linux/scripts/Makefile.modfinal, branch v6.3

kbuild: rename cmd_$@ to savedcmd_$@ in *.cmd files

2023-01-22T14:43:33Z

The cmd-check macro compares $(cmd_$@) and $(cmd_$1), but a pitfall is that you cannot use cmd_ as the variable name for the command. For example, the following code will not work in the top Makefile or ./Kbuild. quiet_cmd_foo = GEN $@ cmd_foo = touch $@ targets += foo foo: FORCE $(call if_changed,foo) In this case, both $@ and $1 are expanded to 'foo', so $(cmd_check) is always empty. We do not need to use the same prefix for cmd_$@ and cmd_$1. Rename the former to savedcmd_$@. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier

kbuild: change module.order to list .o instead of .ko

2022-12-14T06:42:40Z

scripts/Makefile.build replaces the suffix .o with .ko, then scripts/Makefile.modpost calls the sed command to change .ko back to the original .o suffix. Instead of converting the suffixes back-and-forth, store the .o paths in modules.order, and replace it with .ko in 'make modules_install'. This avoids the unneeded sed command. Signed-off-by: Masahiro Yamada Reviewed-by: Luis Chamberlain

kbuild: add read-file macro

2022-12-13T13:29:10Z

Since GNU Make 4.2, $(file ...) supports the read operater '<', which is useful to read a file without forking a new process. No warning is shown even if the input file is missing. For older Make versions, it falls back to the cat command. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier Reviewed-by: Alexander Lobakin Tested-by: Alexander Lobakin

kbuild: do not sort after reading modules.order

2022-12-13T13:28:58Z

modules.order lists modules in the deterministic order (that is why "modules order"), and there is no duplication in the list. $(sort ) is pointless. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier

Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2022-10-10T19:00:45Z

Pull Kbuild updates from Masahiro Yamada: - Remove potentially incomplete targets when Kbuid is interrupted by SIGINT etc in case GNU Make may miss to do that when stderr is piped to another program. - Rewrite the single target build so it works more correctly. - Fix rpm-pkg builds with V=1. - List top-level subdirectories in ./Kbuild. - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms. - Avoid two different modules in lib/zstd/ having shared code, which potentially causes building the common code as build-in and modular back-and-forth. - Unify two modpost invocations to optimize the build process. - Remove head-y syntax in favor of linker scripts for placing particular sections in the head of vmlinux. - Bump the minimal GNU Make version to 3.82. - Clean up misc Makefiles and scripts. * tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits) docs: bump minimal GNU Make version to 3.82 ia64: simplify esi object addition in Makefile Revert "kbuild: Check if linker supports the -X option" kbuild: rebuild .vmlinux.export.o when its prerequisite is updated kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o zstd: Fixing mixed module-builtin objects kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols kallsyms: take the input file instead of reading stdin kallsyms: drop duplicated ignore patterns from kallsyms.c kbuild: reuse mksysmap output for kallsyms mksysmap: update comment about __crc_* kbuild: remove head-y syntax kbuild: use obj-y instead extra-y for objects placed at the head kbuild: hide error checker logs for V=1 builds kbuild: re-run modpost when it is updated kbuild: unify two modpost invocations kbuild: move vmlinux.o rule to the top Makefile kbuild: move .vmlinux.objs rule to Makefile.modpost kbuild: list sub-directories in ./Kbuild Makefile.compiler: replace cc-ifversion with compiler-specific macros ...

kbuild: unify two modpost invocations

2022-09-28T21:07:58Z

Currently, modpost is executed twice; first for vmlinux, second for modules. This commit merges them. Current build flow ================== 1) build obj-y and obj-m objects 2) link vmlinux.o 3) modpost for vmlinux 4) link vmlinux 5) modpost for modules 6) link modules (*.ko) The build steps 1) through 6) are serialized, that is, modules are built after vmlinux. You do not get benefits of parallel builds when scripts/link-vmlinux.sh is being run. New build flow ============== 1) build obj-y and obj-m objects 2) link vmlinux.o 3) modpost for vmlinux and modules 4a) link vmlinux 4b) link modules (*.ko) In the new build flow, modpost is invoked just once. vmlinux and modules are built in parallel. One exception is CONFIG_DEBUG_INFO_BTF_MODULES=y, where modules depend on vmlinux. Signed-off-by: Masahiro Yamada Tested-by: Nick Desaulniers Reviewed-by: Nicolas Schier

Kbuild: add Rust support

2022-09-28T07:02:20Z

Having most of the new files in place, we now enable Rust support in the build system, including `Kconfig` entries related to Rust, the Rust configuration printer and a few other bits. Reviewed-by: Kees Cook Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Reviewed-by: Greg Kroah-Hartman Co-developed-by: Alex Gaynor Signed-off-by: Alex Gaynor Co-developed-by: Finn Behrens Signed-off-by: Finn Behrens Co-developed-by: Adam Bratschi-Kaye Signed-off-by: Adam Bratschi-Kaye Co-developed-by: Wedson Almeida Filho Signed-off-by: Wedson Almeida Filho Co-developed-by: Michael Ellerman Signed-off-by: Michael Ellerman Co-developed-by: Sven Van Asbroeck Signed-off-by: Sven Van Asbroeck Co-developed-by: Gary Guo Signed-off-by: Gary Guo Co-developed-by: Boris-Chengbiao Zhou Signed-off-by: Boris-Chengbiao Zhou Co-developed-by: Boqun Feng Signed-off-by: Boqun Feng Co-developed-by: Douglas Su Signed-off-by: Douglas Su Co-developed-by: Dariusz Sosnowski Signed-off-by: Dariusz Sosnowski Co-developed-by: Antonio Terceiro Signed-off-by: Antonio Terceiro Co-developed-by: Daniel Xu Signed-off-by: Daniel Xu Co-developed-by: Björn Roy Baron Signed-off-by: Björn Roy Baron Co-developed-by: Martin Rodriguez Reboredo Signed-off-by: Martin Rodriguez Reboredo Signed-off-by: Miguel Ojeda

kbuild: do not create *.prelink.o for Clang LTO or IBT

2022-05-29T09:39:35Z

When CONFIG_LTO_CLANG=y, additional intermediate *.prelink.o is created for each module. Also, objtool is postponed until LLVM IR is converted to ELF. CONFIG_X86_KERNEL_IBT works in a similar way to postpone objtool until objects are merged together. This commit stops generating *.prelink.o, so the build flow will look similar with/without LTO. The following figures show how the LTO build currently works, and how this commit is changing it. Current build flow ================== [1] single-object module $(LD) $(CC) +objtool $(LD) foo.c --------------------> foo.o -----> foo.prelink.o -----> foo.ko (LLVM IR) (ELF) | (ELF) | foo.mod.o --/ (LLVM IR) [2] multi-object module $(LD) $(CC) $(AR) +objtool $(LD) foo1.c -----> foo1.o -----> foo.o -----> foo.prelink.o -----> foo.ko | (archive) (ELF) | (ELF) foo2.c -----> foo2.o --/ | (LLVM IR) foo.mod.o --/ (LLVM IR) One confusion is that foo.o in multi-object module is an archive despite of its suffix. New build flow ============== [1] single-object module Since there is only one object, there is no need to keep the LLVM IR. Use $(CC)+$(LD) to generate an ELF object in one build rule. When LTO is disabled, $(LD) is unneeded because $(CC) produces an ELF object. $(CC)+$(LD)+objtool $(LD) foo.c ----------------------------> foo.o ---------> foo.ko (ELF) | (ELF) | foo.mod.o --/ (LLVM IR) [2] multi-object module Previously, $(AR) was used to combine LLVM IR files into an archive, but there was no technical reason to do so. Use $(LD) to merge them into a single ELF object. $(LD) $(CC) +objtool $(LD) foo1.c ---------> foo1.o ---------> foo.o ---------> foo.ko | (ELF) | (ELF) foo2.c ---------> foo2.o ----/ | (LLVM IR) foo.mod.o --/ (LLVM IR) Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier Tested-by: Nathan Chancellor Reviewed-by: Sami Tolvanen Tested-by: Sedat Dilek # LLVM-14 (x86-64) Acked-by: Josh Poimboeuf

kbuild: Unify options for BTF generation for vmlinux and modules

2021-11-02T01:09:58Z

Using new PAHOLE_FLAGS variable to pass extra arguments to pahole for both vmlinux and modules BTF data generation. Adding new scripts/pahole-flags.sh script that detect and prints pahole options. [ fixed issues found by kernel test robot ] Signed-off-by: Jiri Olsa Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20211029125729.70002-1-jolsa@kernel.org

bpf: Enable TCP congestion control kfunc from modules

2021-10-06T00:07:41Z

This commit moves BTF ID lookup into the newly added registration helper, in a way that the bbr, cubic, and dctcp implementation set up their sets in the bpf_tcp_ca kfunc_btf_set list, while the ones not dependent on modules are looked up from the wrapper function. This lifts the restriction for them to be compiled as built in objects, and can be loaded as modules if required. Also modify Makefile.modfinal to call resolve_btfids for each module. Note that since kernel kfunc_ids never overlap with module kfunc_ids, we only match the owner for module btf id sets. See following commits for background on use of: CONFIG_X86 ifdef: 569c484f9995 (bpf: Limit static tcp-cc functions in the .BTF_ids list to x86) CONFIG_DYNAMIC_FTRACE ifdef: 7aae231ac93b (bpf: tcp: Limit calling some tcp cc functions to CONFIG_DYNAMIC_FTRACE) Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20211002011757.311265-6-memxor@gmail.com