linux/tools/testing/selftests, branch v6.4

Merge tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-06-23T00:59:51Z

Pull networking fixes from Paolo Abeni: "Including fixes from ipsec, bpf, mptcp and netfilter. Current release - regressions: - netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain - eth: mlx5e: - fix scheduling of IPsec ASO query while in atomic - free IRQ rmap and notifier on kernel shutdown Current release - new code bugs: - phy: manual remove LEDs to ensure correct ordering Previous releases - regressions: - mptcp: fix possible divide by zero in recvmsg() - dsa: revert "net: phy: dp83867: perform soft reset and retain established link" Previous releases - always broken: - sched: netem: acquire qdisc lock in netem_change() - bpf: - fix verifier id tracking of scalars on spill - fix NULL dereference on exceptions - accept function names that contain dots - netfilter: disallow element updates of bound anonymous sets - mptcp: ensure listener is unhashed before updating the sk status - xfrm: - add missed call to delete offloaded policies - fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets - selftests: fixes for FIPS mode - dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling - eth: sfc: use budget for TX completions Misc: - wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0" * tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits) revert "net: align SO_RCVMARK required privileges with SO_MARK" net: wwan: iosm: Convert single instance struct member to flexible array sch_netem: acquire qdisc lock in netem_change() selftests: forwarding: Fix race condition in mirror installation wifi: mac80211: report all unusable beacon frames mptcp: ensure listener is unhashed before updating the sk status mptcp: drop legacy code around RX EOF mptcp: consolidate fallback and non fallback state machine mptcp: fix possible list corruption on passive MPJ mptcp: fix possible divide by zero in recvmsg() mptcp: handle correctly disconnect() failures bpf: Force kprobe multi expected_attach_type for kprobe_multi link bpf/btf: Accept function names that contain dots Revert "net: phy: dp83867: perform soft reset and retain established link" net: mdio: fix the wrong parameters netfilter: nf_tables: Fix for deleting base chains with payload netfilter: nfnetlink_osf: fix module autoload netfilter: nf_tables: drop module reference after updating chain netfilter: nf_tables: disallow timeout for anonymous sets netfilter: nf_tables: disallow updates of anonymous sets ...

selftests: forwarding: Fix race condition in mirror installation

2023-06-22T08:03:07Z

When mirroring to a gretap in hardware the device expects to be programmed with the egress port and all the encapsulating headers. This requires the driver to resolve the path the packet will take in the software data path and program the device accordingly. If the path cannot be resolved (in this case because of an unresolved neighbor), then mirror installation fails until the path is resolved. This results in a race that causes the test to sometimes fail. Fix this by setting the neighbor's state to permanent in a couple of tests, so that it is always valid. Fixes: 35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d") Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Danielle Ratson Reviewed-by: Petr Machata Signed-off-by: Petr Machata Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com Signed-off-by: Paolo Abeni

Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2023-06-21T20:59:46Z

Daniel Borkmann says: ==================== pull-request: bpf 2023-06-21 We've added 7 non-merge commits during the last 14 day(s) which contain a total of 7 files changed, 181 insertions(+), 15 deletions(-). The main changes are: 1) Fix a verifier id tracking issue with scalars upon spill, from Maxim Mikityanskiy. 2) Fix NULL dereference if an exception is generated while a BPF subprogram is running, from Krister Johansen. 3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0, from Florent Revest. 4) Fix expected_attach_type enforcement for kprobe_multi link, from Jiri Olsa. 5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Force kprobe multi expected_attach_type for kprobe_multi link bpf/btf: Accept function names that contain dots selftests/bpf: add a test for subprogram extables bpf: ensure main program has an extable bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable. selftests/bpf: Add test cases to assert proper ID tracking on spill bpf: Fix verifier id tracking of scalars on spill ==================== Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski

Merge tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2023-06-21T00:20:22Z

Pull hotfixes from Andrew Morton: "19 hotfixes. 8 of these are cc:stable. This includes a wholesale reversion of the post-6.4 series 'make slab shrink lockless'. After input from Dave Chinner it has been decided that we should go a different way [1]" Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1] * tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: selftests/mm: fix cross compilation with LLVM mailmap: add entries for Ben Dooks nilfs2: prevent general protection fault in nilfs_clear_dirty_page() Revert "mm: vmscan: make global slab shrink lockless" Revert "mm: vmscan: make memcg slab shrink lockless" Revert "mm: vmscan: add shrinker_srcu_generation" Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless" Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred" Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()" Revert "mm: shrinkers: convert shrinker_rwsem to mutex" nilfs2: fix buffer corruption due to concurrent device reads scripts/gdb: fix SB_* constants parsing scripts: fix the gfp flags header path in gfp-translate udmabuf: revert 'Add support for mapping hugepages (v4)' mm/khugepaged: fix iteration in collapse_file memfd: check for non-NULL file_seals in memfd_create() syscall mm/vmalloc: do not output a spurious warning when huge vmalloc() fails mm/mprotect: fix do_mprotect_pkey() limit check writeback: fix dereferencing NULL mapping->host on writeback_page_template

Merge tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

2023-06-20T22:01:08Z

Pull tracing fixes from Steven Rostedt: - Fix MAINTAINERS file to point to proper mailing list for rtla and rv The mailing list pointed to linux-trace-devel instead of linux-trace-kernel. The former is for the tracing libraries and the latter is for anything in the Linux kernel tree. The wrong mailing list was used because linux-trace-kernel did not exist when rtla and rv were created. - User events: - Fix matching of dynamic events to their user events When user writes to dynamic_events file, a lookup of the registered dynamic events is made, but there were some cases that a match could be incorrectly made. - Add auto cleanup of user events Have the user events automatically get removed when the last reference (file descriptor) is closed. This was asked for to prevent leaks of user events hanging around needing admins to clean them up. - Add persistent logic (but not let user space use it yet) In some cases, having a persistent user event (one that does not get cleaned up automatically) is useful. But there's still debates about how to expose this to user space. The infrastructure is added, but the API is not. - Update the selftests Update the user event selftests to reflect the above changes" * tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/user_events: Document auto-cleanup and remove dyn_event refs selftests/user_events: Adapt dyn_test to non-persist events selftests/user_events: Ensure auto cleanup works as expected tracing/user_events: Add auto cleanup and future persist flag tracing/user_events: Track refcount consistently via put/get tracing/user_events: Store register flags on events tracing/user_events: Remove user_ns walk for groups selftests/user_events: Add perf self-test for empty arguments events selftests/user_events: Clear the events after perf self-test selftests/user_events: Add ftrace self-test for empty arguments events tracing/user_events: Fix the incorrect trace record for empty arguments events tracing: Modify print_fields() for fields output order tracing/user_events: Handle matching arguments that is null from dyn_events tracing/user_events: Prevent same name but different args event tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list

selftests/mm: fix cross compilation with LLVM

2023-06-19T20:19:35Z

Currently the MM selftests attempt to work out the target architecture by using CROSS_COMPILE or otherwise querying the host machine, storing the target architecture in a variable called MACHINE rather than the usual ARCH though as far as I can tell (including for x86_64) the value is the same as we would use for architecture. When cross compiling with LLVM we don't need a CROSS_COMPILE as LLVM can support many target architectures in a single build so this logic does not work, CROSS_COMPILE is not set and we end up selecting tests for the host rather than target architecture. Fix this by using the more standard ARCH to describe the architecture, taking it from the environment if specified. Link: https://lkml.kernel.org/r/20230614-kselftest-mm-llvm-v1-1-180523f277d3@kernel.org Signed-off-by: Mark Brown Cc: Nick Desaulniers Cc: Albert Ou Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Shuah Khan Cc: Tom Rix Signed-off-by: Andrew Morton

selftests: net: fcnal-test: check if FIPS mode is enabled

2023-06-16T05:24:01Z

There are some MD5 tests which fail when the kernel is in FIPS mode, since MD5 is not FIPS compliant. Add a check and only run those tests if FIPS mode is not enabled. Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests") Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF") Reviewed-by: David Ahern Signed-off-by: Magali Lemes Signed-off-by: Jakub Kicinski

selftests: net: vrf-xfrm-tests: change authentication and encryption algos

2023-06-16T05:24:01Z

The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede) algorithms for performing authentication and encryption, respectively. This causes the tests to fail when fips=1 is set, since these algorithms are not allowed in FIPS mode. Therefore, switch from hmac(md5) and cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant. Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms") Reviewed-by: David Ahern Signed-off-by: Magali Lemes Signed-off-by: Jakub Kicinski

selftests: net: tls: check if FIPS mode is enabled

2023-06-16T05:24:01Z

TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not FIPS compliant. When fips=1, this set of tests fails. Add a check and only run these tests if not in FIPS mode. Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests") Reviewed-by: Jakub Kicinski Signed-off-by: Magali Lemes Signed-off-by: Jakub Kicinski

selftests/harness: allow tests to be skipped during setup

2023-06-16T05:24:01Z

Before executing each test from a fixture, FIXTURE_SETUP is run once. When SKIP is used in FIXTURE_SETUP, the setup function returns early but the test still proceeds to run, unless another SKIP macro is used within the test definition, leading to some code repetition. Therefore, allow tests to be skipped directly from the setup function. Suggested-by: Jakub Kicinski Signed-off-by: Magali Lemes Signed-off-by: Jakub Kicinski