linux/tools, branch v5.3

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-09-14T19:20:38Z

Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...

kselftests: cgroup: add freezer mkdir test

2019-09-12T21:04:40Z

Add a new cgroup freezer selftest, which checks that if a cgroup is frozen, their new child cgroups will properly inherit the frozen state. It creates a parent cgroup, freezes it, creates a child cgroup and populates it with a dummy process. Then it checks that both parent and child cgroup are frozen. Signed-off-by: Roman Gushchin Cc: Tejun Heo Cc: Shuah Khan Signed-off-by: Tejun Heo

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

2019-09-06T13:09:16Z

Steffen Klassert says: ==================== pull request (net): ipsec 2019-09-05 1) Several xfrm interface fixes from Nicolas Dichtel: - Avoid an interface ID corruption on changelink. - Fix wrong intterface names in the logs. - Fix a list corruption when changing network namespaces. - Fix unregistation of the underying phydev. 2) Fix a potential warning when merging xfrm_plocy nodes. From Florian Westphal. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller

selftest: A few cleanups for fib_nexthops.sh

2019-09-05T09:59:39Z

Cleanups of the tests in fib_nexthops.sh 1. Several tests noted unexpected route output, but the discrepancy was not showing in the summary output and overlooked in the verbose output. Add a WARNING message to the summary output to make it clear a test is not showing expected output. 2. Several check_* calls are missing extra data like scope and metric causing mismatches when the nexthops or routes are correct - some of them are a side effect of the evolving iproute2 command. Update the data to the expected output. 3. Several check_routes are checking for the wrong nexthop data, most likely a copy-paste-update error. 4. A couple of tests were re-using a nexthop id that already existed. Fix those to use a new id. Fixes: 6345266a9989 ("selftests: Add test cases for nexthop objects") Signed-off-by: David Ahern Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-09-02T01:45:28Z

Pull networking fixes from David Miller: 1) Fix some length checks during OGM processing in batman-adv, from Sven Eckelmann. 2) Fix regression that caused netfilter conntrack sysctls to not be per-netns any more. From Florian Westphal. 3) Use after free in netpoll, from Feng Sun. 4) Guard destruction of pfifo_fast per-cpu qdisc stats with qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed in pfifo_fast_enqueue(). 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet. 6) Handle neigh events on internal ports correctly in nfp, from John Hurley. 7) Clear SKB timestamp in NF flow table code so that it does not confuse fq scheduler. From Florian Westphal. 8) taprio destroy can crash if it is invoked in a failure path of taprio_init(), because the list head isn't setup properly yet and the list del is unconditional. Perform the list add earlier to address this. From Vladimir Oltean. 9) Make sure to reapply vlan filters on device up, in aquantia driver. From Dmitry Bogdanov. 10) sgiseeq driver releases DMA memory using free_page() instead of dma_free_attrs(). From Christophe JAILLET. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) net: seeq: Fix the function used to release some memory in an error handling path enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions net: bcmgenet: use ethtool_op_get_ts_info() tc-testing: don't hardcode 'ip' in nsPlugin.py net: dsa: microchip: add KSZ8563 compatibility string dt-bindings: net: dsa: document additional Microchip KSZ8563 switch net: aquantia: fix out of memory condition on rx side net: aquantia: linkstate irq should be oneshot net: aquantia: reapply vlan filters on up net: aquantia: fix limit of vlan filters net: aquantia: fix removal of vlan 0 net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte taprio: Fix kernel panic in taprio_destroy net: dsa: microchip: fill regmap_config name rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] net: stmmac: dwmac-rk: Don't fail if phy regulator is absent amd-xgbe: Fix error path in xgbe_mod_init() netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder mac80211: Correctly set noencrypt for PAE frames ...

Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

2019-09-01T17:39:25Z

Pull turbostat updates from Len Brown: "User-space turbostat (and x86_energy_perf_policy) patches. They are primarily bug fixes from users" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL tools/power turbostat: Fix caller parameter of get_tdp_amd() tools/power turbostat: Fix CPU%C1 display value tools/power turbostat: do not enforce 1ms tools/power turbostat: read from pipes too tools/power turbostat: Add Ice Lake NNPI support tools/power turbostat: rename has_hsw_msrs() tools/power turbostat: Fix Haswell Core systems tools/power turbostat: add Jacobsville support tools/power turbostat: fix buffer overrun tools/power turbostat: fix file descriptor leaks tools/power turbostat: fix leak of file descriptor on error return path tools/power turbostat: Make interval calculation per thread to reduce jitter tools/power turbostat: remove duplicate pc10 column tools/power x86_energy_perf_policy: Fix argument parsing tools/power: Fix typo in man page tools/power/x86: Enable compiler optimisations and Fortify by default tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2

tc-testing: don't hardcode 'ip' in nsPlugin.py

2019-09-01T06:47:25Z

the following tdc test fails on Fedora: # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it -----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact" -----> prepare stage *** Error message: "/bin/sh: ip: command not found" returncode 127; expected [0] -----> prepare stage *** Aborting test run. Let nsPlugin.py use the 'IP' variable introduced with commit 92c1a19e2fb9 ("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is correctly resolved to the value we have in tdc_config.py. # ./tdc.py -e 2638 -- ns/SubPlugin.__init__ Test 2638: Add matchall and try to get it All test results: 1..1 ok 1 2638 - Add matchall and try to get it Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc") Reported-by: Hangbin Liu Signed-off-by: Davide Caratti Acked-by: Nicolas Dichtel Signed-off-by: David S. Miller

tools/power turbostat: update version number

2019-08-31T18:48:39Z

Today is 19.08.31, at least in some parts of the world. Signed-off-by: Len Brown

tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL

2019-08-31T18:48:39Z

Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") and the commit 3316f99a9f1b68c578c5 ("tools/power turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h RAPL support. Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX, and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon Dhyana Family 18h support for RAPL. Already tested on Hygon multi-node systems and it shows correct per-core energy usage and the total package power. Signed-off-by: Pu Wen Reviewed-by: Calvin Walton Signed-off-by: Len Brown

tools/power turbostat: Fix caller parameter of get_tdp_amd()

2019-08-31T18:48:39Z

Commit 9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU family. But the rapl_probe_amd() function use wrong model parameter. Fix the wrong caller parameter of get_tdp_amd() to use family. Cc: # v5.1+ Signed-off-by: Pu Wen Reviewed-by: Calvin Walton Signed-off-by: Len Brown