linux/tools/testing/selftests/net, branch v6.3

selftests: add the missing CONFIG_IP_SCTP in net config

2023-04-13T17:04:55Z

The selftest sctp_vrf needs CONFIG_IP_SCTP set in config when building the kernel, so add it. Fixes: a61bd7b9fef3 ("selftests: add a selftest for sctp vrf") Reported-by: Naresh Kamboju Signed-off-by: Xin Long Reviewed-by: Sridhar Samudrala Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski

selftests: openvswitch: adjust datapath NL message declaration

2023-04-13T17:01:23Z

The netlink message for creating a new datapath takes an array of ports for the PID creation. This shouldn't cause much issue but correct it for future cases where we need to do decode of datapath information that could include the per-cpu PID map. Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite") Signed-off-by: Aaron Conole Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.com Signed-off-by: Jakub Kicinski

selftests: mptcp: userspace pm: uniform verify events

2023-04-13T16:58:55Z

Simply adding a "sleep" before checking something is usually not a good idea because the time that has been picked can not be enough or too much. The best is to wait for events with a timeout. In this selftest, 'sleep 0.5' is used more than 40 times. It is always used before calling a 'verify_*' function except for this verify_listener_events which has been added later. At the end, using all these 'sleep 0.5' seems to work: the slow CIs don't complain so far. Also because it doesn't take too much time, we can just add two more 'sleep 0.5' to uniform what is done before calling a 'verify_*' function. For the same reasons, we can also delay a bigger refactoring to replace all these 'sleep 0.5' by functions waiting for events instead of waiting for a fix time and hope for the best. Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni Signed-off-by: Matthieu Baerts Signed-off-by: Jakub Kicinski

selftests: net: rps_default_mask.sh: delete veth link specifically

2023-04-06T01:59:32Z

When deleting the netns and recreating a new one while re-adding the veth interface, there is a small window of time during which the old veth interface has not yet been removed. This can cause the new addition to fail. To resolve this issue, we can either wait for a short while to ensure that the old veth interface is deleted, or we can specifically remove the veth interface. Before this patch: # ./rps_default_mask.sh empty rps_default_mask [ ok ] changing rps_default_mask dont affect existing devices [ ok ] changing rps_default_mask dont affect existing netns [ ok ] changing rps_default_mask affect newly created devices [ ok ] changing rps_default_mask don't affect newly child netns[II][ ok ] rps_default_mask is 0 by default in child netns [ ok ] RTNETLINK answers: File exists changing rps_default_mask in child ns don't affect the main one[ ok ] cat: /sys/class/net/vethC11an1/queues/rx-0/rps_cpus: No such file or directory changing rps_default_mask in child ns affects new childns devices./rps_default_mask.sh: line 36: [: -eq: unary operator expected [fail] expected 1 found changing rps_default_mask in child ns don't affect existing devices[ ok ] After this patch: # ./rps_default_mask.sh empty rps_default_mask [ ok ] changing rps_default_mask dont affect existing devices [ ok ] changing rps_default_mask dont affect existing netns [ ok ] changing rps_default_mask affect newly created devices [ ok ] changing rps_default_mask don't affect newly child netns[II][ ok ] rps_default_mask is 0 by default in child netns [ ok ] changing rps_default_mask in child ns don't affect the main one[ ok ] changing rps_default_mask in child ns affects new childns devices[ ok ] changing rps_default_mask in child ns don't affect existing devices[ ok ] Fixes: 3a7d84eae03b ("self-tests: more rps self tests") Signed-off-by: Hangbin Liu Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/20230404072411.879476-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski

selftests: net: devlink_port_split.py: skip test if no suitable device available

2023-03-17T00:38:05Z

The `devlink -j port show` command output may not contain the "flavour" key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with mlx4 driver and iproute2-5.15.0: {"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"}, "pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"}, "pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"}, "pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}} This will cause a KeyError exception. Create a validate_devlink_output() to check for this "flavour" from devlink command output to avoid this KeyError exception. Also let it handle the check for `devlink -j dev show` output in main(). Apart from this, if the test was not started because the max lanes of the designated device is 0. The script will still return 0 and thus causing a false-negative test result. Use a found_max_lanes flag to determine if these tests were skipped due to this reason and return KSFT_SKIP to make it more clear. Link: https://bugs.launchpad.net/bugs/1937133 Fixes: f3348a82e727 ("selftests: net: Add port split test") Signed-off-by: Po-Hsu Lin Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski

selftest: Add test for bind() conflicts.

2023-03-15T07:24:10Z

The test checks if (IPv4, IPv6) address pair properly conflict or not. * IPv4 * 0.0.0.0 * 127.0.0.1 * IPv6 * :: * ::1 If the IPv6 address is [::], the second bind() always fails. Signed-off-by: Kuniyuki Iwashima Signed-off-by: Jakub Kicinski

selftests: mptcp: userspace pm: fix printed values

2023-03-11T05:42:56Z

In case of errors, the printed message had the expected and the seen value inverted. This patch simply correct the order: first the expected value, then the one that has been seen. Fixes: 10d4273411be ("selftests: mptcp: userspace: print error details if any") Cc: stable@vger.kernel.org Acked-by: Geliang Tang Signed-off-by: Matthieu Baerts Signed-off-by: Jakub Kicinski

selftests: fib_tests: Add test cases for IPv4/IPv6 in route notify

2023-02-23T09:54:13Z

Add tests to check whether the total fib info length is calculated corretly in route notify process. Signed-off-by: Lu Wei Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20230222083629.335683-3-luwei32@huawei.com Signed-off-by: Paolo Abeni

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-02-21T17:29:25Z

Per-next-PR merge. net/smc/af_smc.c b5dd4d698171 ("net/smc: llc_conf_mutex refactor, replace it with rw_semaphore") e40b801b3603 ("net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()") https://lore.kernel.org/all/20230221124008.6303c330@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

selftest: fib_tests: Always cleanup before exit

2023-02-21T09:45:08Z

Usage of `set -e` before executing a command causes immediate exit on failure, without cleanup up the resources allocated at setup. This can affect the next tests that use the same resources, leading to a chain of failures. A simple fix is to always call cleanup function when the script exists. This approach is already used by other existing tests. Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose") Signed-off-by: Roxana Nicolescu Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com Signed-off-by: Paolo Abeni