates kbuild such that it generates and installs modules.order which contains the name of modules ordered according to Makefile. The second part is update to depmod such that it generates output files according to this file. Note that both obj-y and obj-m subdirs can contain modules and ordering information between those two are lost from beginning. Currently obj-y subdirs are put before obj-m subdirs. Sam Ravnborg cleaned up Makefile modifications and suggested using awk to remove duplicate lines from modules.order instead of using separate C program. Signed-off-by: Tejun Heo Acked-by: Greg Kroah-Hartman Cc: Bill Nottingham Cc: Rusty Russell Cc: Kay Sievers Cc: Jon Masters Signed-off-by: Sam Ravnborg

kbuild: introduce ccflags-y, asflags-y and ldflags-y

2007-10-15T20:25:06Z

Introduce ccflags-y, asflags-y and ldflags-y so we soon can deprecate use of EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS. This patch does not touch any in-tree users - thats next round. Lets get this committed first and then fix the users of the soon to be deprecated variants next. The rationale behind this change is to introduce support for makefile fragments like: ccflags-$(CONFIG_WHATEVER_DEBUG) := -DDEBUG As a replacement for the uglier: ifeq ($(CONFIG_WHATEVER_DEBUG),y) EXTRA_CFLAGS := -DDEBUG endif Signed-off-by: Sam Ravnborg