linux/tools/testing/selftests/Makefile, branch v6.17

Merge tag 'nolibc-20250724-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc

2025-07-29T22:32:02Z

Pull nolibc updates from Thomas Weißschuh: "Highlights: - New supported architectures: SuperH, x32, MIPS n32/n64 - Adopt general kernel architectures names - Integrate the nolibc selftests into the kselftests framework - Various fixes and new syscall wrappers Two non-nolibc changes: - New arm64 selftest which depends on nolibc changes - General tools/ cross-compilation bugfix for s390 clang" * tag 'nolibc-20250724-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (30 commits) selftests/nolibc: add x32 test configuration tools/nolibc: define time_t in terms of __kernel_old_time_t selftests/nolibc: show failed run if test process crashes tools/nolibc: drop s390 clang target override tools/build: Fix s390(x) cross-compilation with clang tools/nolibc: avoid false-positive -Wmaybe-uninitialized through waitpid() selftests/nolibc: correctly report errors from printf() and friends selftests/nolibc: create /dev/full when running as PID 1 tools/nolibc: add support for clock_nanosleep() and nanosleep() kselftest/arm64: Add a test for vfork() with GCS selftests/nolibc: Add coverage of vfork() tools/nolibc: Provide vfork() tools/nolibc: Replace ifdef with if defined() in sys.h tools/nolibc: add support for SuperH selftests/nolibc: use file driver for QEMU serial selftests/nolibc: fix EXTRACONFIG variables ordering tools/nolibc: MIPS: add support for N64 and N32 ABIs tools/nolibc: MIPS: drop noreorder option tools/nolibc: MIPS: drop manual stack pointer alignment tools/nolibc: MIPS: drop $gp setup ...

selftests: print installation complete message

2025-07-07T21:34:03Z

Add installation complete message to Makefile install logic. Link: https://lore.kernel.org/r/20250703231747.37544-1-skhan@linuxfoundation.org Signed-off-by: Shuah Khan

selftests/nolibc: integrate with kselftests

2025-06-23T20:56:21Z

Hook up nolibc-test with the kselftests framework. This enables CI systems and developers to easily execute the tests. While nolibc-test does not emit KTAP output itself that is not a problem, as the kselftest executor will wrap the output in KTAP. Acked-by: Willy Tarreau Link: https://lore.kernel.org/r/20250620-nolibc-selftests-v1-4-f6b2ce7c5071@weissschuh.net Signed-off-by: Thomas Weißschuh

selftests: Add version file to kselftest installation dir

2025-06-17T20:22:18Z

As titled, adding version file to kselftest installation dir, so the user of the tarball can know which kernel version the tarball belongs to. Link: https://lore.kernel.org/r/20250610221248.819519-1-1997cui@gmail.com Signed-off-by: Tianyi Cui <1997cui@gmail.com> Signed-off-by: Shuah Khan

selftests: net: build net/lib dependency in all target

2025-06-03T10:21:04Z

We have the logic to include net/lib automatically for net related selftests. However, currently, this logic is only in install target which means only `make install` will have net/lib included. This commit adds the logic to all target so that all `make`, `make run_tests` and `make install` will have net/lib included in net related selftests. Signed-off-by: Bui Quang Minh Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python") Signed-off-by: Paolo Abeni

Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-05-28T22:24:36Z

Pull networking updates from Paolo Abeni: "Core: - Implement the Device Memory TCP transmit path, allowing zero-copy data transmission on top of TCP from e.g. GPU memory to the wire. - Move all the IPv6 routing tables management outside the RTNL scope, under its own lock and RCU. The route control path is now 3x times faster. - Convert queue related netlink ops to instance lock, reducing again the scope of the RTNL lock. This improves the control plane scalability. - Refactor the software crc32c implementation, removing unneeded abstraction layers and improving significantly the related micro-benchmarks. - Optimize the GRO engine for UDP-tunneled traffic, for a 10% performance improvement in related stream tests. - Cover more per-CPU storage with local nested BH locking; this is a prep work to remove the current per-CPU lock in local_bh_disable() on PREMPT_RT. - Introduce and use nlmsg_payload helper, combining buffer bounds verification with accessing payload carried by netlink messages. Netfilter: - Rewrite the procfs conntrack table implementation, improving considerably the dump performance. A lot of user-space tools still use this interface. - Implement support for wildcard netdevice in netdev basechain and flowtables. - Integrate conntrack information into nft trace infrastructure. - Export set count and backend name to userspace, for better introspection. BPF: - BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops programs and can be controlled in similar way to traditional qdiscs using the "tc qdisc" command. - Refactor the UDP socket iterator, addressing long standing issues WRT duplicate hits or missed sockets. Protocols: - Improve TCP receive buffer auto-tuning and increase the default upper bound for the receive buffer; overall this improves the single flow maximum thoughput on 200Gbs link by over 60%. - Add AFS GSSAPI security class to AF_RXRPC; it provides transport security for connections to the AFS fileserver and VL server. - Improve TCP multipath routing, so that the sources address always matches the nexthop device. - Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS, and thus preventing DoS caused by passing around problematic FDs. - Retire DCCP socket. DCCP only receives updates for bugs, and major distros disable it by default. Its removal allows for better organisation of TCP fields to reduce the number of cache lines hit in the fast path. - Extend TCP drop-reason support to cover PAWS checks. Driver API: - Reorganize PTP ioctl flag support to require an explicit opt-in for the drivers, avoiding the problem of drivers not rejecting new unsupported flags. - Converted several device drivers to timestamping APIs. - Introduce per-PHY ethtool dump helpers, improving the support for dump operations targeting PHYs. Tests and tooling: - Add support for classic netlink in user space C codegen, so that ynl-c can now read, create and modify links, routes addresses and qdisc layer configuration. - Add ynl sub-types for binary attributes, allowing ynl-c to output known struct instead of raw binary data, clarifying the classic netlink output. - Extend MPTCP selftests to improve the code-coverage. - Add tests for XDP tail adjustment in AF_XDP. New hardware / drivers: - OpenVPN virtual driver: offload OpenVPN data channels processing to the kernel-space, increasing the data transfer throughput WRT the user-space implementation. - Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC. - Broadcom asp-v3.0 ethernet driver. - AMD Renoir ethernet device. - ReakTek MT9888 2.5G ethernet PHY driver. - Aeonsemi 10G C45 PHYs driver. Drivers: - Ethernet high-speed NICs: - nVidia/Mellanox (mlx5): - refactor the steering table handling to significantly reduce the amount of memory used - add support for complex matches in H/W flow steering - improve flow streeing error handling - convert to netdev instance locking - Intel (100G, ice, igb, ixgbe, idpf): - ice: add switchdev support for LLDP traffic over VF - ixgbe: add firmware manipulation and regions devlink support - igb: introduce support for frame transmission premption - igb: adds persistent NAPI configuration - idpf: introduce RDMA support - idpf: add initial PTP support - Meta (fbnic): - extend hardware stats coverage - add devlink dev flash support - Broadcom (bnxt): - add support for RX-side device memory TCP - Wangxun (txgbe): - implement support for udp tunnel offload - complete PTP and SRIOV support for AML 25G/10G devices - Ethernet NICs embedded and virtual: - Google (gve): - add device memory TCP TX support - Amazon (ena): - support persistent per-NAPI config - Airoha: - add H/W support for L2 traffic offload - add per flow stats for flow offloading - RealTek (rtl8211): add support for WoL magic packet - Synopsys (stmmac): - dwmac-socfpga 1000BaseX support - add Loongson-2K3000 support - introduce support for hardware-accelerated VLAN stripping - Broadcom (bcmgenet): - expose more H/W stats - Freescale (enetc, dpaa2-eth): - enetc: add MAC filter, VLAN filter RSS and loopback support - dpaa2-eth: convert to H/W timestamping APIs - vxlan: convert FDB table to rhashtable, for better scalabilty - veth: apply qdisc backpressure on full ring to reduce TX drops - Ethernet switches: - Microchip (kzZ88x3): add ETS scheduler support - Ethernet PHYs: - RealTek (rtl8211): - add support for WoL magic packet - add support for PHY LEDs - CAN: - Adds RZ/G3E CANFD support to the rcar_canfd driver. - Preparatory work for CAN-XL support. - Add self-tests framework with support for CAN physical interfaces. - WiFi: - mac80211: - scan improvements with multi-link operation (MLO) - Qualcomm (ath12k): - enable AHB support for IPQ5332 - add monitor interface support to QCN9274 - add multi-link operation support to WCN7850 - add 802.11d scan offload support to WCN7850 - monitor mode for WCN7850, better 6 GHz regulatory - Qualcomm (ath11k): - restore hibernation support - MediaTek (mt76): - WiFi-7 improvements - implement support for mt7990 - Intel (iwlwifi): - enhanced multi-link single-radio (EMLSR) support on 5 GHz links - rework device configuration - RealTek (rtw88): - improve throughput for RTL8814AU - RealTek (rtw89): - add multi-link operation support - STA/P2P concurrency improvements - support different SAR configs by antenna - Bluetooth: - introduce HCI Driver protocol - btintel_pcie: do not generate coredump for diagnostic events - btusb: add HCI Drv commands for configuring altsetting - btusb: add RTL8851BE device 0x0bda:0xb850 - btusb: add new VID/PID 13d3/3584 for MT7922 - btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925 - btnxpuart: implement host-wakeup feature" * tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits) selftests/bpf: Fix bpf selftest build warning selftests: netfilter: Fix skip of wildcard interface test net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames net: openvswitch: Fix the dead loop of MPLS parse calipso: Don't call calipso functions for AF_INET sk. selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem net_sched: hfsc: Address reentrant enqueue adding class to eltree twice octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback octeontx2-pf: QOS: Perform cache sync on send queue teardown net: mana: Add support for Multi Vports on Bare metal net: devmem: ncdevmem: remove unused variable net: devmem: ksft: upgrade rx test to send 1K data net: devmem: ksft: add 5 tuple FS support net: devmem: ksft: add exit_wait to make rx test pass net: devmem: ksft: add ipv4 support net: devmem: preserve sockc_err page_pool: fix ugly page_pool formatting net: devmem: move list_add to net_devmem_bind_dmabuf. selftests: netfilter: nft_queue.sh: include file transfer duration in log message net: phy: mscc: Fix memory leak when using one step timestamping ...

Merge tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc

2025-05-27T18:27:09Z

Pull nolibc updates from Thomas Weißschuh: - New supported architectures: m68k, SPARC (32 and 64 bit) - Compatibility with kselftest_harness.h - A more robust mechanism to include all of nolibc from each header - Split existing features into new headers to simplify adoption - Compatibility with UBSAN and it is used in the testsuite - Many small new features focussing on usage in kselftests * tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits) selftests: harness: Stop using setjmp()/longjmp() selftests: harness: Add "variant" and "self" to test metadata selftests: harness: Add teardown callback to test metadata selftests: harness: Move teardown conditional into test metadata selftests: harness: Don't set setup_completed for fixtureless tests selftests: harness: Implement test timeouts through pidfd selftests: harness: Remove dependency on libatomic selftests: harness: Remove inline qualifier for wrappers selftests: harness: Mark functions without prototypes static selftests: harness: Ignore unused variant argument warning selftests: harness: Use C89 comment style selftests: harness: Add kselftest harness selftest selftests/nolibc: drop include guards around standard headers tools/nolibc: move NULL and offsetof() to sys/stddef.h tools/nolibc: move uname() and friends to sys/utsname.h tools/nolibc: move makedev() and friends to sys/sysmacros.h tools/nolibc: move getrlimit() and friends to sys/resource.h tools/nolibc: move reboot() to sys/reboot.h tools/nolibc: move prctl() to sys/prctl.h tools/nolibc: move mount() to sys/mount.h ...

selftests: can: Import tst-filter from can-tests

2025-05-21T16:03:56Z

Tests for the can subsystem have been in the can-tests repository[1] so far. Start moving the tests to kernel selftests by importing the current tst-filter test. The test is now named test_raw_filter and is substantially updated to be more aligned with the kernel selftests, follow the coding style, and simplify the validation of received CAN frames. We also include documentation of the test design. The test verifies that the single filters on raw CAN sockets work as expected. We intend to import more tests from can-tests and add additional test cases in the future. The goal of moving the CAN selftests into the tree is to align the tests more closely with the kernel, improve testing of CAN in general, and to simplify running the tests automatically in the various kernel CI systems. [1]: https://github.com/linux-can/can-tests Signed-off-by: Felix Maurer Reviewed-by: Vincent Mailhol Link: https://patch.msgid.link/87d289f333cba7bbcc9d69173ea1c320e4b5c3b8.1747833283.git.fmaurer@redhat.com Signed-off-by: Marc Kleine-Budde

selftests: harness: Add kselftest harness selftest

2025-05-21T13:32:27Z

Add a selftest for the kselftest harness itself so any changes can be validated. Signed-off-by: Thomas Weißschuh Reviewed-by: Muhammad Usama Anjum Acked-by: Shuah Khan Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-1-ee4dd5257135@linutronix.de Signed-off-by: Thomas Weißschuh

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-05-15T18:28:30Z

Cross-merge networking fixes after downstream PR (net-6.15-rc7). Conflicts: tools/testing/selftests/drivers/net/hw/ncdevmem.c 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array") 2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX") https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au Adjacent changes: net/core/devmem.c net/core/devmem.h 0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload") bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Jakub Kicinski