linux/tools/testing/selftests/netfilter, branch v5.14

selftest: netfilter: add test case for unreplied tcp connections

2021-07-02T00:05:59Z

TCP connections in UNREPLIED state (only SYN seen) can be kept alive indefinitely, as each SYN re-sets the timeout. This means that even if a peer has closed its socket the entry never times out. This also prevents re-evaluation of configured NAT rules. Add a test case that sets SYN timeout to 10 seconds, then check that the nat redirection added later eventually takes effect. This is based off a repro script from Antonio Ojea. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

selftests: netfilter: add fib test case

2021-06-09T19:06:35Z

There is a bug report on netfilter.org bugzilla pointing to fib expression dropping ipv6 DAD packets. Add a test case that demonstrates this problem. Next patch excludes icmpv6 packets coming from any to linklocal. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

selftests: netfilter: flowtable bridge and vlan support

2021-03-24T19:48:39Z

This patch adds two new tests to cover bridge and vlan support: - Add a bridge device to the Router1 (nsr1) container and attach the veth0 device to the bridge. Set the IP address to the bridge device to exercise the bridge forwarding path. - Add vlan encapsulation between to the bridge device in the Router1 and one of the sender containers (ns1). Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller

selftests: netfilter: test nat port clash resolution interaction with tcp early demux

2021-02-27T23:25:16Z

Convert Antonio Ojeas bug reproducer to a kselftest. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso

selftests: netfilter: fix current year

2021-02-03T23:33:09Z

use date %Y instead of %G to read current year Problem appeared when running lkp-tests on 01/01/2021 Fixes: 48d072c4e8cd ("selftests: netfilter: add time counter check") Reported-by: kernel test robot Signed-off-by: Fabian Frederick Signed-off-by: Pablo Neira Ayuso

selftests: netfilter: Pass family parameter "-f" to conntrack tool

2021-01-10T08:38:15Z

Fix nft_conntrack_helper.sh false fail report: 1) Conntrack tool need "-f ipv6" parameter to show out ipv6 traffic items. 2) Sleep 1 second after background nc send packet, to make sure check is after this statement executed. False report: FAIL: ns1-lkjUemYw did not show attached helper ip set via ruleset PASS: ns1-lkjUemYw connection on port 2121 has ftp helper attached ... After fix: PASS: ns1-2hUniwU2 connection on port 2121 has ftp helper attached PASS: ns2-2hUniwU2 connection on port 2121 has ftp helper attached ... Fixes: 619ae8e0697a6 ("selftests: netfilter: add test case for conntrack helper assignment") Signed-off-by: Chen Yi Signed-off-by: Pablo Neira Ayuso

selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking

2021-01-07T22:42:31Z

Convert Christians bug description into a reproducer. Cc: Shuah Khan Reported-by: Christian Perle Signed-off-by: Florian Westphal Acked-by: Pablo Neira Ayuso Signed-off-by: Jakub Kicinski

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-10-16T01:42:13Z

Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...

Merge tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

2020-10-15T22:14:32Z

Pull kselftest updates from Shuah Khan: - speed up headers_install done during selftest build - add generic make nesting support - add support to select individual tests: Selftests build/install generates run_kselftest.sh script to run selftests on a target system. Currently the script doesn't have support for selecting individual tests. Add support for it. With this enhancement, user can select test collections (or tests) individually. e.g: run_kselftest.sh -c seccomp -t timers:posix_timers -t timers:nanosleep Additionally adds a way to list all known tests with "-l", usage with "-h", and perform a dry run without running tests with "-n". * tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: doc: dev-tools: kselftest.rst: Update examples and paths selftests/run_kselftest.sh: Make each test individually selectable selftests: Extract run_kselftest.sh and generate stand-alone test list selftests: Add missing gitignore entries selftests: more general make nesting support selftests: use "$(MAKE)" instead of "make" for headers_install

selftests: netfilter: extend nfqueue test case

2020-10-11T23:59:40Z

add a test with re-queueing: usespace doesn't pass accept verdict, but tells to re-queue to another nf_queue instance. Also, make the second nf-queue program use non-gso mode, kernel will have to perform software segmentation. Lastly, do not queue every packet, just one per second, and add delay when re-injecting the packet to the kernel. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso