linux/scripts/dtc, branch v5.6

scripts/dtc: Remove redundant YYLOC global declaration

2020-03-27T14:31:13Z

gcc 10 will default to -fno-common, which causes this error at link time: (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to: dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors which means the declaration is completely redundant and can just be dropped. Signed-off-by: Dirk Mueller Signed-off-by: David Gibson [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring

kbuild: rename hostprogs-y/always to hostprogs/always-y

2020-02-03T16:53:07Z

In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada

scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"

2020-01-28T16:21:47Z

This reverts upstream commit 18d7b2f4ee45fec422b7d82bab0b3c762ee907e4. A revert in upstream dtc is pending. This commit didn't work for properties such as 'interrupt-map' that have phandle in the middle of an entry. It would also not work for a 0 or -1 phandle value that acts as a NULL. Signed-off-by: Rob Herring

scripts/dtc: Update to upstream version v1.5.1-22-gc40aeb60b47a

2019-12-26T22:39:13Z

This adds the following commits from upstream: c40aeb60b47a travis.yml: Run tests on the non-x86 builders, too 9f86aff444f4 Add .cirrus.yml for FreeBSD build 34c82275bae6 Avoid gnu_printf attribute when using Clang 743000931bc9 tests: default to 'cc' if CC not set adcd676491cc Add test-case for trailing zero d9c55f855b65 Remove trailing zero from the overlay path 7a22132c79ec pylibfdt: Adjust for deprecated test methods dbe80d577ee2 tests: add extension to sed -i for GNU/BSD sed compatibility af57d440d887 libfdt: Correct prototype for fdt_ro_probe_() 6ce585ac153b Use correct inttypes.h format specifier 715028622547 support byacc in addition to bison fdf3f6d897ab pylibfdt: Correct the type for fdt_property_stub() 430419c28100 tests: fix some python warnings 588a29ff2e4e util: use gnu_printf format attribute bc876708ab1d fstree: replace lstat with stat 4c3c4ccb9916 dumptrees: pass outputdir as first argument aa522da9fff6 tests: allow out-of-tree test run 0d0d0fa51b1f fdtoverlay: Return non-zero exit code if overlays can't be applied 4605eb047b38 Add .editorconfig 18d7b2f4ee45 yamltree: Ensure consistent bracketing of properties with phandles 67f790c1adcc libfdt.h: add explicit cast from void* to uint8_t* in fdt(32|64)_st b111122ea5eb pylibfdt: use python3 shebang 60e0db3d65a1 Ignore phandle properties in /aliases 95ce19c14064 README: update for Python 3 5345db19f615 livetree: simplify condition in get_node_by_path b8d6eca78210 libfdt: Allow #size-cells of 0 184f51099471 Makefile: Add EXTRA_CFLAGS variable 812b1956a076 libfdt: Tweak data handling to satisfy Coverity 5c715a44776a fdtoverlay: Ignore symbols in overlays which don't apply to the target tree b99353474850 fdtoverlay: Allow adding labels to __overlay__ nodes in overlays d6de81b81b68 pylibfdt: Add support for fdt_get_alias() 1c17714dbb3a pylibfdt: Correct the FdtSw example ad57e4574a37 tests: Add a failed test case for 'fdtoverlay' with long target path bbe3b36f542b fdtoverlay: Rework output allocation 6c2e61f08396 fdtoverlay: Improve error messages 297f5abb362e fdtoverlay: Check for truncated overlay blobs Cc: Frank Rowand Cc: clang-built-linux@googlegroups.com Signed-off-by: Rob Herring

dtc: Use pkg-config to locate libyaml

2019-11-04T17:21:07Z

Using Makefile's wildcard with absolute path to detect the presence of libyaml results in false-positive detection when cross-compiling e.g. in yocto environment. The latter results in build error: | scripts/dtc/yamltree.o: In function `yaml_propval_int': | yamltree.c: undefined reference to `yaml_sequence_start_event_initialize' | yamltree.c: undefined reference to `yaml_emitter_emit' | yamltree.c: undefined reference to `yaml_scalar_event_initialize' ... Use pkg-config to locate libyaml to address this scenario. Signed-off-by: Pavel Modilaynen [robh: silence stderr] Signed-off-by: Rob Herring

scripts/dtc: dtx_diff - add color output support

2019-11-04T17:21:07Z

Add new -c/--color options, to enhance the diff output with color, and improve the user's experience. Signed-off-by: Geert Uytterhoeven Reviewed-by: Frank Rowand Tested-by: Frank Rowand Signed-off-by: Rob Herring

Merge tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2019-07-12T01:35:30Z

Pull Devicetree updates from Rob Herring: - DT binding schema examples are now validated against the schemas. Various examples are fixed due to that. - Sync dtc with upstream version v1.5.0-30-g702c1b6c0e73 - Initial schemas for networking bindings. This includes ethernet, phy and mdio common bindings with several Allwinner and stmmac converted to the schema. - Conversion of more Arm top-level SoC/board bindings to DT schema - Conversion of PSCI binding to DT schema - Rework Arm CPU schema to coexist with other CPU schemas - Add a bunch of missing vendor prefixes and new ones for SoChip, Sipeed, Kontron, B&R Industrial Automation GmbH, and Espressif - Add Mediatek UART RX wakeup support to binding - Add reset to ST UART binding - Remove some Linuxisms from the endianness common-properties.txt binding - Make the flattened DT read-only after init - Ignore disabled reserved memory nodes - Clean-up some dead code in FDT functions * tag 'devicetree-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits) dt-bindings: vendor-prefixes: add Sipeed dt-bindings: vendor-prefixes: add SoChip dt-bindings: 83xx-512x-pci: Drop cell-index property dt-bindings: serial: add documentation for Rx in-band wakeup support dt-bindings: arm: Convert RDA Micro board/soc bindings to json-schema of: unittest: simplify getting the adapter of a client of/fdt: pass early_init_dt_reserve_memory_arch() with bool type nomap of/platform: Drop superfluous cast in of_device_make_bus_id() dt-bindings: usb: ehci: Fix example warnings dt-bindings: net: Use phy-mode instead of phy-connection-type dt-bindings: simple-framebuffer: Add requirement for pipelines dt-bindings: display: Fix simple-framebuffer example dt-bindings: net: mdio: Add child nodes dt-bindings: net: mdio: Add address and size cells dt-bindings: net: mdio: Add a nodename pattern dt-bindings: mtd: sunxi-nand: Drop 'maxItems' from child 'reg' property dt-bindings: arm: Limit cpus schema to only check Arm 'cpu' nodes dt-bindings: backlight: lm3630a: correct schema validation dt-bindings: net: dwmac: Deprecate the PHY reset properties dt-bindings: net: sun8i-emac: Convert the binding to a schemas ...

scripts/dtc: Update to upstream version v1.5.0-30-g702c1b6c0e73

2019-06-21T18:53:52Z

Pull in SPDX tag conversion from upstream dtc. This will replace the conversion done in the kernel tree copy in v5.2-rc2. This adds the following commits from upstream: 702c1b6c0e73 README.license: Update to reflect SPDX tag usage 4097bbffcf1d dtc: Add GPLv2 SPDX tags to files missing license text 94f87cd5b7c5 libfdt: Add dual GPL/BSD SPDX tags to files missing license text c4ffc05574b1 tests: Replace license boilerplate with SPDX tags a5ac29baacd2 pylibfdt: Replace dual GPLv2/BSD license boilerplate with SPDX tags 7fb0f4db2eb7 libfdt: Replace GPL/BSD boilerplate/reference with SPDX tags acfe84f2c47e dtc: Replace GPLv2 boilerplate/reference with SPDX tags Reviewed-by: Greg Kroah-Hartman Signed-off-by: Rob Herring

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 473

2019-06-19T15:09:11Z

Based on 1 normalized pattern(s): this file is subject to the terms and conditions of the gnu general public license v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081203.508532280@linutronix.de Signed-off-by: Greg Kroah-Hartman

scripts/dtc: Update to upstream version v1.5.0-23-g87963ee20693

2019-06-12T13:05:52Z

This adds the following commits from upstream: 87963ee20693 livetree: add missing type markers in generated overlay properties 825146d13dc0 Fix typos in various documentation and source files 25bb080c18d1 Update the GPL2 text to the latest revision 243176c4ce84 Fix bogus error on rebuild ce01b21098a4 libfdt: Add FDT_CREATE_FLAG_NO_NAME_DEDUP flag that trades size for speed fbb62754ce45 libfdt: Introduce fdt_create_with_flags() 228a44cce857 libfdt: Ensure fdt_add_property frees allocated name string on failure 8f695676227b Avoid assertion in check_interrupts_property() 5c3513f68921 Link tools and tests against libfdt shared library 00f9febf9c16 tests: Rename tests.sh to testutils.sh c5d45188f923 Clean up LDLIBS handling 6ef8fcd05b74 Rebuild libfdt shared object if versioning linker script changes 26ee65a16c38 Use Python3 by default cca6546244cb libfdt: Make fdt_get_max_phandle() an inline 730875016a6a libfdt: Add phandle generation helper 7dfb61ba96b1 libfdt: Use fdt_find_max_phandle() 2bc5b66d7f6c libfdt: Add new maximum phandle lookup function 7fcf8208b8a9 libfdt: add fdt_append_addrrange() ae795b2db7a4 checks: Do not omit nodes with labels if symbol generation is requested eac2ad495b29 Update version.lds again f67b47135523 Revert "libfdt: Add phandle generation helper" 54ea41c22415 libfdt: Add phandle generation helper 4762ad051ee0 checks: Fix spelling in check_graph_endpoint d37f6b20107e Bump version to v1.5.0 a4b1a307ff3a pylibfdt:tests: Extend the way how to find a Python module 625dd8aaf20f pylibfdt: Change how passing tests are recognized 364631626bb7 pylibfdt: Test fdt.setprop take bytes on Python 3, add error handling cb0f454f73cc pylibfdt: check_err accepts only integer as a first argument. 4b68c6b3605a pylibfdt: Proper handling of bytes/unicode strings and octal literals 78e113e81c9d Use PRIxPTR for printing uintptr_t values ea7a8f6dad67 libfdt: Fix FDT_ERR_NOTFOUND typos in documentation 5aafd7ca43e0 libfdt: Fix fdt_getprop_by_offset() parameter name in documentation 7cbc550f903b checks: Add unit address check if node is enabled Signed-off-by: Rob Herring