linux/security/keys, branch v4.2

KEYS: ensure we free the assoc array edit if edit is valid

2015-07-28T03:08:23Z

__key_link_end is not freeing the associated array edit structure and this leads to a 512 byte memory leak each time an identical existing key is added with add_key(). The reason the add_key() system call returns okay is that key_create_or_update() calls __key_link_begin() before checking to see whether it can update a key directly rather than adding/replacing - which it turns out it can. Thus __key_link() is not called through __key_instantiate_and_link() and __key_link_end() must cancel the edit. CVE-2015-1333 Signed-off-by: Colin Ian King Signed-off-by: David Howells Signed-off-by: James Morris

switch keyctl_instantiate_key_common() to iov_iter

2015-04-12T02:27:12Z

Signed-off-by: Al Viro

Don't leak a key reference if request_key() tries to use a revoked keyring

2015-02-16T02:45:16Z

If a request_key() call to allocate and fill out a key attempts to insert the key structure into a revoked keyring, the key will leak, using memory and part of the user's key quota until the system reboots. This is from a failure of construct_alloc_key() to decrement the key's reference count after the attempt to insert into the requested keyring is rejected. key_put() needs to be called in the link_prealloc_failed callpath to ensure the unused key is released. Signed-off-by: David Jeffery Signed-off-by: David Howells Signed-off-by: James Morris

KEYS: Make /proc/keys unconditional if CONFIG_KEYS=y

2015-01-22T22:34:32Z

Now that /proc/keys is used by libkeyutils to look up a key by type and description, we should make it unconditional and remove CONFIG_DEBUG_PROC_KEYS. Reported-by: Jiri Kosina Signed-off-by: David Howells Tested-by: Jiri Kosina

KEYS: close race between key lookup and freeing

2015-01-05T15:58:01Z

When a key is being garbage collected, it's key->user would get put before the ->destroy() callback is called, where the key is removed from it's respective tracking structures. This leaves a key hanging in a semi-invalid state which leaves a window open for a different task to try an access key->user. An example is find_keyring_by_name() which would dereference key->user for a key that is in the process of being garbage collected (where key->user was freed but ->destroy() wasn't called yet - so it's still present in the linked list). This would cause either a panic, or corrupt memory. Fixes CVE-2014-9529. Signed-off-by: Sasha Levin Signed-off-by: David Howells

KEYS: remove a bogus NULL check

2014-12-16T07:05:20Z

We already checked if "desc" was NULL at the beginning of the function and we've dereferenced it so this causes a static checker warning. Signed-off-by: Dan Carpenter Signed-off-by: David Howells Signed-off-by: James Morris

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus

2014-12-16T01:49:10Z

KEYS: Fix stale key registration at error path

2014-12-07T02:50:36Z

When loading encrypted-keys module, if the last check of aes_get_sizes() in init_encrypted() fails, the driver just returns an error without unregistering its key type. This results in the stale entry in the list. In addition to memory leaks, this leads to a kernel crash when registering a new key type later. This patch fixes the problem by swapping the calls of aes_get_sizes() and register_key_type(), and releasing resources properly at the error paths. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=908163 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Mimi Zohar

KEYS: request_key() should reget expired keys rather than give EKEYEXPIRED

2014-12-01T22:52:53Z

Since the keyring facility can be viewed as a cache (at least in some applications), the local expiration time on the key should probably be viewed as a 'needs updating after this time' property rather than an absolute 'anyone now wanting to use this object is out of luck' property. Since request_key() is the main interface for the usage of keys, this should update or replace an expired key rather than issuing EKEYEXPIRED if the local expiration has been reached (ie. it should refresh the cache). For absolute conditions where refreshing the cache probably doesn't help, the key can be negatively instantiated using KEYCTL_REJECT_KEY with EKEYEXPIRED given as the error to issue. This will still cause request_key() to return EKEYEXPIRED as that was explicitly set. In the future, if the key type has an update op available, we might want to upcall with the expired key and allow the upcall to update it. We would pass a different operation name (the first column in /etc/request-key.conf) to the request-key program. request_key() returning EKEYEXPIRED is causing an NFS problem which Chuck Lever describes thusly: After about 10 minutes, my NFSv4 functional tests fail because the ownership of the test files goes to "-2". Looking at /proc/keys shows that the id_resolv keys that map to my test user ID have expired. The ownership problem persists until the expired keys are purged from the keyring, and fresh keys are obtained. I bisected the problem to 3.13 commit b2a4df200d57 ("KEYS: Expand the capacity of a keyring"). This commit inadvertantly changes the API contract of the internal function keyring_search_aux(). The root cause appears to be that b2a4df200d57 made "no state check" the default behavior. "No state check" means the keyring search iterator function skips checking the key's expiry timeout, and returns expired keys. request_key_and_link() depends on getting an -EAGAIN result code to know when to perform an upcall to refresh an expired key. This patch can be tested directly by: keyctl request2 user debug:fred a @s keyctl timeout %user:debug:fred 3 sleep 4 keyctl request2 user debug:fred a @s Without the patch, the last command gives error EKEYEXPIRED, but with the command it gives a new key. Reported-by: Carl Hetherington Reported-by: Chuck Lever Signed-off-by: David Howells Tested-by: Chuck Lever

KEYS: Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flags

2014-12-01T22:52:50Z

Simplify KEYRING_SEARCH_{NO,DO}_STATE_CHECK flags to be two variations of the same flag. They are effectively mutually exclusive and one or the other should be provided, but not both. Keyring cycle detection and key possession determination are the only things that set NO_STATE_CHECK, except that neither flag really does anything there because neither purpose makes use of the keyring_search_iterator() function, but rather provides their own. For cycle detection we definitely want to check inside of expired keyrings, just so that we don't create a cycle we can't get rid of. Revoked keyrings are cleared at revocation time and can't then be reused, so shouldn't be a problem either way. For possession determination, we *might* want to validate each keyring before searching it: do you possess a key that's hidden behind an expired or just plain inaccessible keyring? Currently, the answer is yes. Note that you cannot, however, possess a key behind a revoked keyring because they are cleared on revocation. keyring_search() sets DO_STATE_CHECK, which is correct. request_key_and_link() currently doesn't specify whether to check the key state or not - but it should set DO_STATE_CHECK. key_get_instantiation_authkey() also currently doesn't specify whether to check the key state or not - but it probably should also set DO_STATE_CHECK. Signed-off-by: David Howells Tested-by: Chuck Lever