linux/tools, branch v5.12

Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

2021-04-25T16:48:46Z

Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix potential NULL pointer dereference in the auxtrace option parser - Fix access to PID in an array when setting a PID filter in 'perf ftrace' - Fix error return code in the 'perf data' tool and in maps__clone(), found using a static analysis tool from Huawei * tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf map: Fix error return code in maps__clone() perf ftrace: Fix access to pid in array when setting a pid filter perf auxtrace: Fix potential NULL pointer dereference perf data: Fix error return code in perf_data__create_dir()

tools/cgroup/slabinfo.py: updated to work on current kernel

2021-04-23T21:42:40Z

slabinfo.py script does not work with actual kernel version. First, it was unable to recognise SLUB susbsytem, and when I specified it manually it failed again with AttributeError: 'struct page' has no member 'obj_cgroups' .. and then again with File "tools/cgroup/memcg_slabinfo.py", line 221, in main memcg.kmem_caches.address_of_(), AttributeError: 'struct mem_cgroup' has no member 'kmem_caches' Link: https://lkml.kernel.org/r/cec1a75e-43b4-3d64-2084-d9f98fda037f@virtuozzo.com Signed-off-by: Vasily Averin Tested-by: Roman Gushchin Acked-by: Roman Gushchin Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

perf map: Fix error return code in maps__clone()

2021-04-23T19:03:09Z

Although 'err' has been initialized to -ENOMEM, but it will be reassigned by the "err = unwind__prepare_access(...)" statement in the for loop. So that, the value of 'err' is unknown when map__clone() failed. Fixes: 6c502584438bda63 ("perf unwind: Call unwind__prepare_access for forked thread") Reported-by: Hulk Robot Signed-off-by: Zhen Lei Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: zhen lei Link: http://lore.kernel.org/lkml/20210415092744.3793-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

perf ftrace: Fix access to pid in array when setting a pid filter

2021-04-23T18:58:10Z

Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6). The root cause is a missing pointer dereference which causes an array element address to be used as PID. Fix this by extracting the PID. Output before: # ./perf ftrace -v -- ls function_graph tracer is used write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument failed to set ftrace pid # Output after: ./perf ftrace -v -- ls function_graph tracer is used # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 4) | rcu_read_lock_sched_held() { 4) 0.552 us | rcu_lockdep_current_cpu_online(); 4) 6.124 us | } Reported-by: Alexander Schmidt Signed-off-by: Thomas Richter Acked-by: Namhyung Kim Cc: Heiko Carstens Cc: Sumanth Korikkar Cc: Sven Schnelle Cc: Vasily Gorbik Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo

perf auxtrace: Fix potential NULL pointer dereference

2021-04-23T18:34:32Z

In the function auxtrace_parse_snapshot_options(), the callback pointer "itr->parse_snapshot_options" can be NULL if it has not been set during the AUX record initialization. This can cause tool crashing if the callback pointer "itr->parse_snapshot_options" is dereferenced without performing NULL check. Add a NULL check for the pointer "itr->parse_snapshot_options" before invoke the callback. Fixes: d20031bb63dd6dde ("perf tools: Add AUX area tracing Snapshot Mode") Signed-off-by: Leo Yan Acked-by: Adrian Hunter Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Tiezhu Yang Link: http://lore.kernel.org/lkml/20210420151554.2031768-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo

perf data: Fix error return code in perf_data__create_dir()

2021-04-20T17:46:48Z

Although 'ret' has been initialized to -1, but it will be reassigned by the "ret = open(...)" statement in the for loop. So that, the value of 'ret' is unknown when asprintf() failed. Reported-by: Hulk Robot Signed-off-by: Zhen Lei Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

Merge tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-04-17T16:57:15Z

Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.12-rc8, including fixes from netfilter, and bpf. BPF verifier changes stand out, otherwise things have slowed down. Current release - regressions: - gro: ensure frag0 meets IP header alignment - Revert "net: stmmac: re-init rx buffers when mac resume back" - ethernet: macb: fix the restore of cmp registers Previous releases - regressions: - ixgbe: Fix NULL pointer dereference in ethtool loopback test - ixgbe: fix unbalanced device enable/disable in suspend/resume - phy: marvell: fix detection of PHY on Topaz switches - make tcp_allowed_congestion_control readonly in non-init netns - xen-netback: Check for hotplug-status existence before watching Previous releases - always broken: - bpf: mitigate a speculative oob read of up to map value size by tightening the masking window - sctp: fix race condition in sctp_destroy_sock - sit, ip6_tunnel: Unregister catch-all devices - netfilter: nftables: clone set element expression template - netfilter: flowtable: fix NAT IPv6 offload mangling - net: geneve: check skb is large enough for IPv4/IPv6 header - netlink: don't call ->netlink_bind with table lock held" * tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) netlink: don't call ->netlink_bind with table lock held MAINTAINERS: update my email bpf: Update selftests to reflect new error states bpf: Tighten speculative pointer arithmetic mask bpf: Move sanitize_val_alu out of op switch bpf: Refactor and streamline bounds check into helper bpf: Improve verifier error messages for users bpf: Rework ptr_limit into alu_limit and add common error path bpf: Ensure off_reg has no mixed signed bounds for all types bpf: Move off_reg into sanitize_ptr_alu bpf: Use correct permission flag for mixed signed bounds arithmetic ch_ktls: do not send snd_una update to TCB in middle ch_ktls: tcb close causes tls connection failure ch_ktls: fix device connection close ch_ktls: Fix kernel panic i40e: fix the panic when running bpf in xdpdrv mode net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta net/mlx5e: Fix setting of RS FEC mode net/mlx5: Fix setting of devlink traps in switchdev mode Revert "net: stmmac: re-init rx buffers when mac resume back" ...

ia64: tools: remove duplicate definition of ia64_mf() on ia64

2021-04-16T23:10:37Z

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in on ia64 which causes libbpf failing to build: CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o In file included from /usr/src/linux/tools/include/asm/barrier.h:24, from /usr/src/linux/tools/include/linux/ring_buffer.h:4, from libbpf.c:37: /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror] 43 | #define ia64_mf() asm volatile ("mf" ::: "memory") | In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20, from /usr/include/ia64-linux-gnu/asm/swab.h:11, from /usr/include/linux/swab.h:8, from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/ia64-linux-gnu/asm/byteorder.h:5, from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20, from libbpf.c:36: /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition 382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory") | cc1: all warnings being treated as errors Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h. Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ia64: tools: remove inclusion of ia64-specific version of errno.h header

2021-04-16T23:10:37Z

There is no longer an ia64-specific version of the errno.h header below arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with: CC /usr/src/linux/tools/bpf/bpftool/btf_dumper.o In file included from /usr/src/linux/tools/include/linux/err.h:8, from btf_dumper.c:11: /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory 13 | #include "../../../arch/ia64/include/uapi/asm/errno.h" | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. Thus, just remove the inclusion of the ia64-specific errno.h so that the build will use the generic errno.h header on this target which was used there anyway as the ia64-specific errno.h was just a wrapper for the generic header. Fixes: c25f867ddd00 ("ia64: remove unneeded uapi asm-generic wrappers") Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2021-04-16T22:48:08Z

Daniel Borkmann says: ==================== pull-request: bpf 2021-04-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 9 day(s) which contain a total of 8 files changed, 175 insertions(+), 111 deletions(-). The main changes are: 1) Fix a potential NULL pointer dereference in libbpf's xsk umem handling, from Ciara Loftus. 2) Mitigate a speculative oob read of up to map value size by tightening the masking window, from Daniel Borkmann. ==================== Signed-off-by: David S. Miller