linux/tools/objtool/Makefile, branch v4.14

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

objtool: Disable GCC '-Wpacked' warnings

2017-07-28T06:33:32Z

Objtool is failing to build with GCC 4.4.7 due to the following warnings: cc1: warnings being treated as errors In file included from orc.h:21, from orc_gen.c:21: orc_types.h:86: error: packed attribute is unnecessary for ‘sp_offset’ orc_types.h:87: error: packed attribute is unnecessary for ‘bp_offset’ orc_types.h:88: error: packed attribute is unnecessary for ‘sp_reg’ I suspect those warnings are a GCC bug. But -Wpacked isn't very useful anyway, so just disable it. Signed-off-by: Josh Poimboeuf Cc: Arnd Bergmann Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 627fce14809b ("objtool: Add ORC unwind table generation") Link: http://lkml.kernel.org/r/76d85d7b5a87566465095c500bce222ff5d7b146.1501188854.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

objtool, x86: Add facility for asm code to provide unwind hints

2017-07-18T08:57:44Z

Some asm (and inline asm) code does special things to the stack which objtool can't understand. (Nor can GCC or GNU assembler, for that matter.) In such cases we need a facility for the code to provide annotations, so the unwinder can unwind through it. This provides such a facility, in the form of unwind hints. They're similar to the GNU assembler .cfi* directives, but they give more information, and are needed in far fewer places, because objtool can fill in the blanks by following branches and adjusting the stack pointer for pushes and pops. Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jiri Slaby Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/0f5f3c9104fca559ff4088bece1d14ae3bca52d5.1499786555.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

objtool: Implement stack validation 2.0

2017-06-30T08:19:19Z

This is a major rewrite of objtool. Instead of only tracking frame pointer changes, it now tracks all stack-related operations, including all register saves/restores. In addition to making stack validation more robust, this also paves the way for undwarf generation. Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Jiri Slaby Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/678bd94c0566c6129bcc376cddb259c4c5633004.1498659915.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

make use of make variable CURDIR instead of calling pwd

2016-12-11T11:12:56Z

make already provides the current working directory in a variable, so make use of it instead of forking a shell. Also replace usage of PWD by CURDIR. PWD is provided by most shells, but not all, so this makes the build system more robust. Signed-off-by: Uwe Kleine-König Signed-off-by: Michal Marek

objtool: Un-capitalize "Warning" for out-of-sync instruction decoder

2016-07-29T14:57:16Z

Change "Warning" to "warning" to make it look more like a GCC warning. Hopefully that will be enough to help the 0-day bot or other automated tools catch this warning earlier before it ends up in Linus's tree. Reported-by: Linus Torvalds Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/b1669f391a5db91040427fd9f8e1e79db18f9709.1469751119.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar

tools build: Fix objtool build with ARCH=x86_64

2016-07-22T19:37:44Z

The objtool build fails in a cross-compiled environment on a non-x86 host with "ARCH=x86_64": tools/objtool/objtool-in.o: In function `decode_instructions': tools/objtool/builtin-check.c:276: undefined reference to `arch_decode_instruction' We could override the ARCH environment variable and change it back to x86, similar to what the objtool Makefile was doing before; but it's tricky to override environment variables consistently. Instead, take a similar approach used by the Linux top-level Makefile and introduce a SRCARCH Makefile variable which evaluates to "x86" when ARCH is either "x86_64" or "x86". Reported-by: Stephen Rothwell Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: H. Peter Anvin Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20160722191920.ej62fnspnqurbaa7@treble Signed-off-by: Arnaldo Carvalho de Melo

objtool: Always use host headers

2016-07-22T19:28:46Z

From a conversation with Josh: From http://lkml.kernel.org/r/20160722034118.guckaniobf3f7czc@treble : It needs to be compiled with the host (powerpc) compiler, but then it needs to disassemble target (x86) files. ---- So use HOSTARCH instead of ARCH. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Josh Poimboeuf Cc: Namhyung Kim Cc: Stephen Rothwell Cc: Wang Nan Link: http://lkml.kernel.org/r/20160722034118.guckaniobf3f7czc@treble Link: http://lkml.kernel.org/n/tip-le1m1yzxnfpt3msbblu40nm8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH

2016-07-22T19:28:25Z

objtool's Makefile was setting up ARCH but fixing up just the x86_64 -> x86, using Makefile.arch will do the necessary fixups for all arches. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Josh Poimboeuf Cc: Namhyung Kim Cc: Stephen Rothwell Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-hbq0bbh03u2b722vozcyql31@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo

objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi

2016-07-15T20:29:20Z

So that it can find asm/bitsperlong.h to get the __BITS_PER_LONG definition. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Josh Poimboeuf Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-pr3pvskh65pey4po7t122z4j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo