linux/scripts/dtc/Makefile, branch v5.8

scripts/dtc: use pkg-config to include in non-standard path

2020-06-08T19:14:00Z

Commit 067c650c456e ("dtc: Use pkg-config to locate libyaml") added 'pkg-config --libs' to link libyaml installed in a non-standard location. yamltree.c includes , but that commit did not add the search path for . If /usr/include/yaml.h does not exist, it fails to build. A user can explicitly pass HOSTCFLAGS to work around it, but the policy is not consistent. There are two ways to deal with libraries in a non-default location. [1] Use HOSTCFLAGS and HOSTLDFLAGS for additional search paths for headers and libraries. They are documented in Documentation/kbuild/kbuild.rst $ make HOSTCFLAGS='-I /include' HOSTLDFLAGS='-L /lib' [2] Use pkg-config 'pkg-config --cflags' for querying the header search path 'pkg-config --libs' for querying the lib and its path If we go with pkg-config, use [2] consistently. Do not mix up [1] and [2]. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring

kbuild: check libyaml installation for 'make dt_binding_check'

2020-04-17T15:45:23Z

If you run 'make dtbs_check' without installing the libyaml package, the error message "dtc needs libyaml ..." is shown. This should be checked also for 'make dt_binding_check' because dtc needs to validate *.example.dts extracted from *.yaml files. It is missing since commit 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks"), but this fix-up is applicable only after commit e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command"). I gave the Fixes tag to the latter in case somebody is interested in back-porting this. Fixes: e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command") Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring

kbuild: allow to run dt_binding_check without kernel configuration

2020-03-13T01:04:36Z

The dt_binding_check target is located outside of the 'ifneq ($(dtstree),) ... endif' block. So, you can run 'make dt_binding_check' on any architecture. This makes a perfect sense because the dt-schema is arch-agnostic. The only one problem I see is that scripts/dtc/dtc is not always built. For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild descends into scripts/dtc/ with doing nothing. Then, it fails to build *.example.dt.yaml files. Let's build scripts/dtc/dtc forcibly when running dt_binding_check. The dt-schema does not depend on any CONFIG option either, so you should be able to run dt_binding_check without the .config file. Going forward, you can directly run 'make dt_binding_check' in a pristine source tree. Signed-off-by: Masahiro Yamada Reviewed-by: Rob Herring

kbuild: rename hostprogs-y/always to hostprogs/always-y

2020-02-03T16:53:07Z

In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada

dtc: Use pkg-config to locate libyaml

2019-11-04T17:21:07Z

Using Makefile's wildcard with absolute path to detect the presence of libyaml results in false-positive detection when cross-compiling e.g. in yocto environment. The latter results in build error: | scripts/dtc/yamltree.o: In function `yaml_propval_int': | yamltree.c: undefined reference to `yaml_sequence_start_event_initialize' | yamltree.c: undefined reference to `yaml_emitter_emit' | yamltree.c: undefined reference to `yaml_scalar_event_initialize' ... Use pkg-config to locate libyaml to address this scenario. Signed-off-by: Pavel Modilaynen [robh: silence stderr] Signed-off-by: Rob Herring

treewide: prefix header search paths with $(srctree)/

2019-05-18T02:49:57Z

Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada

kbuild: Add support for DT binding schema checks

2018-12-13T15:41:32Z

This adds the build infrastructure for checking DT binding schema documents and validating dts files using the binding schema. Check DT binding schema documents: make dt_binding_check Build dts files and check using DT binding schema: make dtbs_check Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to use for validation. This makes it easier to find and fix errors generated by a specific schema. Currently, the validation targets are separate from a normal build to avoid a hard dependency on the external DT schema project and because there are lots of warnings generated. Cc: Jonathan Corbet Cc: Mark Rutland Acked-by: Masahiro Yamada Cc: Michal Marek Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring

Merge branch 'all-dtbs' into dt/next

2018-10-04T19:16:15Z

kbuild: consolidate Devicetree dtb build rules

2018-10-02T14:23:21Z

There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon Acked-by: Paul Burton Acked-by: Ley Foon Tan Acked-by: Masahiro Yamada Cc: Michal Marek Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Yoshinori Sato Cc: Michal Simek Cc: Ralf Baechle Cc: James Hogan Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Zankel Cc: Max Filippov Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring

scripts/dtc: Update to upstream version v1.4.7-14-gc86da84d30e4

2018-09-20T18:31:10Z

Major changes are I2C and SPI bus checks, YAML output format (for future validation), some new libfdt functions, and more libfdt validation of dtbs. The YAML addition adds an optional dependency on libyaml. pkg-config is used to test for it and pkg-config became a kconfig dependency in 4.18. This adds the following commits from upstream: c86da84d30e4 Add support for YAML encoded output 361b5e7d8067 Make type_marker_length helper public bfbfab047e45 pylibfdt: Add a means to add and delete notes 9005f4108e7c pylibfdt: Allow delprop() to return errors b94c056b137e Make valgrind optional fd06c54d4711 tests: Better testing of dtc -I fs mode c3f50c9a86d9 tests: Allow dtbs_equal_unordered to ignore mem reserves 0ac9fdee37c7 dtc: trivial '-I fs -O dts' test 0fd1c8c783f3 pylibfdt: fdt_get_mem_rsv returns 2 uint64_t values 04853cad18f4 pylibfdt: Don't incorrectly / unnecessarily override uint64_t typemap 9619c8619c37 Kill bogus TYPE_BLOB marker type ac68ff92ae20 parser: add TYPE_STRING marker to path references 90a190eb04d9 checks: add SPI bus checks 53a1bd546905 checks: add I2C bus checks 88f18909db73 dtc: Bump version to v1.4.7 85bce8b2f06d tests: Correction to vg_prepare_blob() 57f7f9e7bc7c tests: Don't call memcmp() with NULL arguments c12b2b0c20eb libfdt: fdt_address_cells() and fdt_size_cells() 3fe0eeda0b7f livetree: Set phandle properties type to uint32 853649acceba pylibfdt: Support the sequential-write interface 9b0e4fe26093 tests: Improve fdt_resize() tests 1087504bb3e8 libfdt: Add necessary header padding in fdt_create() c72fa777e613 libfdt: Copy the struct region in fdt_resize() 32b9c6130762 Preserve datatype markers when emitting dts format 6dcb8ba408ec libfdt: Add helpers for accessing unaligned words 42607f21d43e tests: Fix incorrect check name 'prop_name_chars' 9d78c33bf8a1 tests: fix grep for checks error messages b770f3d1c13f pylibfdt: Support setting the name of a node 2f0d07e678e0 pylibfdt: Add functions to set and get properties as strings 354d3dc55939 pylibfdt: Update the bytearray size with pack() 3c374d46acce pylibfdt: Allow reading integer values from properties 49d32ce40bb4 pylibfdt: Use an unsigned type for fdt32_t 481246a0c13a pylibfdt: Avoid accessing the internal _fdt member in tests 9aafa33d99ed pylibfdt: Add functions to update properties 5a598671fdbf pylibfdt: Support device-tree creation/expansion 483e170625e1 pylibfdt: Add support for reading the memory reserve map 29bb05aa4200 pylibfdt: Add support for the rest of the header functions 582a7159a5d0 pylibfdt: Add support for fdt_next_node() f0f8c9169819 pylibfdt: Reorder functions to match libfdt.h 64a69d123935 pylibfdt: Return string instead of bytearray from getprop() 4d09a83420df fdtput: Add documentation e617cbe1bd67 fdtget: Add documentation 180a93924014 Use format specifiers in a bunch of places we should b9af3b396576 scripts/dtc: Fixed format mismatch in fprintf 4b8fcc3d015c libfdt: Add fdt_check_full() function c14223fb2292 tests: Use valgrind client requests for better checking 5b67d2b955a3 tests: Better handling of valgrind errors saving blobs e2556aaeb506 tests: Remove unused #define fb9c6abddaa8 Use size_t for blob lengths in utilfdt_read* 0112fda03bf6 libfdt: Add fdt_header_size() 6473a21d8bfe Consolidate utilfdt_read_len() variants d5db5382c5e5 libfdt: Safer access to memory reservations 719d582e98ec libfdt: Propagate name errors in fdt_getprop_by_offset() 70166d62a27f libfdt: Safer access to strings section eb890c0f77dc libfdt: Make fdt_check_header() more thorough 899d6fad93f3 libfdt: Improve sequential write state checking 04b5b4062ccd libfdt: Clean up header checking functions 44d3efedc816 Preserve datatype information when parsing dts f0be81bd8de0 Make Property a subclass of bytearray 24b1f3f064d4 pylibfdt: Add a method to access the device tree directly Signed-off-by: Rob Herring